• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.319-326
• /
• 2007

Coastal marine ecosystems continue to suffer unrelenting pressures from human population growth, increased development, and climate change. Moreover, these systems' capacity for self-repair is declining with such increases in anthropogenic production of various pollutants. What is the present health status or condition of the coastal ecosystem? If our coastal areas are unhealthy, which conditions are considered serious? To answer such questions, the United States, Canada, and Australia are currently assessing coastal ecosystem health using systematic monitoring programs as well as identifying and implementing management plans to improve the health of degraded coastal ecosystems. To evaluate marine environments, Korea is currently using a limited number of factors to estimate water quality. In fact, we are ill-prepared for assessing coastal ecosystem health because no biologically specific criteria are in place to measure the responses to various pollutants. We should select ecosystem-specific indicators from physicochemical stressors and evaluate the subsequent biological responses within each ecosystem. Furthermore, a set of practical indicators should be generated by considering the characteristics and uses of a local coastal area and the key issues at hand. The values of indicators should be presented as indices that allow understanding by the general public as well as by practitioners, policy makers, environmental managers and other stakeholders.

• Journal of Communications and Networks
• /
• v.6 no.1
• /
• pp.60-67
• /
• 2004

With the fast growth of Internet and a new widespread interest in optical networks, the unparalleled potential of Multi-Protocol Label Switching (MPLS) is leading to further research and development efforts. One of those areas of research is Path Protection Mechanism. It is widely accepted that layer three protection and recovery mechanisms are too slow for today’s reliability requirements. Failure recovery latencies ranging from several seconds to minutes, for layer three routing protocols, have been widely reported. For this reason, a recovery mechanism at the MPLS layer capable of recovering from failed paths in 10’s of milliseconds has been sought. In light of this, several MPLS based protection mechanisms have been proposed, such as end-to-end path protection and local repair mechanism. Those mechanisms are designed for intra-domain recoveries and little or no attention has been given to the case of non-homogenous independent inter-domains. This paper presents a novel solution for the setup and maintenance of independent protection mechanisms within individual domains and merged at the domain boundaries. This innovative solution offers significant advantages including fast recovery across multiple nonhomogeneous domains and high scalability. Detailed setup and operation procedures are described. Finally, simulation results using OPNET are presented showing recovery times of a few milliseconds.

• Industrial Engineering and Management Systems
• /
• v.9 no.2
• /
• pp.70-79
• /
• 2010

Makespan and cost minimization are two important factors in project investment. This paper considers a multi-mode resource-constrained project scheduling problem with the objective of minimizing costs, subject to a deadline constraint. A number of studies have focused on minimizing makespan or resource availability cost with a specified deadline. This problem assumes a fixed cost for the availability of each renewable resource per period, and the project cost to be minimized is the sum of the variable cost associated with the execution mode of each activity. The presented memetic algorithm (MA) consists of three features: (1) a truncated branch and bound heuristic that serves as effective preprocessing in forming the initial population; (2) a strategy that maintains two populations, which respectively store deadline-feasible and infeasible solutions, enabling the MA to explore quality solutions in a broader resource-feasible space; (3) a repair-and-improvement local search scheme that refines each offspring and updates the two populations. The MA is tested via ProGen generated instances with problem sizes of 18, 20, and 30. The experimental results indicate that the MA performs exceptionally well in both effectiveness and efficiency using the optimal solutions or the current best solutions for the comparison standard.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.17-40
• /
• 2000

Cytotoxicity assays using artificial skins have been proposed as in vitro alternatives to minimize animal ocular and dermal irritation testing. Accordingly, the responses of artificial skins to the well-characterized chemical irritants toluene, glutaraldehyde, and sodium lauryl sulfate (SLS), and the nonirritant polyethylene glycol were studied. The evaluation of the irritating and non-irritating test chemicals was also compared with the responses observed in human dermal fibroblasts and human epidermal keratinocytes grown in a monolayer culture. The responses monitored included an MTT mitochondrial functionality assay. In order to better understand the local mechanisms involved in skin damage and repair, the production of several mitogenic proinflammatory mediators, interleukin-l$\alpha$, 12-HETE, and 15-HETE, was also investigated. Dose-dependent increases in the levels of かIn and the HETEs were observed in the underlying medium of the skin systems exposed to the two skin irritants, glutaraldehyde and SLS. The results of the present study show that both human artificial skins can be used as efficient in vitro testing models for the evaluation of skin toxicity and for screening contact skin irritancy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.59-69
• /
• 2021

Directed energy deposition (DED) is an additive manufacturing technology involving a focused high-power laser or electron beam propagating over the substrate, resulting in melt pool formation while simultaneously supplying metal powder to the melt pool area to deposit the material. DED is performed to repair and strengthen parts in various applications, as it can be easily integrate local area cladding and cross-material deposition. In this study, we characterize stainless steel 316 L parts fabricated via DED based on various deposition conditions and geometries to widen the application of DED. The deposition characteristics are investigated by varying the laser power and powder feed rate. Multilayer deposition with a laser power of 362 W and a powder feed rate of 6.61 g/min indicate a height closest to the design value while affording high surface quality. The microhardness of the specimen increases from the top to the bottom of the deposited area. Tensile tests of specimens with two different deposition directions indicate that horizontally long specimens with respect to a substrate demonstrate a higher ultimate tensile strength and yield strength than vertically long specimens with lower elongation.

• Journal of Medicine and Life Science
• /
• v.15 no.2
• /
• pp.56-61
• /
• 2018

Advances in medical technology has enabled better management of complicated and chronic wounds. Negative-pressure wound therapy (NPWT) is a novel dressing technique that uses negative pressure to drain exudates and blood from wounds. NPWT increases local blood flow and promotes reduction of edema and wound healing and is suitable for a variety of wounds. It is associated with few adverse effects and shows excellent efficacy and cost-effectiveness. NPWT promotes rapid growth of granulation tissue and wound contraction; thus, it is more advantageous than general dressings as it reduces the size skin of grafts or flaps required for repair, and patients with chronic wounds can be treated as outpatients. We investigated the general usage and mechanism of NPWT, its clinical applications and adverse effects.

• Journal of Trauma and Injury
• /
• v.32 no.3
• /
• pp.168-171
• /
• 2019

The treatment outcome remains poor of severe facial injuries because of the high risk of compromised airway or massive bleeding. We experienced two successful treatment cases of severe facial injury by the chainsaw. A 52-year-male had his face injured by the chainsaw during his work. He was transferred to the Level I trauma center using the Doctor-Helicopter. During his flight, bleeding control was tried and the information was given to the trauma surgeons before his arrival. His consciousness was alert and the vital signs were stable. The crushing wound, mandible open fracture, deep laceration of tongue, lip, neck and arterial bleeding were noted around his mandible. Nasotracheal intubation was performed under the bronchoscope-guided. Emergency operation (open reduction & internal fixation, primary repair with neurorrhaphy) was performed. At 30 hospital days, he was discharged with facial palsy on left mandibular area. A 30-year-male had his face injured by the chainsaw. He was transferred to our Level I trauma center from the local hospital. The deep-mutiple lacerations on right upper eyelid and forehead with the bony exposure were noted. The vital signs were stable and emergency operation was performed. He was discharged at 20 hospital days. Bone loss or tissue loss were not devastating than we expected even though the injury was occurred by the chainsaw. Aggressive treatment including airway manipulation or bleeding control and maximal opportunity of therapy are absolutely needed.

• Archives of Craniofacial Surgery
• /
• v.22 no.3
• /
• pp.164-167
• /
• 2021

Reconstruction of lip defects is important because the lips play an important role in maintaining aesthetic facial balance, facial expressions, and speech. There are various methods of lip reconstruction such as primary repair, skin grafting, and utilization of local and free flaps. It is important to select a proper reconstruction method according to the size and location of lip defect. Failure to select an appropriate method may result in distortion, color mismatch, sensory loss, and aesthetic imbalance. Herein we present a case of successful aesthetic reconstruction of the lower vermilion. We removed a venous malformation, which was limited to the lower vermilion and adjacent to the white roll, and repaired the defect using the modified O-Z flap.

• Journal of Trauma and Injury
• /
• v.35 no.1
• /
• pp.61-65
• /
• 2022

Traumatic abdominal wall hernia is a very rare clinical entity. Herein, we report the case of a patient who was transferred from a local clinic to the emergency department because of left lower abdominal pain. Initially, an intra-abdominal hematoma was observed on computed tomography and no extravasation was noted. Conservative treatment was initiated, and the patient's symptoms were slightly relieved. However, though abdominal pain was relieved during the hospital stay, bowel herniation was suspected in the left periumbilical area. Follow-up computed tomography showed traumatic abdominal wall hernia with hemoperitoneum in the abdomen. We performed a laparoscopic exploration of the injury site and hernia lesion. The anterior abdominal wall hernia was successfully closed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.194-200
• /
• 2022

As of 2020, the cumulative number of electric vehicles worldwide increased 43% from 2019, exceeding 10 million. We surveyed and analyzed important factors when purchasing electric vehicles for consumers who own electric vehicles. Through this, we tried to find an effective way to supply electric vehicles in the future. The purpose of this study is to present customized marketing proposals for companies by empirically analyzing the factors affecting consumers' electric vehicle purchases and deriving market demands for electric vehicles. We identified the market status of electric vehicles through literature research and reviewed previous studies on the factors affecting the purchase intention of electric vehicles. Through empirical studies, differences in electric vehicle purchase factors according to gender, age, and the degree of importance of performance were analyzed. To this end, the SPSS statistics package was used. Factors influencing the purchase of electric vehicles were set to mileage, charging time, new technology, degree of driving autonomous development, design, price, infrastructure for charging, the phase of maintenance and repair, by the government and local governments. In addition, the most important factors were derived, and the average difference analysis was conducted according to gender, age, and performance importance.