• 한국해양공학회지
• /
• 제28권5호
• /
• pp.423-428
• /
• 2014

Ice loads may be conveniently categorized as local ice loads and global ice loads. Local ice loads are often defined as ice pressures acting on local areas of shell plates and stiffeners. Therefore, local ice loads are defined in all ice class rules. However, directly measuring the local ice pressure using the actual ice class vessel is a very difficult task because appropriate instruments for direct measurement must be installed on the outer hull, and they are easily damaged by direct ice contacts/impacts. This paper focuses on the estimation of the local ice pressure using the data obtained from icebreaking tests in the Arctic sea in 2010 using the Korean icebreaking research vessel (IBRV) ARAON. When she contacted the sea ice, the local deformation of the side shell was measured by the strain gauges attached to the inside of the shell. Simultaneously, the contact area between the side shell and sea ice is investigated by analyzing the distribution of the measured strain data. Finally, the ice pressures for different contact areas are estimated by performing a structural analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1902-1907
• /
• 2008

The current work presents a design and fabrication technique for a microchannel system to measure the local temperature distribution inside microchannel. This micro channel system fabricated by MEMS technique is integrated with a heater and an array of temperature sensors so that detailed heat transfer phenomena inside micro-scale channel can be studied. Materials widely used in semiconductor process were selected to fabricate a heater and temperature sensors on a silicon wafer. On these heater and sensors a channel wall was fabricated with SU-8. The friction constant and the local Nusselt number distribution measured for the deionized water flow in the microchannel is presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.257-261
• /
• 2011

The failures of local structure of marine medium-speed diesel engine occurred in durability test. The vibration response of the whole engine was in an acceptance level, but the local structures were broken. ODS test and vibration measurement were carried out in order to investigate the root cause of durability problem. These tests revealed that the root cause of failures was excessive vibration by $4.5^{th}$ resonance between engine body and local structure. The best solution to reduce the vibration response is to change the type of mount. After a rigid mount was replaced by a flexible mount, maximum vibration level dropped to 72%.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.3-8
• /
• 1996

Fatigue fracture is the cyclic fracture phenomena at a very small local area near a crack tip. Therefore, the detailed quantitative experimental analysis about local cyclic strain distribution near a crack tip is prerequisite In order to make an effective parameter able to account for fatigue fracture problems. However, there are few reports on detailed quantitative experimental analysis of a local cyclic strain distribution near a crack tip, because of experimental difficulties. In this study, the distribution of local fatigue strains near a fatigue crack tip was in detail studied using by fine dot grid strain measurement method. From these results, a single parameter, which characterizes local fatigue strain field, was proposed. In addition, this parameter was applied to evaluate the fatigue crack propagation rate.

• 국제지역연구
• /
• 제17권4호
• /
• pp.133-153
• /
• 2013

본 연구는 개천예술제의 경제적 가치를 추정하였다. 추정방법은 Pearse(1972)가 제안한 여행비용차이추정법(TCM)을 새로운 가중치를 도입한 개선된 여행비용차이추정법을 활용하였다. 본 연구의 목적을 달성하기 위한 설문조사는 제63회 개천예술제 방문객 497명을 대상으로 하였다. 축제 방문객의 지출비용을 토대로 축제의 가치를 추정한 결과, 개천예술제의 총 가치는 약 2,270억 5,700여만 원으로 평가되었다. 분석결과, 개천예술제의 경제적 가치에 영향을 미치는 여행비용 항목은 교통비, 식 음료비, 쇼핑비, 숙박비, 유흥비, 입장료 순으로 나타났다. 외부 방문객비율이 높아 교통비(41%)항목이 가장 큰 영향을 미친 것으로 분석되었으나, 숙박비나 입장료로 인한 방문객잉여에 의한 영향은 미미하게 나타났다. 숙박비나 쇼핑비, 유흥비 및 입장료는 지역경제에 직접적인 영향을 미치므로 축제를 기획하는 주최측은 숙박관광을 유도하기 위한 유익하고 의미 있는 연계프로그램의 개발과 지역특산물을 이용한 다양한 쇼핑상품의 개발이 필요하다. 본 연구에서 제시한 개선된 여행비용차이추정법을 이용하여 각 지역축제의 경제적 가치를 측정한다면 다소간 축제의 성격에 차이가 있더라도 보다 객관적이고 명확한 축제간의 비교가 가능하여 지역축제의 발전과 지역경제활성화에 기여할 수 있을 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1318-1321
• /
• 1997

A method for two-dimensional position measurement using an enclosing field has been studied and reported. The feature of this mehtod is zooming functional measurement by operating both the initial phase shift and the brightness ratio of the lighting function. An experimental system was developed and the experimental results on zooming effects are shown in this paper. This system is also an example of a "progressive learning measurement system".tem".uot;.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.243-246
• /
• 2009

하이브리드 로켓의 고체 연료에서 축방향 국부 후퇴율은 하이브리드 추진 연소기의 설계 변수 및 성능 변수로 활용 된다. 국부 후퇴율 측정하기 위한 방법으로는 여러 가지 있지만, 침수법은 간단한 방법으로 연료의 형상 및 물리적 특성에 관계 없이 정확하게 축방향 국부 후퇴율을 측정할 수 있다. 본 연구에서는 기존의 국부 후퇴율 측정장비의 문제점을 개선하였고, 실험을 통해 높은 정확성을 가짐을 확인 하였다.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.445-458
• /
• 2001

The shape and the distribution of material construction of the scatterer may be obtained from its scattered fields by the iterative inversion in the spectral domain. The illposedness, the resolution, and the uniqueness of the inversion are the key problems in the inversion and inter-related. The illposedness is shown to be caused by the evanescent modes which carries and amplifies exponentially the measurement errors in the back-propagation of the measured scattered fields. By filtering out all the evanescent modes in the cost functional defined as the squared difference between the measured and the calculated spatial spectrum of the scattered fields from the iteratively chosen medium parameters of the scatterer, one may regularize the illposedness of the inversion in the expense of the resolution. There exist many local minima of the cost functional for the inversion of the large and the high-contrast scatterer and the hybrid algorithm combining the genetic algorithm and the Levenberg-Marquardt algorithm is shown to find efficiently its global minimum. The resolution of reconstruction obtained by keeping all the propating modes and filtering out the evanescent modes for the regularization becomes 0.5 wavelength. The super resolution may be obtained by keeping the evanescent modes when the measurement error and instance, respectively, are small and near.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1451-1469
• /
• 2019

This paper proposes a residual stress mitigation of a nuclear safety-related austenitic stainless steel TP304 pipe bended by local induction heating process via performing elastic-plastic finite element analysis. Residual stress distributions of the pipe bend were calculated by performing finite element analysis. Validity of the finite element analysis procedure was verified via comparing with temperature histories measured by using thermocouples, ultrasonic thickness measurement results, and residual stress measurement results by a hole-drilling method. Parametric finite element stress analysis was performed to investigate effects of the process and geometric shape variables on the residual stresses on inner surfaces of the pipe by applying the verified procedure. As a result of the parametric analysis, it was found that it is difficult to considerably reduce the inner surface residual stresses by changing the existing process and geometric shape variables. So, in order to mitigate the residual stresses, effect of an additional process such as cooling after the bending on the residual stresses was investigated. Finally, it was identified that the additional heating after the bending can significantly reduce the residual stresses while other variables have insignificant effect.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.746-754
• /
• 2008

This paper proposes a method to detect calibration patterns for accurate camera calibration under complicated backgrounds and uneven lighting conditions of industrial fields. Required to measure object dimensions, the preprocessing of camera calibration must be able to extract calibration points from a calibration pattern. However, industrial fields for visual inspection rarely provide the proper lighting conditions for camera calibration of a measurement system. In this paper, a probabilistic criterion is proposed to detect a local set of calibration points, which would guide the extraction of other calibration points in a cluttered background under irregular lighting conditions. If only a local part of the calibration pattern can be seen, input data can be extracted for camera calibration. In an experiment using real images, we verified that the method can be applied to camera calibration for poor quality images obtained under uneven illumination and cluttered background.