• 한국농공학회지
• /
• 제38권5호
• /
• pp.140-154
• /
• 1996

In this study, displacement, deformation, and stability according to change of cohesion and internal friction angle were investigated through elasto-plastic method, finite-element method, and in-site experiment when excavating soft ground using sheet pile. The results of the study were as follows : 1. The horizontal displacement was 5.5% of the excavation depth by the elasto-plastic method and 3.9% of the excavation depth by the on-site experiment at the final excavation depth(GL-8.Om) on the condition of double stair strut after excavating GL-6.Om. 2. Relationships between cohesion(c) and internal friction angle $({\varphi})$ when safety factor to the penetration depth was 1.2 is shown in the following equations : (a) c= -O.0086$({\varphi})$+ O.3(D=3m) and (b) c=-0.00933$({\varphi})$+0.14(D=4m). 3. The results of elasto-plastic method and the experiment show that possible excavation depth was GL-6.Om after setting single stair strut in a short period in terms of possibility of carrying out on the condition of experimental site on the contrary general reinforcement method, setting double stair strut after excavating GL-4.0m. 4. After setting the strut, distribution of the horizontal displacement had concentrated on the excavation base and possible local failure which the shear strain caused decreased by the strut reinforced. 5. After setting strut, displacement of sheet pile was decreased by half, the limit of stable excavation depth of ground was GL-8.Om, and the maximum horizontal displacement at the GL-8.Om was 1.6% of excavation depth by the elasto-plastic method, 0.7% of excavation depth by the finite-element method.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.304-311
• /
• 2002

절리의 기하학적 특성이 절리의 수직변형 및 투수성에 미치는 영향에 대해 수치해석적 방법을 통해 연구하였다. 실험적 계측 결과에 의하면, 절리의 간극은 통계적 방법에 의해 묘사되며 이에 근거하여 수치해석에 사용할 수 있는 절리를 모사할 수 있었다. 이를 위해. 자동 상관관계 함수를 이용하여 다양한 공간 상관길이의 인공 절리를 발생하였으며, 이를 토대로 수직변천 모델 및 수리해석 모델을 개발하였다. 수직변형 모델은 수직응력에 의한 절리면의 압축과 변형을 고려하여 절리의 변형거동을 해석하려 시도하였으며, cubic law에 근거한 유한차분법을 이용하여 수리해석을 수행하였다. 여러 가지 공간 상관길이의 인공 절리에 대한 수직변형 거동 및 이에 따른 수리해석의 결과, 간극의 공간 상관길이가 증가함에 따라 절리의 수직변형 및 투수성 감소가 분명하였다. 절리의 수직강성 역시 간극의 상관길이에 영향을 받는 것으로 나타났으며, 이로 인해 절리의 투수성이 수직강성과 내재적 관계가 있음을 유추할 수 있겠다. 본 연구 결과는 공학적 프로젝트로 인한 절리 암반의 수리-역학적 거동을 이해하는데 공헌할 것으로 사료된다.

• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.283-292
• /
• 2013

본 논문은 교량 하부에서 발생된 화재에 대한 강-콘크리트 합성구조의 전반적 국부적 손상평가를 위한 수치해석적 연구이다. 수치해석의 정확성 및 효율성을 높이기 위해 구성재료의 과도 비선형 열적 열역학적 특성이 고려된 열-구조 연성병렬 화재해석 기법이 제안되고, ANSYS solver와 연결되어 해석이 수행되며, 표준화재시험과 비교 검증된다. 검증된 해석기법을 통해 국내에서 발생된 부천고가교 합성구조에 대한 화재손상해석이 수행된다. 해석결과 강박스 거더의 하부 플랜지 및 복부의 경우 임계온도를 초과하였고 구조적 처짐과 변형 형상이 화재사고 결과와 비교적 잘 일치하였다.

• International Journal of Oral Biology
• /
• 제30권1호
• /
• pp.17-22
• /
• 2005

In the previous studies of Saccharomyces cerevisiae, Abp140p (actin binding protein 140) fused to GFP has been only a protein that can label actin cables of yeast cells so far. However, the role of Abp140p in actin dynamics was remained elusive. In this study, the function of Abp140p was investigated with a deletion mutant and overexpression of GFP fused Abp140p. The deletion mutant was slightly more susceptible to Latrunculin-A (Lat-A), an actin-monomer sequestering agent, than wild type, although no significant deformation of actin structures was caused by ABP 140 deletion. Overexpression of Abp140p-GFP retarded cell growth, and produced thick and robust actin cables. Lat-A was not able to destabilize the thick actin cables, which suggests that actin dynamics was compromised in the cells with surplus of Abp140p. Therefore, Abp140p seems to stabilize actin cables together with other bundling proteins. Recently, actin cable dynamics of budding yeast was found to have a resemblance to that of filopodial tip of cultured mammalian cells. Retrograde movement of actin cables from buds to mother cells indicated local generation of the cable at bud sites. By using Abp140p-GFP, we traced the steps in the generation of a new actin cable after elimination of old cables by sodium azide. Before the appearance of a new actin cable, Abp140p-GFP concentrated in buds and disappeared, as mother cells became abundant in actin cables. Our observations provide a direct evidence of actin cable formation at buds of budding cells.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.441-454
• /
• 2020

The tunnel collapse, large deformation of surrounding rock, water and mud inrush are the major geological disasters in soft rock tunnel construction. Among them, tunnel collapse has the most serious impact on tunnel construction. Current research backed theories have certain limitations in identifying the collapse risk of soft rock tunnels. Examining the Zhengwan high-speed railway tunnel, eight soft rock tunnel collapse influencing factors were selected, and the combination of indicator weights based on the analytic hierarchy process and entropy weighting methods was obtained. The results show that the groundwater condition and the integrity of the rock mass are the main influencing factors leading to a soft rock tunnel collapse. A comprehensive fuzzy evaluation model for the collapse risk of soft rock tunnels is being proposed, and the real-time collapse risk assessment of the Zhengwan tunnel is being carried out. The results obtained via the fuzzy evaluation model agree well with the actual situation. A tunnel section evaluated to have an extremely high collapse risk and experienced a local collapse during excavation, verifying the feasibility of the collapse risk evaluation model. The collapse risk evaluation model proposed in this paper has been demonstrated to be a promising and innovative method for the evaluation of the collapse risk of soft rock tunnels, leading to safer construction.

• 대한화학회지
• /
• 제38권1호
• /
• pp.1-7
• /
• 1994

알루미노인산염 족($AlPO_4-5$, BAPO-5, 그리고 SAPO-5)분자체의 구조 골격인 가교 $$T_1-OH-T_2$(T_1$ = Al, B 그리고 $T_2=$ P, Si) 안정성 및 가교 OH 그룹 이온성을 연구하기 위하여 반경험적 MNDO 계산 방법으로 연구하였다. 이러한 계산은 Al-OH-P, B-OH-P 그리고 Al-OH-Si덩어리 모델로써 실행하였다. Al-OH-P가교 모델에서 Al대신에 B원자를 치환할 때 B-OH-Si가교에서는 변형이 우선적으로 일어났으나, P 대신에 Si원자를 치환한 Al-OH-Si가교에서는 회전이 우선적으로 일어났다. 이러한 모델 덩어리에서 OH그룹 이온성 및 가교 안정성은 B-OH-P < Al-OH-P < Al-OH-Si 가교 순서로 증가하였다.

• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.98-106
• /
• 1995

대형구조물의 국부구조계에는 후판, 선체이중저와 같은 복판팬널 또는 FRP판과 같은 복합적층판에 집중질량, 질량-스프링계 또는 지지스프링 등으로 간주되는 부가제가 추가된 복합제의 진동해석을 수행하여야 되는 경우가 않다. 본 연구에서는 팬널의 receptance와 부가계의 receptance를 합성하여 복합제의 고유진동특성 및 강제진동응답을 효과적으로 얻을 수 있는 receptance 방법의 적용을 제시한다. 상기 팬널들은 전단변형 및 회전관성효과가 매우 크고 대부분 직교이방성 강성을 갖기 때문에 직교이방성 Mindlin판유추 구조계로 간주하였으며, Mindlin판유추 구조계의 receptance를 구하기 위해 assumed mode-Lagrange 운동방정식 원용에 의해 구하는 방법을 정식화하였다. 이때 진동파형은 Timoshenko 보함수 또는 이의 성질을 갖는 다항식을 사용하였다. 등방성후판 및 실선 이중저의 1/8축적 모델을 대상으로 일련의 수치계산을 수행하여 본연구에서 제시한 방법의 타당성을 보였다.

• 한국지진공학회논문집
• /
• 제6권3호
• /
• pp.31-40
• /
• 2002

이 연구는 철근콘크리트 교각의 지진응답을 파악하고 합리적이면서 경제적인 내진설계기준의 개발을 위한 자료를 제공하는데 그 목적이 있다. 정확하고 올바른 지진손상 평가를 위하여 비선형 유한요소해석 프로그램을 사용하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트 속에 있는 철근모델을 조합하여 고려하였다. 이에 대한 콘크리트의 균열모델로서는 분산균열모델을 사용하였다. 두께가 서로 다른 부재간의 접합부에서 단면강성이 급변하기 때문에 생기는 국소적인 불연속변형을 고려하기 위한 경계면요소를 도입하였다. 또한, 같은 변위진폭에 있어서의 하중재하 회수에 의한 효과를 고려하였다. 연계논문에서는 철근콘크리트 교각의 지진손상 평가를 위해 제안한 해석기법을 신뢰성 있는 연구자의 실험결과와 비교하여 그 타당성을 검증하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.255-261
• /
• 2003

Tunnelling in poor and heterogeneous ground is a difficult task. Even with a good geological investigation, uncertainties with respect to the local rock mass structure will remain. Especially for such conditions, a reliable short-term prediction of the conditions ahead and outside the tunnel profile are of paramount importance for the choice of appropriate excavation and support methods. The information contained in the absolute displacement monitoring data allows a comprehensive evaluation of the displacements and the determination of the behaviour and influence of an anisotropic rock mass. Case histories and with numerical simulations show, that changes in the displacement vector orientation can indicate changing rock mass conditions ahead of the tunnel face (Schubert & Budil 1995, Steindorfer & Schubert 1997). Further research has been conducted to quantify the influence of weak zones on stresses and displacements (Grossauer 2001). Sellner (2000) developed software, which allows predicting displacements (GeoFit$\circledR$). The function parameters describe the time and advance dependent deformation of a tunnel. Routinely applying this method at each measuring section allows determining trends of those parameters. It shows, that the trends of parameter sets indicate changes in the stiffness of the rock mass outside the tunnel in a similar way, as the displacement vector orientation does. Three-dimensional Finite Element simulations of different weakness zone properties, thicknesses, and orientations relative to the tunnel axis were carried out and the function parameters evaluated from the results. The results are compared to monitoring results from alpine tunnels in heterogeneous rock. The good qualitative correlation between trends observed on site and numerical results gives hope that by a routine determination of the function parameters during excavation the prediction of rock mass conditions ahead of the tunnel face can be improved. Implementing the rules developed from experience and simulations into the monitoring data evaluation program allows to automatically issuing information on the expected rock mass quality ahead of the tunnel.

• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.791-798
• /
• 2012

Since standardized fracture test specimens cannot be easily extracted from in-service components, several alternative fracture toughness test methods have been proposed to characterize the deformation and fracture resistance of materials. One of the more promising alternatives is the local approach employing the SP(Small Punch) testing technique. However, this process has several limitations such as a lack of anisotropic yield potential and tediousness in the damage parameter calibration process. The present paper investigates estimation of ductile fracture resistance(J-R) curve by FE(Finite Element) analyses using an anisotropic damage model and enhanced calibration procedure. In this context, specific tensile tests to quantify plastic strain ratios were carried out and SP test data were obtained from the previous research. Also, damage parameters constituting the Gurson-Tvergaard-Needleman model in conjunction with Hill's 48 yield criterion were calibrated for a typical nuclear reactor material through a genetic algorithm. Finally, the J-R curve of a standard compact tension specimen was predicted by further detailed FE analyses employing the calibrated damage parameters. It showed a lower fracture resistance of the specimen material than that based on the isotropic yield criterion. Therefore, a more realistic J-R curve of a reactor material can be obtained effectively from the proposed methodology by taking into account a reduced load-carrying capacity due to anisotropy.