• 인지과학
• /
• 제19권3호
• /
• pp.311-330
• /
• 2008

주의가 주어진 위치에 발현되는 공간적 주의는 주의 착점으로부터 거리가 멀어질수록 점진적으로 감소한다. 이에 근거하여 지각과 단기 기억 수준에 작용하는 시각적 주의의 공간적 패턴을 조사하였다. 실험 1에서는 시야의 한 지점에 사전 단서(pre-cue)를 제시한 후 시각적 차폐를 동반한 표적 자극을 변별하는 지각적 처리 과제(perception-intensive task)와 차폐 자극이 없이 단서 위치의 항목을 기억해야 하는 기억 처리 과제(memory-intensiv, task)가 사용되었다. 지각 과제에서 표적 변별 정확도는 주의 착점에서 가장 높았고 인접한 위치에 제시된 표적일 경우 단서 위치로부터 거리가 멀어질수록 점진적으로 저하되었다. 반면에 기억 과제에서는 단서 위치에 제시된 기억 항목만이 정확히 재인되었으며 인접한 항목들에 대한 기억 재인은 우연 수준에 머물렀다. 실험 2는 지각 처리 과제에서도 객체(object) 수준의 공간적 주의가 작용함을 보여주어 기억 과제에서 관찰된 객체 중심적 주의 효과가 경우에 따라서는 지각적 처리 과정에서도 발현될 수 있음을 보여주었다. 이 결과는 선별적 주의 효과는 위치 중심적 모형의 예견에만 국한되지 않고 요구되는 정보 처리 수준의 공간적 특성에 따라 위치 중심적 또는 객체 중심적으로 융통성 있게 작용함을 시사한다.

• 디지털융복합연구
• /
• 제19권12호
• /
• pp.281-289
• /
• 2021

본 연구는 고용창출 및 지속가능경영의 토대가 되는 창업생태계의 구성요소들이 창업기업의 경영성과에 미치는 영향을 입지환경 매개효과를 중심으로 규명하는 것을 목표로 한다. 입지환경을 고려한 정부의 창업지원 정책과 병행된 창업의 대중화가 고용창출을 위한 하나의 대안이 될 수 있다는 결과를 제시함으로써, 창업생태계 구성요소와 입지환경 간 최적의 구성 시나리오를 만드는 데 시사점을 제공하고, 또한 창업기업의 경영성과 향상에도 기여할 것으로 판단된다. 이러한 연구목적을 위한 본 연구의 분석 대상은 국내 7년 이하 창업기업에 기여하는 주요 임직원이며, 온·오프라인 설문을 통해 자료를 수집하였다. 분석 방법으로는 SPSS 22.0을 사용하였으며, 리커트 5점 척도로 측정된 유효변수들에 대하여 기술통계분석, 탐색적 요인분석, 신뢰성 분석, 다중회귀 분석 및 매개분석을 활용하여 실증분석하였다. 분석의 결과, 창업생태계 구성요소는 창업기업 경영성과 및 입지환경에 유의미한 영향을 미치는 것으로 나타났다. 또한 입지환경의 매개에 따른 창업기업 경영성과에 대해서도 입지환경은 유의미한 영향을 미치는 것으로 나타났다. 이러한 결과들은 추후 수도권과 비수도권 등 지역별로 상이할 수 있는 창업생태계 현황 요소들과 경영성과 간 영향관계를 파악하는 후속연구에도 시사점을 제공할 것으로 기대한다.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.438-449
• /
• 2005

In this paper, we describes the information-theoretic approaches to sensor selection and sensor placement in sensor net­works for target localization and tracking. We have developed a sensor selection heuristic to activate the most informative candidate sensor for collaborative target localization and tracking. The fusion of the observation by the selected sensor with the prior target location distribution yields nearly the greatest reduction of the entropy of the expected posterior target location distribution. Our sensor selection heuristic is computationally less complex and thus more suitable to sensor networks with moderate computing power than the mutual information sensor selection criteria. We have also developed a method to compute the posterior target location distribution with the minimum entropy that could be achieved by the fusion of observations of the sensor network with a given deployment geometry. We have found that the covariance matrix of the posterior target location distribution with the minimum entropy is consistent with the Cramer-Rao lower bound (CRB) of the target location estimate. Using the minimum entropy of the posterior target location distribution, we have characterized the effect of the sensor placement geometry on the localization accuracy.

• 경영과학
• /
• 제26권3호
• /
• pp.23-35
• /
• 2009

This study deals with the location management in WCDMA (Wideband Code Division Multiple Access) networks. The new location management method is the one of the many techniques used to provide the packet switched (PS) services effectively in WCDMA networks. WCDMA introduces RA (routing area) for the PS services in addition to LA (location area) for the circuit switched (CS) services. WCDMA system also adopts the cooperative paging and the combined area update which are to decrease signaling traffic using the PS network resources for the CS services. Considering the characteristics of the WCDMA networks, this study formulate into the mathematical programming problem for the location management. Rather than the existing researches which consider the single MSC/SGSN networks, we deal with the multi MSC/SGSN networks, where both MSC area and SGSN area should be determined as well. Fairness between traffic loads of MSC/SGSN and the system cost incurred to MSC/SGSN are also incorporated into our model, which make the model more realistic. We propose greedy algorithms for the problems, which consists of the merger of two neighboring areas and the movement of an area. Extensive experiment has been done based on the realistic problem examples. Followed by the analysis of parameter effect on the final solutions and the quality of final solutions obtained by our greedy algorithms. Our proposed model and analysis result can be used to determine WCDMA system areas and to predict the system performance measures by the determination.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권2호
• /
• pp.121-133
• /
• 2003

This paper presents a fault location algorithm for a single phase-to-ground fault on 3-terminal transmission systems. The method uses only the local end voltage and current signals. Other currents used for the algorithm are estimated by current distribution factors and the local end current. Negative sequence current is used to remove the effect of load current. Five distance equations based on Kirchhoff's voltage law are established for the location algorithm which can be applied to a parallel transmission line having a teed circuit. Separating the real and imaginary parts of each distance equation, final nonlinear equations that are functions of the fault location can be obtained. The Newton-Raphson method is then applied to calculate the estimated fault location. Among the solutions, a correct fault distance is selected by the conditions of the existence of solution. With the results of extensive S/W and H/W simulation tests, it was verified that the proposed algorithm can estimate an accurate fault distance in a 154kV model system.

• 한국화재소방학회논문지
• /
• 제23권5호
• /
• pp.143-152
• /
• 2009

초고층건물의 수직통로에서 발생하는 연돌효과의 기체역학적 특성과 관련된 차압과 중성대의 위치 계산 및 연돌효과 발생의 가시화를 위하여 3가지 형태의 개구부를 갖는 단일 단순수직통로에 대하여 CFD 모델을 사용하여 수치해석을 하였다. 연돌효과의 차압은 이론식 계산 결과와 비교 시 수직통로의 높이가 높아질수록 차이가 커진다. 중성대 위치는 연돌효과 초기(t = 10s)에 Type A의 경우 수직통로의 높이가 30m 미만인, Type B의 경우 30m 이상인 모델에서 이론식 계산 결과와의 편차가 5% 미만으로 잘 일치한다. 따라서 수직통로 높이가 30m 이상인 다중개구부 수직통로(Type B)의 경우 CFD 모델을 사용하여 중성대 위치를 계산하는 것이 가능하다. 연돌효과의 가시화를 통하여 연돌효과의 공기 유동 현상을 쉽게 이해할 수 있다.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1149-1155
• /
• 1997

J-integral for a subsurface horizontal crack in a circular plate with an inner hole under rolling line contact is evaluated according to loading positions with various load conditions, crack length and crack location. Two-dimensional crack is modeled, and the relation between Tresca stress for uncracked model and J-integral is discussed. The loading location which gives the maximum J-integral depends on load condition and crack location, and the presence of friction force increases Tresca stress and J-integral near the surface. Regardless of friction force, crack location that gives maximum J-integral is the same as that of maximum Tresca stress in an uncracked model, and the value of J-integral is propotional to crack length. It is also showed that the variation of an inner radius of a disk does not effect J-integral value.

• 소성∙가공
• /
• 제12권2호
• /
• pp.134-140
• /
• 2003

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral hinge, which can flex over a million times without causing a failure. With such advantage manufacturing, time and cost required at the assembly stage can be eliminated by injecting the whole part as one piece. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature hinge failure can occur with the improper selection of gate locations. Therefore, it is necessary to optimize flow balancer in injection molding of part with hinges before actually producing molds. In this paper, resin flow patterns depending on several gate positions were investigated by numerical analyses of a simple strip part with a hinge. As a result, we found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed one of the proposed gate systems were conducted using polypropylene that contained 20% talc. The experiment showed that hinges without defects could be produced by using the designed gate location.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.472-484
• /
• 2002

To analyze the characteristics of air flow and $CO_2$ extinguishant transfer when extinguishant is injected into a closed space similar to marine engine room, a numerical simulation on a space was performed. Flow fields and $CO_2$ concentration fields are calculated according with the variation of the location & injection angle of nozzles. The results of simulation showed that the pattern of recirculation flow was affected greatly with the location & injection angle of nozzles and such a recirculation flow accelerated mass transfer of $CO_2$ and greatly affected the diffusion process of $CO_2$ extinguishant. It is considered that this result of this study can be useful to designing the arrangement of nozzles for the $CO_2$ fire fighting equipments in a marine engine room.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.69-78
• /
• 2013

The location of villages differs by position, and the method to form the conditions of location varies greatly. This study has comprehensively investigated village layout in the riverside and directional relations in houses. With changes in riverside landscape and transition to an agriculture-oriented village, there have been changes in road and the size, shape and direction of houses as well. In terms of the direction of houses situated along the river, a house facing the river accounts for more than half of all houses in the village. As traditional houses are transformed into modern houses over time, houses have become bigger, and the number of the houses facing south or southeast has been on the rise. As described above, riverside landscape and preference for the house facing south have an effect on determination of the facing direction of houses. However, the direction of geographical features of the village was first followed, and other conditions have been reflected, and the characteristics for the facing direction of houses have been observed.