• 한국환경생태학회지
• /
• 제36권6호
• /
• pp.639-650
• /
• 2022

미선나무(Abeliophyllum distichum Nakai)는 오직 한반도 일부 지역에 제한적으로 자생하는 특산식물이며, 지구범위 인 IUCN Red List Endangered로 평가·등재되어 있는 이화주성(distyly, 二花柱性) 특성을 가진 희귀식물이다. 본 연구는 미선나무 자생 개체군 8개 지역과 천연기념물 개체군 6개 지역 등 총 14개 지역의 정량조사 결과를 바탕으로 미선나무 이화주성에 따른 개화 특성과 개체군 크기를 비교·분석함으로써 향후 미선나무 개체군에 적합한 현지 내 보전관리방안 정립을 목적으로 수행되었다. 개체군별 출현 개체는 전수조사하였으며, 각 개체의 화기 형태로 장주화·단주화 개체를 식별해 개화 개체를 현장에서 조사·기록 후 분석하였다. 미선나무 전체 출현 개체 수는 총 13,130개체(개화 7,003개체, 미성숙 6,127개체)로 각 개체군의 장주화·단주화 개화 개체 수 적정 균형 상태가 유의적(P<0.05)이지 않고, 불균형한 상태를 나타냈다. 특히, 영동 개체군은 타 개체군 대비 매우 불균형적 형태를 나타내 타 개체군과 비교했을 때 유전다양성이 낮고, 근친교배 가능성이 클 것으로 추정된다. 관리 단위별 평균 개화·결실률은 각각 자생 개체군 39.0%, 8.5%, 천연기념물 개체군 89.2%, 55.3%로 천연기념물 개체군이 자생 개체군 대비 매우 높게 나타났다. 이는 상층 수관 울폐 차이에 따른 임내 광유입 변화와 관계된 생식 생장 크기 차이로 사료된다. 한반도 내 미선나무 전체 점유면적은 23,224.5m²이었고, 천연기념물 개체군이 자생 개체군 대비 개체군 점유 면적은 작으나 밀도는 상대적으로 높게 나타났다. 일정 면적에 대한 보호시설 설치로 개체군 확산에 제약이 있는 천연기념물 개체군 내 주기적인 관리가 천연기념물 개체군 밀도를 높인 주된 요인일 것으로 추정된다. 미선나무 보전을 위해서는 현재 인위적·유전적 교란이 의심되는 천연기념물 집단을 해제하고, 새로운 보호구역을 신규로 지정함으로써 보전 우선 개체군의 확대가 필요하다. 천연기념물 개체군의 경우 문화재청과 지자체에서 자생지 관리가 이뤄지고 있으나 자생 개체군의 경우 관리 주체가 전무한 실정으로 미선나무 전반적 관리에 대한 제도적 개선이 우선적으로 이뤄져야 할 것이다.

• 한국환경생태학회지
• /
• 제34권1호
• /
• pp.9-17
• /
• 2020

섬에 유입된 고양이(Felis catus)는 외래 포식자로서 섬 고유종의 멸종이나 절멸, 생물 다양성 감소 등의 직접적인 요인으로 작용할 수 있다. 본 연구는 제주도의 부속섬인 마라도(N 33° 07', E 126° 16')에 유입되어 서식하는 고양이의 개체군 현황과 행동권, 서식지 이용특성을 파악하기 위해 실시되었다. 2018년 3월부터 2018년 7월까지 직접관찰과 포획-재포획법을 통해 개체수 추정 결과, 번식 가능한 성체 총 20마리를 확인하였다. 이 중 10마리에 GPS 무선추적장치를 부착하여 추적한 결과 고양이의 행동권 크기는 12.05±6.99 ha (95% KDE: kernel density estimation), 핵심서식지 크기는 1.60±0.77 ha (50% KDE)로 나타났다. 성별에 따른 행동권과 핵심서식지의 크기는 통계적으로 유의하지 않았고, 10마리 중 8마리가 먹이획득이 쉬운 인간 거주지역을 핵심서식지로 이용하였다. 또한 마라도에 번식하는 멸종위기종인 뿔쇠오리(Synthliboramphus wumizusume)의 번식지에 5마리, 섬개개비(Locustella pleskei)의 번식지에 6마리가 접근하는 것을 각각 확인하였다. 본 연구는 마라도의 고양이 개체수와 행동권에 대한 정보를 최초로 파악하였으며, 특히 고양이 행동권 분석을 통해 철새와 멸종위기종에 대한 가해 가능성을 제시하였다. 철새와 멸종위기 조류의 서식지인 마라도에서 발생할 수 있는 고양이의 피해를 줄이기 위해 향후 고양이의 포식압, 고양이와 멸종위기 조류 개체군의 변동에 대한 모니터링에 관한 연구와 함께, 필요시 고양이 개체군 관리방안을 마련할 필요가 있을 것으로 판단된다.

• 전자공학회논문지
• /
• 제51권9호
• /
• pp.82-90
• /
• 2014

본 논문에서는 선형성을 가진 파노라믹 스캔 라이다(PSL) 시스템용의 4-채널 차동 트랜스임피던스 증폭기 어레이를 0.18-um CMOS 공정을 이용하여 구현하였다. PSL시스템을 위한 성능의 비교분석을 위하여 전류모드 및 전압모드의 두 종류 트랜스임피던스 어레이 칩을 각각 구현하였으며, 채널당 1.25-Gb/s 동작속도를 갖도록 설계하였다. 먼저 전류모드 칩의 경우, 각 채널 광 수신입력단은 전류미러 구조로 구현하였으며, 특히 로컬 피드백 입력구조로 개선하여 낮은 입력저항과 낮은 잡음지수를 가질 수 있도록 설계하였다. 칩 측정 결과, 채널 당 $69-dB{\Omega}$ 트랜스임피던스 이득, 2.2-GHz 대역폭, 21.5-pA/sqrt(Hz) 평균 잡음 전류 스펙트럼 밀도, -20.5-dBm 수신감도, 및 1.8-V 전원전압에서 4채널 총 147.6-mW 소모전력을 보이며, 1.25-Gb/s 동작속도에서 크고 깨끗한 eye-diagram을 보인다. 한편, 전압모드 칩의 경우, 각 채널 광 수신입력단은 인버터 입력구조로 구현하여 낮은 잡음지수를 갖도록 설계하였다. 칩 측정 결과, 채널 당 $73-dB{\Omega}$ 트랜스임피던스 이득, 1.1-GHz 대역폭, 13.2-pA/sqrt(Hz) 평균 잡음 전류 스펙트럼 밀도, -22.8-dBm수신감도, 및 4채널 총 138.4-mW 소모전력을 보이며, 1.25-Gb/s 동작속도에서 크고 깨끗한 eye-diagra을 보인다.

• 유기물자원화
• /
• 제26권1호
• /
• pp.5-12
• /
• 2018

최근 지자체에서는 매립지 사용에 관한 갈등과 사용종료 시점을 앞두고 논란이 이는 사례가 늘고 있으며, 대체 매립지 마련이나 기존 매립지의 수명연장 합의를 이끄는데 난항을 겪고 있다. 이에 본 연구는 매립지 정비를 통하여 기 매립된 폐기물과 향후 매립될 폐기물의 순환이용 가능량을 산정하고, 매립지의 용량을 확보하도록 기여하는 데에 그 목적이 있다. 이를 위해 부피증가율, 중량비, 겉보기밀도를 주요 파라미터로 결정하고, 기존 사업 사례를 통해 그 값을 산정하였다. 기존 사업 지역(아산시, 예천군, 안동시)에서의 부피증가율의 평균값은 1.42로 산정되었다. 중량비의 경우 세 지역의 토사류 평균값은 45.6%로 산정되었고, 가연성 폐기물과 불연성 폐기물의 비율은 "전국 폐기물 발생 및 처리 현황" 통계자료를 활용할 수 있도록 산정 방법론을 제시하였다. 겉보기밀도는 두 지역 평균값을 이용하였으며 가연성, 불연성, 토사류별로 각각 0.35톤/$m^3$, 1.40톤/$m^3$, 1.58톤/$m^3$으로 산정되었다. 본 연구에서 산정된 주요 파라미터들과 제시된 방법론을 통해 사례 연구로 청주매립지의 순환이용 가능량을 분석하였다. 기 매립된 폐기물을 정비하여 순환이용함으로써 새로 확보될 매립용량은 기존 매립지 용량 대비 45%에 해당되었다. 또한 매년 반입되는 물량을 선별하여 가연성분은 에너지화하고, 소각재, 불연성 및 토사류만 재매립할 경우 청주시의 매립지 사용연한이 20년 증가되는 것으로 분석되었다. 향후 본 연구에서 구축한 방법론은 특정 매립지를 선정하여 순환이용 하고자 할 때 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국조경학회지
• /
• 제51권3호
• /
• pp.21-36
• /
• 2023

기후변화 대응, 탄소중립 전략, 도시열섬, 미세먼지, 생물다양성 증진 등 환경이슈에 대한 해결책으로 도시녹지와 수목의 가치가 중요해지고 있으며 다양한 연구들이 도시환경개선을 위한 수목의 효과를 다루고 있다. 따라서 본 연구는 도시환경개선 측면에서 식재수종, 식재구조, 식재밀도, 식재기반의 선행연구를 종합적으로 고찰하여 도시공원 조성녹지의 식재 리뉴얼 방향성을 제안하고 이를 리뉴얼 계획에 적용해 조경수목을 통한 도시환경개선 효과를 제고하는 데 목적이 있다. 서울시 내 대규모 근린공원인 서울어린이대공원의 식재현황을 현장조사하고 조사자료를 근거로 식재기능평가를 했으며 식재기능개선 필요지역을 중첩 도출하였다. 식재기능평가는 공원기능 설정, 공간기능에 따른 식재개념, 식재현황 단계별로 수행하였고, 연구의 결과인 기능변화에 따른 식재 리뉴얼 방향은 식재기능평가 단계별로 도출하였다. 공원기능 설정은 녹지율을 높이는 것이 우선이나 이용자 편의도 고려해야 하며, 식재개념으로 시각적 경관식재는 교목층은 수형이 아름답고 탄소흡수와 미세먼지 저감효과가 높은 수종을 식재, 생태적 경관식재는 경사구배 위 다층구조 식재지 조성, 완충식재는 다층구조숲으로 조성하여 탄소흡수와 미세먼지 저감 효과 향상, 녹음식재는 활엽수 교목층과 초본층으로 구성하고 초본류의 자연형 식재를 지향해야 한다. 식재수종은 도시환경개선 효과가 높은 수종, 지역 자생종, 야생조류 선호 수종을 식재하고, 식재구조는 경관식재지와 녹음식재지는 교목층과 관목층, 교목층과 초본층으로 구성하고 생태성이 강조되거나 완충기능이 필요한 식재지는 다층구조로 조성한다. 식재밀도는 식재간격 기준으로 더 높은 기준을 적용하며, 식재기반은 빗물재활용과 토양객토 및 통기시설을 사용한다. 본 연구의 결과는 향후 노후 도시공원의 식재리뉴얼 계획 시 식재기능평가를 수행하여 식재기능개선 필요지역을 도출하는 데 적용할 수 있으며, 조성녹지의 기능변화 패러다임을 다각도로 반영한 식재 리뉴얼 방향성을 제시했다는 점에서 의의가 있다.

• 농촌의학ㆍ지역보건
• /
• 제8권1호
• /
• pp.44-65
• /
• 1983

As a part of the epidemiological studies of clonorchiasis, this study was conducted to evaluate the current endemicity and the natural transition of the Clonorchis infection in Gimhae Gun and delta area a high endemic area in Korea in recent years, prior to the introduction of praziquantel which will eventually influence the status of the prevalence. The data obtained in this study in 1983 were evaluated for natural transition of the infection in comparison with those obtained 16 years ago in 1967 by the author(Kim, 1974). The areas of investigation, villages and schools surveyed, methods and techniques used in this study were the same as in 1967, except for the contents of the questionnaire for raw freshwater fish consumption by the local inhabitants. 1) The prevalence rate of clonorchiasis in the general population of the villages was 48.1% on the average out of a total of 484 persons examined. The average of those of the riverside-delta area was 65.2% and 43.0% in the inland area. Among the schoolchildren, the prevalence rate was 8.2% on the average out of a total of 1,423 examined. By area, the prevalence rate was 10.8% in the riverside delta area and 2.8% in the inland area. By sex, difference in the prevalence was seen only in the inhabitants of the inland area showing 52.4% in the male and 33.5% in the female. 2) In the natural transition of the infection, the prevalence rate among the inhabitants has decreased from 68.8% in 1967 to 48.1% in 1983, and in the schoolchildren from 56.4% in 1967 to 8.2% in 1983. The reduction rate was higher in the riverside-delta area than in the inland area. 3) In the prevalence rate by age, 11.9% was first seen in the 5-9 age group and the rate gradually increased up to 75.0% in the 50-59 age group. By sex, the rate was higher in the male than in the female in the 20-29 age group and over. 4) In the natural transition of the prevalence rate by age, the reduction rate of the infection during the past 16 years was greater in the younger age groups up to the 40-49 age group and reached the same level in the age group 50-59. Reduction was seen again in the age group over 60s. By sex, the reduction rate was greater in the female than in the male in the 20-29 age group and over. By area, the reduction rate was greater in the riverside delta area than in the inland area, particularly in the young age groups. 5) In the intensity of the infection among the cases, the mean egg out-put per mg feces per infected cases(EPmg) in the inhabitants was 6.3. EPmg of those of the river-side-delta area was 15.4 and that of the in-land was 2.8. On the other hand, in the schoolchildren, EPmg was 3.2, and no difference was seen between the two areas, the river-side-delta area and the inland area. 6) In the transition of the intensity of the infection by area, EPmg among the inhabitants inexplically increased from 7.8 in 1967 to 15.4 in 1983. This was probably caused by uneven specimen collection in the process of sampling the population. EPmg of the inhabitants in the inland area and those of the schoolchildren of both riverside delta and inland areas showed a similar decrease in the past 16 years. 7) The intensity of the infection by age showed a relatively low level in the 20-29 age group and below, and EPmg 5.1-9.5 was seen in the 30-39 age group and over. Sex, Epmg was 5.8 in the male and 4.7 the female. By in 8) In the transition of the intensity of the infection, EPmg decreased from 6.2 in 1967 to 5.4 in 1983. By age, in contrast to the figures of 1967 in which EPmg gradually increased with some fluctuation from 1.1 in the 0-4 age group to peak 10.5 in the 50-59 age group, in 1983 lower intensity of the infection was seen in the age group from 10-14 to 20-29 with the EPmg range of 0.6-2.7. 9) In the distribution of the clonorchiasis cases by the range of EPmg value, 43.2% of the cases were in 0.1 0.9 and 34.6% in 1.0-4.9. As a whole by cumulative percent, 44.6% of them were under 0.9 as light infection and 86.1% of them under 9.9 up to moderate infection. By sex, no difference was seen in Epmg. 10) In the transition of the distribution by the range of Epmg, the cases were distributed up to the range 80.0-99.9 in 1967 and to 60.0-79.9 in 1983. By cumulative percent, in the range of 0.1-0.9 and less, light infection, 34.3% of them were distributed in 1967 and 44.6% in 1983 with about 10% increase. In the range of 5.0-9.9 and less, up to moderate infection, 83.2% in 1967 and 86.1% in 1983 of the cases were seen, respectively. 11) The practice of raw freshwater fish consumption among the inhabitants seems to have decreased in recent years. Those who admitted to raw freshwater fish consumption in the last two years among the infected inhabitants were 59.3%, although 86.8% of them professed to have experience with raw freshwater fish consumption. 31.7% of those who have had experience of the raw freshwater fish consumption denied any further consumption in recent years. From an interview of 543 school-children, 24.1% of them admitted to an experience of raw freshwater fish consumption. However, those who have practised in the past two years comprized 17.9%. Those who denied raw freshwater fish consumption in recent years among those who had such experience were 26.0% out of 131 interviewed. The rate of raw freshwater fish consumption in both inhabitants and schoolchildren were higher in the male than in the female. On the contrary, the rate of those who did not practise in recent years among those who had experience of raw freshwater fish consumption was higher in the female than in the male. 12) The major reason for the reduction of raw freshwater fish consumption among the local inhabitants was the risk of the fluke infection. However, it has become apparent that such change of taste has resulted from water pollution impact which has affected throughout the areas of the freshwater systems in this locality since last several years. 13) In animal survey, Clonorchis infection was seen in 14.8% of 88 dogs examined and 3.7% of 27 house rats examined. It was noted that populations of dogs and cats have increased in the villages surveyed. Although the prevalence rate was lower in the present survey than those of 1967, the significance of the animals as the reservoir host has not changed. 14) Prevalence rate of Clonorchis infection by cercariae in the first intermediate host, Parafossarulus manchouricus, was 0.6% out of 517 snails examined. The infection rate was lower in comparison with 2.3% out of 2,124 examined in 1967. Moreover, sharp decreases in number and distribution of the intermediate host snails in many watershed areas of the huge freshwater systems in this locality seemed to reduce transmission of Clonorchis in connection with the intermediate host stage of its life cycle. 15) Clonorchis infection in the second intermediate fish hosts was relatively low. The mean number of Clonorchis metacercaria per fish in Pseudorasbora parva was 517 in 1983, whereas it was 1943 in 1968 through 1969. Environmental water pollution has also caused the decreased fish population density in these areas, and this has also apparently affected to the practice of raw freshwater fish consumption among the local inhabitants. 16) In conclusion, endemicity of Clonorchis infection in Gimhae Gum and delta area of the Nagdong River has sharply decreased during the past 16 years. The major cause of the regressive transition of the infection was the water pollution of the land water systems of this locality. The pollution has upset the ecosystems comprizing of the intermediate hosts of Clonorchis in many areas, and also affected to a significant extent to the discontinuance of the local inhabitants for raw freshwater fish consumption.

• 농업과학연구
• /
• 제9권1호
• /
• pp.396-450
• /
• 1982

육종(育種) 자료(資料)를 얻기위해 수집(蒐集)한 한국(韓國) 재래종(在來種) 옥수수 57계통(系統)에 대(對)하여 주성분(主成分) 분석(分析)을 이용(利用)하여 재래종(在來種) 옥수수를 해석(解析)하고 계통분류(系統分類)를 하고 분류(分類)된 계통군별(系統群別)로 주요(主要) 특성(特性)에 대(對)한 유전적(遺傳的) 특성(特性)을 구명(究明)하고자 본(本) 연구(硏究)를 수행(修行)하였던 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 특성(特性)들의 평균치(平均値)는 모든 특성(特性)에서 계통간(系統間) 차이(差異)가 있었으며 비중(比重)을 제외(除外)한 모든 특성(特性)에서 교배유형별(交配類型別)로 차이(差異)가 있었는데 출수기(出穗期)까지의 일수(日數)를 제외(除外)한 모든 특성(特性)에서 자식(自殖)된 계통(系統)의 것은 세력(勢力)이 감소(減少)되었고 톱교배(交配)된 계통(系統)의 것은 세력(勢力)이 증대(增大) 되었다. 2. 특성간(特性間)의 상관계수(相關係數)는 0.99~-0.59 사이에 분포(分布)하였는데 특성간(特性間)의 상관(相關)은 대체(大體)로 낮은 것이 많았다. 그러나 수량구성요소(收量構成要素)와 관련(關聯)된 주요특성(主要特性)에서는 상관(相關)이 높았고 교배유형(交配類型)에 따른 특성간(特性間)의 상관계수(相關係數)의 크기는 별(別) 차이(差異)가 없었다. 3. 27개(個) 특성(特性) 가운데서 12개(個)의 주요특성(主要特性)을 이용(利用)한 주성분(主成分) 분석(分析)에서 제(第)4 주성분(主成分)까지를 가지고 전(全) 변동(變動)의 86.4%를 형매교배(兄妹交配)에서, 84.3%를 자식교배(自殖交配)에서 81.1%를 톱교배(交配)에서 각각(各各) 설명(說明)할 수 있었다. 4. 주성분(主成分)에 대(對)한 특성(特性)의 기여율(寄與率)은 특성(特性)에 따라 달랐고 상위(上位) 주성분(主成分)에서 컸으며 하위(下位) 주성분(主成分)에서 작았다. 5. 주성분(主成分)과 특성간(特性間)의 상관계수(相關係數)는 주성분(主成分)의 생물학적(生物學的) 의의(意義)와 주성분(主成分)에 대응(對應)한 식물체(植物體)의 형(型)을 명확(明確)히 하였는데 제(第)1 주성분(主成分)은 식물체(植物體)의 크기에 관련(關聯)된 주성분(主成分)이었고, 제(第)2 주성분(主成分)은 식물체(植物體)의 분화(分化) 및 생장기간(生長期間)에 관련(關聯)된 주성분(主成分)이었고, 제(第)3 주성분(主成分)과 제(第)4 주성분(主成分)은 형매교배(兄妹交配)된 계통(系統) 및 자식계통(自殖系統)에서는 뚜렷한 특징(特徵)이 없었으나 톱교배(交配)된 계통(系統)에서는 엽(葉)의 크기에 관련(關聯)된 주성분(主成分)이었다. 6. 계통간(系統間) 거리(距離)에 의(依)해 57계통(系統)은 4개(個)의 계통군(系統群)으로 분류(分類)되었으나 전계통(全系統)의 91.1%인 52계통(系統)이 계통군(系統群) I로 분류(分類)되어 수집(蒐集)된 재래종(在來種) 옥수수의 대부분(大部分)이 동일계통(同一系統)인 것으로 나타났고, 계통군(系統群) II에는 3계통(系統)이, 계통군(系統群) III과 계통군(系統群) IV에는 각각(各各) 1계통(系統)이 속(屬)하였다. 계통군(系統群) I은 조생(早生), 단간(短稈), 중형자수(中型雌穗), 중립(中粒) 및 중수(中收) 계통(系統)들이었고, 계통군(系統群) II는 만생(晩生), 중간(中稈), 소형자수(小型雌穗), 소립(小粒), 다자수(多雌穗) 및 다수(多收) 계통(系統)들이었다. 계통군(系統群) III은 중생(中生), 장간(長稈), 소형자수(小型雌穗) 및 소립(小粒), 소수(少收) 계통(系統)들이었고, 계통군(系統群) IV는 중생(中生), 장간(長稈), 대형자수(大型雌穗), 소자수(少雌穗) 및 중수계통(中收系統)이었다. 7. 특성(特性)들의 자식열세도(自殖劣勢度)는 계통(系統)에 따라 차이(差異)가 있었으며 수량(收量), 이삭중(重), 초장(草長) 등(等)에서 비교적(比較的) 크게 나타났고, 분류(分類)된 군별(群別) 자식열세도(自殖劣勢度)는 100 입중(粒重), 엽수(葉數), 엽장(葉長) 및 출수기(出穗期)까지의 일수(日數) 등(等)의 특성(特性)이 계통군(系統群) I에서 컸고, 기타의 특성(特性)은 계통군(系統群) II에서 컸다. 8. 특성(特性)들의 잡종강세도(雜種强勢度)는 계통간(系統間) 차이(差異)가 있었으며 이삭중(重), 이삭당(當) 입중(粒重), 100입중(粒重) 및 엽장(葉長) 등(等)에서 높았으며 분류(分類)된 군별(群別)로 보면 이삭길이, 이삭직경(直徑), 이삭중(重), 이삭당(當) 입중(粒重), 100 입중(粒重) 및 엽장(葉長) 등(等)의 특성(特性)은 계통군(系統群) II에서 높았고 기타의 특성(特性)은 계통군(系統群) I에서 높았다. 9. 특성(特性)들의 동질접합체(同質接合體) 정도(程度)는 이삭중(重)(79.1%)에서 가장 높았으며 이삭 수(數)(-2.1%)에서 가장 낮았는데 특성별(特性別)로 큰 차이(差異)가 있었다. 분류(分類)된 군별(群別)에 있어서도 동질접합체(同質接合體) 정도(程度)는 특성(特性)에 따라 차이(差異)가 있었는데 계통군(系統群) II에서 높은 것이 많았고 계통군(系統群) I에서 낮은 것이 많았다. 10. 형매교배(兄妹交配)된 계통(系統)의 특성(特性)과 톱 교배(交配)된 계통(系統)의 특성(特性)과의 상관관계(相關關係)는 모든 특성(特性)에서 정(正)의 상관(相關)을 나타내었으며 이삭수(數), 초장(草長), 엽장(葉長), 수량(收量) 및 단백질(蛋白質) 함량(含量) 등(等)에서 높은 상관(相關)을 나타내었으며 이삭 직경(直徑), 100입중(粒重) 및 엽수(葉數) 등(等)에서는 유의성(有意性)이 인정(認定)되지 않았다.

• 한국산림과학회지
• /
• 제42권1호
• /
• pp.1-38
• /
• 1979

Ilex속(屬) 수목(樹木)의 변이(變異)와 증식법(增殖法)을 연구(硏究)하기 위(爲)하여 호랑가시 나무 10개(個) 집단(集團), 꽝꽝나무 7개(個) 집단(集團), 먼나무 5개(個) 집단(集團), 감탕나무 3개(個) 집단(集團), 청대팻집나무 2개체(個體), 대팻집나무 1개체(個體), 낙상홍 20개체(個體)로 총(總) 28(個) 집단(集團), 170개체(個體)를 조사(調査)하였다. 각(各) 개체(個體)를 대상(對象)으로 하여 외형적(外形的) 특성(特性), 엽(葉)의 형태적(形態的) 특성(特性) 및 열매의 형태적(形態的) 특성(特性)에 대(對)한 변이(變異)를 수종별(樹種別)로 조사분석(調査分析)하였다. 집단(集團)으로 자생(自生)하고 있는 호랑가시나무 6개(個) 집단(集團)과 꽝꽝나무 4개(個) 집단(集團)은 Transect조사(調査)를 하였다. 증식법(增殖法)으로는 파종(播種)과 삽목(揷木)을 하였다. 그 결과(結果)는 다음과 같이 요약(要約)된다. 1. 호랑가시나무는 일반적(一般的)으로 10년생(年生) 이상(以上)의 성숙목(成熟木)이 되면 수고(樹高) 1m, 근원경(根元徑)이 2cm이상(以上)이 되는 것으로 추정(推定)된다. 잎과 열매의 형태적(形態的) 특성(特性) 조사(調査)에서 엽장(葉長), 엽폭(葉幅), 엽병장(葉柄長), 거치수(鋸齒數) 및 과장(果長)은 집단간(集團間), 집단내(集團內) 개체간(個體間)에 유의(有意)한 차이(差異)를 보였다. 과폭(果幅), 과병장(果柄長)은 집단간(集團間) 차이(差異)에는 유의성(有意性)이 인정(認定)되지 않았고, 집단내(集團內) 개체간(個體間) 차이(差異)는 유의성(有意性)이 인정(認定)되었다. 2. 꽝꽝나무의 잎과 열매의 특성(特性) 조사(調査)에서 엽장(葉長), 엽폭(葉幅), 엽병장(葉柄長), 거치수(鋸齒數), 과병장(果柄長)은 집단간(集團間), 집단내(集團內) 개체간(個體間)에 통계학적(統計學的)으로 유의(有意)한 차이(差異)를 보였다. 과장(果長), 과폭(果幅)은 집단간(集團間)의 차이(差異)에는 유의성(有意性)이 없었으나, 집단내(集團內) 개체간(個體間)에는 유의(有意)한 차이(差異)를 보였다. 7개(個) 집단중(集團中) 엽장(葉長)과 엽폭(葉幅)에서 5개(個) 집단(集團), 5개(個) 집단중(集團中) 과장(果長)과 과폭(果幅)에서 4개(個) 집단(集團)이 기간(其間)의 정(正)의 상관(相關)을 나타냈다. 3. 먼나무의 잎과 열매의 특성(特性) 조사(調査)에서 엽장(葉長)만이 집단간(集團間), 집단내(集團內) 개체간(個體間)의 차이(差異)에서 유의성(有意性)이 있었고, 엽폭(葉幅), 엽병장(葉柄長), 과장(果長), 과폭(果幅), 과병장(果柄長)은 집단간(集團間)에는 차이(差異)가 없었으나, 집단내(集團內) 개체간(個體間)에는 유의(有意)한 차이(差異)를 보였다. 5개(個) 집단중(集團中) 엽장(葉長)과 엽폭(葉幅)에서 2개(個) 집단(集團)이 기간(其間)의 정(正)의 상관(相關)이 있었고, 과장(果長)과 과폭(果幅)에서는 4개집단(個集團) 모두 상관(相關)이 없는 것으로 나타났다. 4. 감탕나무 잎의 형태적(形態的) 특성(特性) 조사(調査)에서 엽장(葉長), 엽폭(葉幅), 엽병장(葉柄長)이 집단간(集團間)에는 차이(差異)가 없었으나, 집단내(集團內) 개체간(個體間)에는 유의(有意)한 차이(差異)를 보였다. 엽장(葉長)과 엽폭(葉幅)에서 3개(個) 집단중(集團中) 1개(個) 집단(集團)만이 기간(其間)의 정(正)의 상관(相關)을 보였다. 5. 청대팻집나무 잎의 특성(特性) 조사(調査)에서 개체(個體) 2가 개체(個體) 1보다 엽장(葉長), 엽폭(葉幅)의 측정치(測定値)가 컸고, 엽병장(葉柄長)은 직았다. 6. 호랑가시나무의 기공밀도(氣孔密度) 조사(調査)에서 집단별(集團別) 평균기공밀도(平均氣孔密度)와 한량지수(寒量指數)에는 높은 상관(相關)을 가진다. 내동성(耐冬性)이 강(强)한 집단(集團)일수록 기공밀도(氣孔密度)는 적어지는 것으로 나타났다. 그리고 엽신(葉身)의 하부(下部), 상부(上部), 중부순(中部順)으로 기공밀도(氣孔密度) 경향(傾向)이 있었으나 통계분석(統計分析) 결과(結果)로써는 부위간(部立間)의 차이(差異)가 증가(增加)되는에서 유의성(有意性)이 인정(認定)되지 않았다. 꽝꽝나무는 기공밀도(氣孔密度)와 한량지수간(寒量指數間)에서 통계학적(統計學的)으로 상관(相關)이 인정(認定)되지 않는 것으로 나타났다. 엽신(葉身)의 부위간(部位間)에는 하부(下部), 중부(中部), 상부(上部)의 순(順)으로 기공밀도(氣孔密度)가 높아지는 것을 통계학적(統計學的)으로 인정(認定)할 수 있었다. 7. Transect조사(調査) 결과(結果) 호랑가시나무는 일반적(一般的)으로 경사(傾斜)가 완만(緩慢)하고 해발고(海拔高)가 낮은 바닷가의 사질토양(砂質土壤)에서 잘 자생(自生)하는 것으로 나타났다. 호랑가시나무를 제외(除外)한 Transect 구내(區內)의 구성종(構成種)으로는 해송(海松)을 주(主)로 하고 환삼덩굴, 산딸기, 칡, 들장미 등(等)이 나타났다. 자연집단(自然集團)에 있어서 호랑가시나무의 성비(性比)(자(雌):웅(雄))는 약(約) 1:2로 웅수(雄樹)가 더 많았다. 꽝꽝나무는 일반적(一般的)로 부식량(腐植量)이 많고 습(濕)한 소교목지대(小喬木地帶)에서 잘 자생(自生)하며, 황칠나무, 청미래덩굴, 삼나무, 단풍나무, 솔비나무, 굴거리나무 등(等)과 혼생(混生)하는 것으로 나타났다. 자연집단(自然集團)에서 꽝꽝나무의 성비(性比)는 약(約) 1:1로 나타났다. 8. 호랑가시나무의 경우(境遇) 삽수(揷穗)를 일년생(一年生) 지(枝)에서 채취(採取)하여 10cm 깊이로 조제(調製)하고, IBA로 처리(處理)한 뒤 흙떡꽂이를 실시(實施)한 삽목(揷木) 결과(結果) 좋은 근계(根系)와 높은 발근율(發根率)을 얻을 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.