• Journal of the Korea Furniture Society
• /
• v.27 no.3
• /
• pp.246-252
• /
• 2016

From 2000s, modular construction has gained more attention due to many advantages such as reduction of duration, recycling. The modular structure is being used for urban regeneration recently. However, even though most facilities in the modular structures which are used as urban regeneration building are commercial spaces, exhibition spaces, eating and drinking spaces, there are lack of natural or mechanical ventilation systems. Also, there are relatively limited spaces on modular structure characteristic. Therefore, indoor environment performance of four buildings, which are performed as urban regeneration in Seoul, was evaluated by HCHO and $CO_2$ emissions. Consequently, the HCHO and $CO_2$ emissions of the commercial and exhibition spaces were confirmed that can influence on health of occupants. Therefore, the urban regeneration modular structure needs to add local ventilation systems for improvement of indoor air quality to more healthy and comfortable.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.63-71
• /
• 2008

Local meteorological conditions exert a strong influence over day-to-day variations in air pollutant concentrations. Therefore, the meteorological fluctuations have to be removed in order for air quality planners and managers to examine underlying emissions-related trends and make better air quality management decisions for future. In this study, the meteorologically adjusted $PM_{10}$ trends in Seoul are investigated over the period $1999{\sim}2006$ using Kolmogorov-Zurbenco (KZ) filter. The result indicated that meteorologicaJ variability accounts for about 25% of $PM_{10}$ variability. Both the meteorologically adjusted and unadjusted Jong-term daily $PM_{10}$ concentrations had a significant downward trends and the difference between the meteorologically adjusted and unadjusted was small. So it was assumed that in long-term daily $PM_{10}$ changes, localized changes in emissions is more important than the changes caused by meteorological conditions.

• International Journal of Automotive Technology
• /
• v.6 no.5
• /
• pp.445-451
• /
• 2005

Most of the pollutants from passenger cars are emitted during the cold-transient phase of the FTP-75 test. In order to reduce the exhaust emissions during the cold-transient period, it is essential to warm up the catalyst as fast as possible after the engine starts, and the Unburned Exhaust Gas Ignition (UEGI) technology was developed through our previous studies to help close-coupled catalytic converters (CCC) reach the light-off temperature within a few seconds after cold-start. The UEGI system operates by igniting the unburned exhaust mixture by glow plugs installed upstream of the catalyst. The flame generates a high amount of heat, and if the heat is concentrated on a specific area of monolith surface, then thermal crack or failure of the monolith could occur. Therefore, it is very important to monitor the temperature distribution in the CCC during the UEGI operation, so the local temperatures in the monolith were measured using thermocouples. Experimental results showed that the temperature of CCC rises faster with the UEGI technology, and the CCC reaches the light-off temperature earlier than the baseline case. Under the conditions tested, the light-off time of the baseline case was 62 seconds, compared with 33 seconds for the UEGI case. The peak temperature is well under the thermal melting condition, and temperature distribution is not so severe as to consider thermal stress. It is noted that the UEGI technology is an effective method to warm up the catalyst with a small amount of thermal stress during the cold start period.

• Steel and Composite Structures
• /
• v.50 no.4
• /
• pp.443-458
• /
• 2024

The construction industry, one of the biggest producers of greenhouse emissions, is under a lot of pressure as a result of growing worries about how climate change may affect local communities. Geopolymer concrete (GPC) has emerged as a feasible choice for construction materials as a result of the environmental issues connected to the manufacture of cement. The findings of this study contribute to the development of machine learning methods for estimating the properties of eco-friendly concrete, which might be used in lieu of traditional concrete to reduce CO₂ emissions in the building industry. In the present work, the compressive strength (f_c) of GPC is calculated using random forests regression (RFR) methodology where natural zeolite (NZ) and silica fume (SF) replace ground granulated blast-furnace slag (GGBFS). From the literature, a thorough set of experimental experiments on GPC samples were compiled, totaling 254 data rows. The considered RFR integrated with artificial hummingbird optimization (AHA), black widow optimization algorithm (BWOA), and chimp optimization algorithm (ChOA), abbreviated as ARFR, BRFR, and CRFR. The outcomes obtained for RFR models demonstrated satisfactory performance across all evaluation metrics in the prediction procedure. For R² metric, the CRFR model gained 0.9988 and 0.9981 in the train and test data set higher than those for BRFR (0.9982 and 0.9969), followed by ARFR (0.9971 and 0.9956). Some other error and distribution metrics depicted a roughly 50% improvement for CRFR respect to ARFR.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.1
• /
• pp.33-44
• /
• 2003

The atmospheric concentrations of particulate polycyclic aromatic hydrocarbons (PAHs) associated with PM$_{10}$ were determined in Taegu metropolitan area. Sampling was undertaken every five days throughout one year period from 1993 to 1994 at four sites, representing a residential, a commercial, an industrial, and a sub-urban area, respectively. Benzo (e) pyrene, benzo (k) fluoranthene, and chrysene were found to be the most abundant com-pounds during the study period. The concentrations of benzo (a) pyrene, one of carcinogenic PAHs, ranged 2.0~4.8 ng/㎥ in winter and 0.5~1.5 ng/㎥ in summer season, indicating a marked seasonal variation. It was found that there were very similar patterns in the relative profiles of PM$_{10}$-bound PAH concentrations among the four sampling sites, while the absolute levels of each PAH were significantly different from each site. In addition, the patterns of summer to winter concentration ratios for each PAH were almost identical between the different sites. Despite difficulties due to the lack of good markers for specific sources in the target compounds, we were able to evaluate and describe the effects of vehicle emissions and space heatings, using relative profiles of PAHs, winter to summer (W/S) ratios, PAH-to-PAH ratios, and the result of principal component analysis. As a con-sequence, it was concluded that the vehicle emissions in urban and sub -urban areas are likely to be a major contributor for PAH loadings in the ambient atmosphere during the non-heating season, while the contributions of residential heating and local industrial oil burning emissions were highly significant in heating season.son.

• Journal of Environmental Impact Assessment
• /
• v.16 no.1
• /
• pp.1-13
• /
• 2007

This study was carried out to estimate the emission reduction rates for the regional allowable emissions by special measures to achieve the target air quality in Seoul Metropolitan Area (SMA). A modeling system was designed to validate the details in enforcement regulations set up by local governments based on the current status and plans for air quality improvement. Modeling system was composed of meteorological model (MM5), emission model (SMOKE), and air quality model (CMAQ). Predicted results by this system show quiet well not only daily air pollutants concentration but also the tendencies of wind direction, wind speed and temperature. To achieve the target air quality in Seoul Metropolitan Area (SMA), emission allowances are estimated by seasons and regions. Referring to the base year 2002, it was estimated that emission reduction rates to achieve the intermediate goal in 2007 were 14.2% and 16.6% for NOx and $PM_{10}$, respectively. It was also estimated that 52% of NOx and 48% of $PM_{10}$ reductions from the base year 2002 would be required to accomplish the air quality improvement goal of 22 ppb for $NO_2$, and $40mg/m^3$ for $PM_{10}$ in year 2014. To improve $NO_2$ and $PM_{10}$ concentration through emissions reduction policies, it was found that emissions reduction for the on-road mobile sources would be the most effective in SMA.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.6
• /
• pp.634-639
• /
• 2012

The contribution levels of emissions from the heavy-duty vehicles have been continuously increased. Among the exhaust emissions, NOx (nitric oxides) have a ratio of 73.2% and particle matters have a proportion of 61.8% in the heavy-duty vehicles. Also, natural gas vehicles have the 78.9% of total registered local buses in Korea. Therefore, the investigation on emission characteristics of heavy-duty vehicles using CNG and diesel fuel according to the various driving cycles was carried out in this study. In order to analyze the emission characteristics, the five kinds of buses by using CNG and diesel fuels with a after-treatment devices (DPF, p-DPF) was used and five test driving schedules were applied for analysis of emission characteristics in a chassis dynamometer. To analyze the exhaust emission, the exhaust emission and PM analyzers were used. From this study, it is revealed that diesel buses with after-treatment had reduced emission of CO, HC, PM but NOx. Also, NMHC emission of CNG bus have a higher level and NOx level was similar with diesel buses. In addition, emissions in NIER06 with slow average speed shows lowest levels compared to other test modes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.37-47
• /
• 2002

Recently gasoline direct injection method has been applied to gasoline engine to reduce fuel consumption rate by controlling fuel air mixture on lean condition by means of stratified charging, and to reduce simultaneously. Pollutant emissions especially NOx and CO by lowering the combustion temperature. But difficulty of controling local fuel air ratio at ignition area in flammability limit unavoidably appeared, because it is merely controlled by injection timing with spatial and temporal distribution of fuel mixture. In this study, the authors devised a uniquely shaped combustion chamber so called three-chamber GDI engine, intended to keep the more reliable fuel air ratio at ignition area. The combustion chamber is divided into three regions. The first region is in the rich combustion division, where the fuel is injected from the fuel injection valve and ignited by the spark plug. The second region is in the lean combustion division, where the combustion gas from the rich combustion division flows out and burns on lean condition. And the last region is in the main combustion division ie in the cylinder, where the gas from the above two combustion divisions mixed together and completes the combustion during expansion stroke. They found that the stable range of operation of three-chamber GDI engine on low-load condition exists in the lean area of average equivalence ratio. And they also found that the reformed engine reveals less specific fuel consumption and less pollutant emissions compared with conventional carburettor type gasoline engine.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.11-18
• /
• 2011

Urban space is the main contributor of greenhouse gas emissions, a primary cause of global warming. In order to reduce greenhouse gas emissions, planning at a city-level is necessary. The aim of this research is to develop a carbon emission model which can be used to create and manage urban spaces. In order to achieve this aim, the following methodologies were utilized. First, urban planning criteria related to population, landuse, and activity level were selected through theoretical speculation. Second, carbon dioxide emission was calculated based on electricity, gas energy, heating, petroleum, and water usages. Third, Seoul was selected as a case study city, and a carbon emission model was developed through a relational analysis between Seoul's urban planning criteria and carbon emissions. Thus far, various efforts have been made to respond to climate changes in urban spaces, but these have been limited to analyzing contributing factors in terms of their total amounts of carbon emissions in the entire city. However, the carbon emission model of this study is derived from urban planing criteria at a detailed scale. This sets our study apart from other studies by demonstrating a specific model in a local setting which can be utilized for lowering carbon emissions at a city level.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2015

As the interest on the air pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward various main issues : whether PM emissions should be regulated for diesel and gasoline vehicles and whether gasoline and LPG powered vehicles can be further neglected from PM emission inventories. Finally, the greenhouse gas regulation has been discussed including automotive emission regulation. The greenhouse gas and emissions of automotive had many problem that cause of ambient pollution, health effects. Based on various test modes and ambient conditions, this paper discusses the characteristics of LPG on exhaust emissions and greenhouse gases. Also, this paper assessed emission characteristics due to the test temperature. These test temperature were performed by dividing the temperature of the test mode and the lowest local temperature in winter. Through this study, the correlation of vehicle test mode and ambient condition, exhaust emission, greenhouse gas emission was analyzed.