• Proceedings of the Korean Statistical Society Conference
• /
• 2002.05a
• /
• pp.25-28
• /
• 2002

비선형모형분석의 초기 단계에서 초기값(starting value, initial parameter value)를 결정하는 문제는 비선형모형의 모수추정을 위한 반복기법의 수렴속도나 국소값(local minimum)문제에 영향을 주게 된다. 본 논문을 통하여 탐색적 자료분석이 초기값를 결정하는 데 도움을 줄 수 있음을 보이고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.106.5-106
• /
• 2002

1. Introduction 2. Artificial Immune Networks and Navigation Algorithm 3. Obstacle Avoidance and Goal Approach Behavior 4. Weights Adjustment Using Neural Network 5. Velocity Control and Local Minimum Avoidance 6. Simulation 7. Conclusion

• Journal of computational fluids engineering
• /
• v.11 no.4 s.35
• /
• pp.1-8
• /
• 2006

Clocking effects of a stator on the performance and internal flow in an UTRC 1.5 stage axial turbine are investigated using a three-dimensional unsteady flow simulation. Six relative positions of two rows of stator are investigated by positioning the second stator being clocked in a step of 1/6 pitch. The relative efficiency benefit of about 1% is obtained depending on the clocking positions. However, internal flows have some different characteristics from that in the previous study at the best and worst efficiency positions, since the first stator wake is mixed out with the rotor wake before arriving at the leading edge of the second stator. Instead of the first stator wake, it is found that the wake interaction of the first stator and rotor has a important role on a relative efficiency variation at each clocking position. The time-averaged local efficiency along the span at the maximum efficiency is more uniform than that at the minimum efficiency. That is, the spanwise efficiency distribution at the minimum efficiency has larger values in mid-span but smaller values near the hub and casing in comparison to those at the maximum efficiency. Moreover, the difference between maximum and minimum instantaneous efficiencies during one period is found to be smaller at the maximum efficiency than at the minimum efficiency.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.4
• /
• pp.217-222
• /
• 2010

Since 1980's, optimum design techniques for ship structural design have been developed to the preliminary design which aims at minimum weight or minimum cost design of mid-ship section based on analytic structural analysis. But the optimum structural design researches about the application for the detail design of local structure based on FEA have been still insufficient. This paper presents optimization technique for the detail design of a racing motor boat. To improve the performance and reduce the damage of a real existing racing boat, direct structural analyses; static and non-linear transient dynamic analyses, were carried out to check the constraints of minimum weight design. As a result, it is shown that the optimum structural design of a racing boat has to be focused on reducing impulse response from pitching motion than static response because the dynamic effect is more dominant. Optimum design algorithm based on nonlinear finite element analysis for a racing motor boat was developed and coded to ANSYS, and its applicability for actual structural design was verifed.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.473-480
• /
• 2005

Clocking effects of a stator on the performance and internal flow in an UTRC 1.5 stage axial turbine are investigated using a three-dimensional unsteady flow simulation. Six relative positions of two rows of stator are investigated by positioning the second stator being clocked in a step of 1/6 pitch. The relative efficiency benefit of about 1% is obtained depending on the clocking positions. However, internal flows have some different characteristics from that in the previous study at the best and worst efficiency positions, since be first stator wake is mixed out with the rotor wake before arriving at the leading edge of the second stator. Instead of the first stator wake, it is found that the wake interaction of the first stator and rotor has a important role on a relative efficiency variation at each clocking position. The time-averaged local efficiency along the span at the maximum efficiency is more uniform than that at the minimum efficiency. That is, the spanwise efficiency distribution at the minimum efficiency has larger values in mid-span but smaller values near the hub and casing in comparison to those at the maximum efficiency. Moreover, the difference between maximum and minimum instantaneous efficiencies during one period is found to be smaller at the maximum efficiency than at the minimum efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.4
• /
• pp.649-664
• /
• 2011

Cooperative spectrum sensing (CSS) with decision fusion is considered as a key technology for tackling the challenges caused by fading/shadowing effects and noise uncertainty in spectrum sensing in cognitive radio. However, most existing solutions assume an error-free decision transmission, which is obviously not the case in realistic scenarios. This paper extends the general decision-fusion-based CSS scheme by considering the fading/shadowing effects and noise corruption in the common control channels. With this more practical model, the fusion centre first estimates the local decisions using a binary minimum error probability detector, and then combines them to get the final result. Theoretical analysis and simulation of this CSS scheme are performed over typical channels, which suggest some performance deterioration compared with the pure case that assumes an error-free decision transmission. Furthermore, the fusion strategy optimization in the proposed cooperation model is also investigated using the Bayesian criteria. The numerical results show that the total error rate of noisy CSS is higher than that of the pure case, and the optimal values of fusion parameter in the counting rule under both cases decrease as the local detection threshold increases.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1054-1059
• /
• 2005

The artificial potential method uses a potential field to guide a robot from a start to a goal configuration respectively. The potential field consists of attractive potential used to pull a robot toward a goal and repulsive potential to keep it away from obstacles. However, there are two problems concerning local minimum and computational cost to be resolved in conventional artificial potential methods. This study proposes a method utilizing a spline surface that interpolates arbitrary boundaries and a domain reduction method that reduces the unnecessary area. The proposed spline surface interpolates arbitrary shaped boundaries and is used as an artificial potential to guide a robot for global motion planning of a mobile robot. A reduced domain process reduces the unnecessary domain. We apply a distance-weighted function as such a function, which blends distances from each boundary with a reduction in computational time compared with other analytical methods. As a result, this paper shows that an arbitrary boundary spline surface provides global planning and a domain reduction method reduces local minimum with quick operation.

• Architectural research
• /
• v.1 no.1
• /
• pp.47-53
• /
• 1999

An interesting of desktop air-conditioning system is the Personal Environmental Module(PEM) System. The PEM system allows the occupant to choose the desired temperature, air volume and direction of the discharged air. In this study, the measurements on the age of air and the air change effectiveness, using the tracer gas method, are carried out to analyze the ventilation performance for provision of fresh air near the breathing zone by the PEM. The relations between the PEM for optimal control and other factors related to indoor air quality, and the ventilation for the PEM are examined. Also, three different supply diffuser types(desktop, floor and ceiling) are compared in view of their ability to distribute supply air to the workstation breathing zone. The desktop diffuser type could deliver air directly to the occupants breathing zone with a high degree of effectiveness. The minimum local age of air was measured in the breathing zone, which is directly supplied with air from the PEM diffusers, and the measured local air change effectiveness of the desktop diffuser in the breathing zone was about 1.13 to 1.23 times greater than that of the ceiling and floor diffusers. When the minimum outside air change rate as specified using ASHRAE Standard 62R is supplied with a desktop diffuser type, the volume of outside air can be reduced 13 to 23%, resulting in a commensurate in ventilation energy use.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.7
• /
• pp.41-47
• /
• 2015

The bandwidth minimization problem (BMP) has been classified as NP-complete because the polynomial time algorithm to find the optimal solution has been unknown yet. This paper suggests polynomial time heuristic algorithm is to find the solution of bandwidth minimization problem. To find the minimum bandwidth ${\phi}^*=_{min}{\phi}(G)$, ${\phi}(G)=_{max}\{{\mid}f(v_i)-f(v_j):v_i,v_j{\in}E\}$ for given graph G=(V,E), m=|V|,n=|E|, the proposed algorithm sets the maximum degree vertex $v_i$ in graph G into global central point (GCP), and labels the median value ${\lceil}m+1/2{\rceil}$ between [1,m] range. The graph G is partitioned into subgroup, the maximum degree vertex in each subgroup is set to local central point (LCP), and we adjust the label of LCP per each subgroup as possible as minimum distance from GCP. The proposed algorithm requires O(mn) time complexity for label to all of vertices. For various twelve graph, the proposed algorithm can be obtains the same result as known optimal solution. For one graph, the proposed algorithm can be improve on known solution.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.77-85
• /
• 1999

In this paper. improved the formula of Kass. First of all, improved initial guess inside and outside of an object. So, prevent the of shrink, find more easily and faster the contour of object. Secondly, proposed the algorithm which moved to local minimum with the improvement of formula of the internal energy and $3{times}3$ matrix. Process the noise of local minimum with use of medial filtering. In third, process the phenomenon which edge points gather one point with imposing energy to the energy term. Improve the algorithm to find the contour precisely with the use of threshold. The result of these improvements, make an initial guess easily and find the contour of objects which have higher curvature. Improve the speed of process by reducing the repetition of feedback system.