• Journal of KIISE
• /
• v.43 no.3
• /
• pp.353-361
• /
• 2016

During image-guided radiation treatment of lung cancer patients, it is necessary to track the tumor motion because it can change during treatment as a consequence of respiratory motion and cardiac motion. In this paper, we propose a method for tracking the motion of the lung tumors based on the three-dimensional image information from planning 4D MDCT and treatment 4D CBCT images. First, to effectively track the tumor motion during treatment, the global motion of the tumor is estimated based on a tumor-specific motion model obtained from planning 4D MDCT images. Second, to increase the accuracy of the tumor motion tracking, the local motion of the tumor is estimated based on the structural information of the tumor from 4D CBCT images. To evaluate the performance of the proposed method, we estimated the tracking results of proposed method using digital phantom. The results show that the tumor localization error of local motion estimation is reduced by 45% as compared with that of global motion estimation.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.31-42
• /
• 2013

This paper proposes a photogrammetric rectification method based on Bayesian approach as a method that eliminates vertical parallax between stereo images to minimize visual fatigue of 3D contents. The image rectification consists of two phases; geometry estimation and epipolar transformation. For geometry estimation, coplanarity-based relative orientation algorithm was used in this paper. To ensure robustness for mismatch and localization error occurred by automation of tie point extraction, Bayesian approach was applied by introducing several prior constraints. As epipolar transformation perspective transformation was used based on condition of collinearity to minimize distortion of result images and modification for input images. Other algorithms were compared to evaluate performance. For geometry estimation, traditional relative orientation algorithm, 8-points algorithm and stereo calibration algorithm were employed. For epipolar transformation, Hartley algorithm and Bouguet algorithm were employed. The evaluation results showed that the proposed algorithm produced results with high accuracy, robustness about error sources and minimum image modification.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.179-186
• /
• 2015

In the indoor location estimation system, which has recently been actively studied, the received signal strength indicator contains a high level of noise when measuring the signal strength in the range between two nodes consisting of a receiver and a transceiver. To minimize the noise level, this paper proposes an improved adaptive smoothing filter that provides different exponential weights to the current value and previous averaged one of the data that were obtained from the nodes, because the characteristic signal attenuation of the received signal strength indicator generally has a log distribution. The proposed method can effectively decrease the noise level by using a feedback filter that can provide different weights according to the noise level of the obtained data and thus increase the accuracy in the distance and location without an additional filter such as the link quality indicator, which can verify the communication quality state to decrease the range errors in the indoor location recognition using ZigBee based on IEEE 802.15.4. For verifying the performance of the proposed improved adaptive smoothing filter, actual experiments are conducted in three indoor locations of different spatial sections. From the experimental results, it is verified that the proposed technique is superior to other techniques in range measurement.

• Journal of Chest Surgery
• /
• v.11 no.2
• /
• pp.129-134
• /
• 1978

Two hundred and seventeen patients underwent diagnostic rigid bronchoscopy or bionchofiberscopy to evaluate the cytologic diagnosis in the lung cancer patient at the department of chest surgery of Yon-Sei university, college of the medicine from 1971 to 1977 year. One hundred and twenty cases of these patients were taken rigid bronchoscopy and ninety four cases of these patient were taken bronchofiberscopy. Cytologic examination of the sputum was done in 214 cases and sputum cytology was positive in 50 cases [23.4%]. Rigid bronchoscopy was made in 120 cases and this bronchoscopic cytology including bronchial washing and bronchial biopsy was positive in 34 cases [28.5%]. Bronchofiberscopy was performed in 94 cases and was positive in 45 cases [47.5%]. Histopathologically, 41 cases [43.6%] were epidermoid cell carcinoma, 8 cases [8.5%]of undifferentiated cell type, 12 cases [12.8%]of adenocarcinoma, 8 cases [8.5%]of alveolar cell type, and the 25 cases were undetermined. Cytologic examination of the sputum lacks the accuracy of the bronchoscopies in terms of both localization and accurate histologic indentification of the type of neoplasm. Rigid bronchoscope has the advantage of permitting identification of a tumor in a central location and of providing a sufficient amount of biopsy material for accurate diagnosis of carcinoma. However, it has the disadvantage of limiting examination to the larger, more central portions of the tracheobronchial tree. Bronchofiberscope had the advantage of examine upper lobe as well as other portions of the tracheobronchial tree which could not be visualized with the rigid bronchoscopy. A positive diagnosis in bronchofiberscopy was obtained in the highest rate, 47. 8% [45 cases]. A1 last, if a bronchogenic carcinoma is suspected on the basis of either symptoms of an abnormality on the chest film the diagnostic work-up-sputum cytology, bronchial washing, bronchoscopic biopsy, scalene node biopsy, thoracentesis and mediastinoscopy explothoracotomy etc-should precede in an attempt not only to obtain the higher positive diagnosis but also to obtain a tissue diagnosis and to evaluate the stage of the disease and to ascertain the appropriate mode of therapy.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.643-648
• /
• 2017

Among Wi-Fi based indoor positioning systems, fingerprinting localization is the most common technique with high precision. However, construction of the initial radio map and the update process require considerable labor and time effort. To address this problem, we propose an efficient method that constructs the initial radio map at each vertex based on a graph. In addition, we introduce a method to update the radio map automatically by mapping signal data acquired from users to the reference point created on each edge. Since the proposed method collects signal data manually only at the vertex of the graph to build the initial radio map and updates it automatically, our proposed method can dramatically reduce labor and time effort, which are the disadvantages of the conventional fingerprinting method. In our experimental study, we show validity of our radio map update method by comparing with the actual reference point data. We also show that our proposed method is able to construct the radio map with an accuracy of about 3.5m by automatically updating the radio map.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.31-36
• /
• 2001

Passive sonar system forms the various beams in any desired directions to obtain the improvement in Signal-to-Noise (S/N) ratio, bearing detection and localization of targets, and the attenuation of interferences from other directions. The improvement of beamforming is very important to detect modern underwater targets as noise reduction technology leads to considerably low-level acoustic emissions in the long range in complex environmental sea. In this paper, we proposed the spatial cross correlation beamforming (SCCBF) algorithm using cross correlation matrix of individual hydrophone pairs of linear array sensors. By the theoretical analysis and simulation, the proposed SCCBF is demonstrated that its performances compared to conventional beamforming (CBF) output can be obtain above 3dB of array gain and about half of beam width represented the bearing accuracy in target detection. Also, this paper presents sea test result of linear passive sonar system that the proposed algorithm implemented.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.369-376
• /
• 2017

Recently, an RSSI-based fingerprinting localization technology has been widely used in indoor location-based services. In the conventional fingerprinting method, as many APs as possible are used to increase the accuracy of location estimation. In another study, a part of APs having the strongest RSSI signal intensity are selected and used to reduce the time spent for positioning. However, it does not reflect the influence of RSSI occurred from the changes of the surrounding environments such as human movement or moving obstacles in a real environment. The environmental changes may cause the difference between the predicted RSSI signal strength value and the measured value, and thus occur an unpredictable error in the position estimation. Therefore, in order to mitigate the error caused by environmental factors, it is necessary to select APs suitable for indoor positioning estimation considering the changes in the surrounding environments. In this paper, we propose a method to select stable APs considering the influence of surrounding environments and derive a suitable positioning algorithm. In addition, we compare and analyze the performance of the proposed method with that of the existing AP selection methods through experiments.

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.975-991
• /
• 2014

The objective of this study is to develop a reliable method for locating cracks in a beam using data fusion of fractal dimension features of operating deflection shapes. The Katz's fractal dimension curve of an operating deflection shape is used as a basic feature of damage. Like most available damage features, the Katz's fractal dimension curve has a notable limitation in characterizing damage: it is unresponsive to damage near the nodes of structural deformation responses, e.g., operating deflection shapes. To address this limitation, data fusion of Katz's fractal dimension curves of various operating deflection shapes is used to create a sophisticated fractal damage feature, the 'overall Katz's fractal dimension curve'. This overall Katz's fractal dimension curve has the distinctive capability of overcoming the nodal effect of operating deflection shapes so that it maximizes responsiveness to damage and reliability of damage localization. The method is applied to the detection of damage in numerical and experimental cases of cantilever beams with single/multiple cracks, with high-resolution operating deflection shapes acquired by a scanning laser vibrometer. Results show that the overall Katz's fractal dimension curve can locate single/multiple cracks in beams with significantly improved accuracy and reliability in comparison to the existing method. Data fusion of fractal dimension features of operating deflection shapes provides a viable strategy for identifying damage in beam-type structures, with robustness against node effects.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.5-12
• /
• 2010

A novel algorithm which computes the orientations and the locations of mobile robots with repeating feature of ceiling textures is proposed. For orientation computation, the relative angle between a strait line on a ceiling image and the center line of the robot is firstly computed. The relative angle is added to the global reference angles of straight lines of the ceiling and a group of robot orientation candidates is composed. The robot orientation is determined from such orientation candidate group by choosing the closest one to the previous robot orientation. Similarly, the location of the robot is determined from the robot location candidate group by choosing the closest one to the previous robot location, where robot location candidate group is composed by adding the relative location of the robot to global locations of neighboring nodes of the previous robot locations. The experiment has been done to test the accuracy of the algorithm in computing locations and orientations.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.1-11
• /
• 2008

In this paper, we propose the new eye detection method by using adaboost (adaptive boosting) method. Also, to reduce the false alarm rate which identifies the non-eye region as genuine eye that is the Problems of previous method using conventional adaboost, we proposed the post processing methods which used the cornea specular reflection and determined the optimized ratio of eye detecting box. Based on detected eye region by using adaboost, we performed the double circular edge detector for localizing a pupil and an iris region at the same time. Experimental results showed that the accuracy of eye detection was about 98% and the processing time was less than 1 second in mobile device.