• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1209-1213
• /
• 2005

It reflects well feature of slope that is characteristic of city river basin of Pusan local. Process various hydrological datas and basin details datas which is collected through basin basis data. weather satellite equipment(EMS-DEU) and automatic water level equipment(AWS-DEU) and use as basin input data of ILLUDAS model, SWMM model and HEC-HMS model In order to examine outflow feature of experiment basin and then use in reservoir design of experiment basin through calibration and verification about HEC-HMS model. Inserted design rainfall for 30 years that is design criteria of creek into HEC-HMS model and then calculated design floods according to change aspect of the impermeable rate. Capacity of reservoir was determined on the outflow mass curve. Designed imagination reservoir(volume $54,000m^3$) at last outlet upper stream of experiment basin, after designing reservoir. It could be confirmed that the peak flow was reduced resulting from examining outflow aspect. Designing reservoir must decrease outflow of urban areas.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.333-336
• /
• 1991

In this paper, Hopfield & Tank model-like artificial neural network structure is proposed, which can be used for the optimal path planning problems such as the unit commitment problems or the maintenance scheduling problems which have been solved by the dynamic programming method or the branch and bound method. To construct the structure of the neural network, an energy function is defined, of which the global minimum means the optimal path of the problem. To avoid falling into one of the local minima during the optimization process, the simulated annealing method is applied via making the slope of the sigmoid transfer functions steeper gradually while the process progresses. As a result, computer(IBM 386-AT 34MHz) simulations can finish the optimal unit commitment problem with 10 power units and 24 hour periods (1 hour factor) in 5 minites. Furthermore, if the full parallel neural network hardware is contructed, the optimization time will be reduced remarkably.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.611-614
• /
• 2006

매년 발생하는 산사태에 대한 피해를 최소화하기 위하여 일본의 사면 붕괴와 대책방안에 대한 조사를 실시하였다. 지난 2006년 7월 강원도 영서지방에 발생한 산사태 피해 현황을 살펴보고 사방기술의 선진국인 일본을 방문, 이에 대한 자료를 수집 분석하였다. 산악지형으로 구성된 지형이 국내와 매우 유사하고 자연재해가 더욱 많은 일본의 선진 사방대책에 대한 기술을 습득하여 국내형의 기술개발과 정책결정에 도움을 얻고자 본 조사를 실시하였다. 본고는 수집된 자료를 바탕으로 국내의 정황과 비교하며 정리한 것이다.

• Journal of computational fluids engineering
• /
• v.16 no.4
• /
• pp.47-54
• /
• 2011

A rotating propeller of turboprop aircraft gives much effect on the aerodynamic characteristics of wing such as lift, moment and stall. Specially propeller effect on the wing surface is much more dominant when aircrafts are in landing or take-off conditions. In the present paper, three dimensional Navier-Stokes simulations for the interaction of propeller and wing were carried out for medium sized turboprop aircraft. For rotating propeller, unsteady sliding mesh method was used to simulate a relative motion between moving and static bodies. For the power effect analysis in landing and take off configurations, double slotted flap was also considered and the aerodynamic characteristics were investigated. It was shown that the propeller slipstream enhanced the lift slope including maximum lift by eliminating local flow separation region and this enhancement was more dominant with high lift device.

• Proceedings of the Korean Quaternary Association Conference
• /
• 2005.06a
• /
• pp.7-11
• /
• 2005

The soil erosion processes have estimated using spatial distribution of 137Cs radionuclide in Granite and Sedimentary Hillslopes in South Korea. The local variability of 137Cs inventory indicates that was related positively to organic matter content, clay content and water content and negatively to hydraulic permeability and slope gradient for bulk samples in different landforms within Granite and Sedimentary rock basins. The vertical variability of 137Cs inventory shows that most of 137Cs concentration and organic matter were accumulated between 0 and 2cms and gradually decrease with soil depth in incremental samples in both basins. The vertical variability of 137Cs inventories shows that 137Csinventories increase as we go to toward downslope in both basins. Finally, the soil loss values indicate that hillslope erosion processes are more intensive in Granite rock basin than those in Sedimentary rock basin.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.393-396
• /
• 2003

This paper proposes a method to speed up the document image binarization using a water flow model. The proposed method extracts the region of interest (ROI) around characters from a document image and restricts pouring water onto a 3-dimensional terrain surface of an image only within the ROI. The amount of water to be filled into a local valley is determined automatically depending on its depth and slope. Then, the proposed method accumulates weighted water not only on the locally lowest position but also on its neighbors. Finally, the depth of each pond is adaptively thresholded for robust character segmentation. Experimental results on real document images shows that the proposed method has attained good binarization performance as well as remarkably reduced processing time compared with that of the existing method based on a water flow model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.549-556
• /
• 2009

One of the basic technology for implementing the autonomy of UGV(Unmanned Ground Vehicle) is a path planning algorithm using obstacle and raw terrain information which are gathered from perception sensors such as stereo camera and laser scanner. In this paper, we propose a generation method of DVGM(Directional Velocity Grid Map) which have traverse speed of UGV for the five heading directions except the rear one. The fuzzy system is designed to generate a resonable traveling speed for DVGM from current patch to the next one by using terrain slope, roughness and obstacle information extracted from raw world model data. A simulation is conducted with world model data sampled from real terrain so as to verify the performance of proposed fuzzy inference system.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.47.1-47.1
• /
• 2013

Supersonic turbulence is believed to decay rapidly within a flow crossing time irrespective of the degree of magnetization. However, this consensus of decaying magnetohydrodynamic (MHD) turbulence relies on local isothermal simulations, which are unable to investigate the role of global magnetic fields and structures. Utilizing three-dimensional MHD simulations including interstellar cooling and heating, we investigate decaying MHD turbulence within cold neutral medium sheets embedded in warm neutral medium. Early evolution is consistent with previous studies characterized rapid decay of turbulence with the decaying time shorter than a flow crossing time and power-law temporal decay of turbulent kinetic energy with slope of -1. If initial magnetic fields are strong and perpendicular to the sheet, however long term evolutions of kinetic energy shows that a significant amount of turbulent energy still remains even after ten flow crossing times, and decaying rate is reduced as field strengths increase. We analyse power spectra of remaining turbulence to show that incompressible, in-plane motions dominate.

• Structural Engineering and Mechanics
• /
• v.11 no.4
• /
• pp.443-460
• /
• 2001

This paper presents an effective application of a variable-node axisymmetric solid element designated as AQV (Axisymmetric Quadrilateral Variable-node element). The variable-node element with physical midside nodes helps to overcome some problems in connecting the different layer patterns on a quadrilateral mesh in the adaptive h-refinement. This element alleviates the necessity of imposing displacement constraints on irregular (hanging) nodes in order to enforce the inter-element compatibility. Therefore, the elements with variable mid-side nodes can be used effectively in the local mesh refinement for the axisymmetric structures which have stress concentrations. A modified Gaussian quadrature should be adopted to evaluate the stiffness matrices of the variable-node elements mainly because of the slope discontinuity of assumed displacement within the elements. Some numerical examples show the usefulness of variable-node axisymmetric elements in the practical application.

• YAKHAK HOEJI
• /
• v.39 no.1
• /
• pp.61-67
• /
• 1995

PVC membrane electrodes based on the lipophilic neutral carrier, dibenzo-18-crown-6, cyclic oligomers of teit-butylphenol-formaidehyde condensates, calix[4]arenes as the active sensors for verapamil have been prepared and tested in a variety of plasticizers. At pH 5.0, the electrode exhibits a Nernstian response in the range of 10$^{-2}$~5$\times$10$^{-5}$ M verapamil with a slope of 49.1$\pm$0.5mV per concentration decade. The electrode constructed in this work can be used continuously for at least 1 month before any damage to the membrane occurs. And the analyses of the local anesthetic amine, which are good to select a specific compound in a mixed solution, were also accomplished by using of another neutral carrier, a DB18C6, for comparing with calix[4]arene.