• 암석학회지
• /
• 제8권1호
• /
• pp.46-55
• /
• 1999

Fluid inclusions in granite and hydrothermal quartz indicate that three fluids have affected the Sannae granite. The earliest fluid is represented by three-phase aqueous fluid inclusions with high salinity (38 to 46 wt.% NaCl equiv.). It was exsolves from a crystallizing melt and trapped at a relatively high-pressure condition. The secong fluid is represented by two-phase aqueous fluid inclusion with low entectic temperatures (< $-40^{\circ}C$). low- to moderate salinity (3 to 24.0 wt.% NaCl equiv.) and high homogenization temperatures$ ($309^{\circ}C$$473^{\circ}C$)($. This fluid was trapped at higher pressures than 300-500 bars and precipitated molybdenite and wolframite in quartz veins. It was probably generted by fluid-host rock interactions since they show a wide range of salinity within a narrow range of homogenization temperatures. The final fluid is represented by an aquenous fluid boiling that separated into high-salinity (34-38 wt.% NaCl equiv.) and low-salinity fluid (0 to 8.7 wt.%) at $303-376^{\circ}C$ and 50-150 bars. These boiling fluids precipitated euhedral quartz in miarolitic cavities. The compositions of the final fluid was rather complex in the $H_2$O-NaCl-KCI-$FeCl_2$ system. The Sannae granite was a locus for repeated fluid events including magmatic fluids during the final stage of crystallization, the convection of hydrothermal fluids causing a fluid ascending, fluid boiling, and the local W-Mo mineralization and formation of miarolitic cavities due to thermal, tectonic and compositional properties of the felsic granite.

• 천문학회보
• /
• 제39권1호
• /
• pp.63.2-63.2
• /
• 2014

As a part of the "Dust, Ice, and Gas In Time" (DIGIT) key program on Herschel, we observed GSS30-IRS1, a Class I protostar located in Ophiuchus (d =125 pc), with Herschel/Photodetector Array Camera and Spectrometer (PACS). More than 70 lines were detected within a wavelength range from 50 ${\mu}m$ to 200 ${\mu}m$: CO lines from J = 14-13 to 41-40, several $H_2O$ lines of Eup = 100 K to 1500 K, 16 transitions of OH rotational lines, and two atomic [O I] lines at 63 and 145 ${\mu}m$. The [C II] line, known as a tracer of externally heated gas by the interstellar radiation field, is also detected at 158 ${\mu}m$. All lines, except [O I] and [C II], are detected only at the central spaxel of $9^{\prime\prime}.4{\times}9^{\prime\prime}.4$. The [O I] emission is extended along a NE-SW orientation, which is consistent with the known outflow direction, while the [C II] line is detected over all spaxels. One possible explanation of the detection of the [C II] line and no correlation of its spatial distribution with any other molecular emission is the existence of the enhanced ISRF nearby GSS30-IRS1. One interesting feature of GSS30-IRS1 is that the continuum emission is extended beyond the point-spread function (PSF), unlike the molecular line emission, indicative of significant external heating. The best-fit continuum model of GSS30-IRS1 with the physical structure including flared disk, envelope, and outflow shows that the internal luminosity is 11 $L_{\odot}$, and the region is also externally heated by a radiation field enhanced by a factor of 25 compared to the local standard interstellar field.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.635-653
• /
• 1999

The present work considers work considers research strategies to address global warming. Specifically, this work considers the development of technologies of importance for the reduction of greenhouse gas emission and, especially, the materials that are critical to these technologies. It is argued that novel materials that are essential for the production of environmentally friendly energy may be developed through a special kind of engineering: interface engineering, rather than through classical bulk chemistry. Progress on the interface engineering requires to increase the present state of understanding on the local properties of materials interfaces and interfaces processes. This, consequently, requires coordinated international efforts in order to establish a strong background in the science of materials interfaces. This paper considers the impact of interfaces, such as surfaces and grain boundaries, on the functional properties of materials. This work provides evidence that interfaces exhibit outstanding properties that are not displayed by the bulk phase. It is shown that the local interface chemistry and structure and entirely different than those of the bulk phase. In consequence the transport of both charge and matter along and across interfaces, that is so important for energy conversion, is different than that in the bulk. Despite that the thickness of interfaces is of an order to a nanometer, their impact on materials properties is substantial and, in many cases, controlling. This leads to the conclusion that the development of novel materials with desired properties for specific industrial applications will be possible through controlled interface chemistry. Specifically, this will concern materials of importance for energy conversion and environmental monitoring. Therefore, there is a need to increase the present state of understanding of the local properties of materials interfaces and the relationship between interfaces and the functional properties of materials. In order to accomplish this task coordinated international efforts of specialized research centres are required. These efforts are specifically urgent regarding the development of materials of importance for the reduction of greenhouse gases. Success of research in this area depends critically on financial support that can be provided for projects on materials of importance for a sustainable environment, and these must be considered priorities for all of the global economies. The authors of the present work represent an international research group economies. The authors of the present work represent an international research group that has entered into a collaboration on the development of the materials that are critical for the reduction of greenhouse gas emissions.

• Radiation Oncology Journal
• /
• 제10권2호
• /
• pp.219-225
• /
• 1992

1983년 9월 부터 1986년 10월 까지 37개월 동안에 강남성모병원 치료방사선과에서 50명의 자궁경부암 환자가 완치목적으로 골반부위에 외부방사선치료 빛 자궁강내 방사선치료를 받았다. 외부방사선치료는 4500 cGy/5주에서 5940 cGy/6.5주를 골반부위에 먼저 시행하였고 강내방사선치료를 이어서 시행하였으며, A점에 도달한 총 치료 선량은 6500 cGy에서 l1344 cGy로 평균 6764 cGy였다. 50명의 환자중 1명이 추적조사에서 제외되었으며, 나머지 49명의 환자를 대상으로 3개월에서 93개월 까지 추적조사하였는데, 중간 추적조사 기간은 32개월 이었다. FIGO분류에 따라 병기별로 보면, 1기가 6명($12.2\%$), 2a기가 6명 ($12.2\%$), 2b기가 25명 ($51\%$), 3기가 7명 ($14\%$), 그리고 4기가 5 ($10.2\%$)명 이었다. 환자의 나이는 33세에서 76세까지의 분포를 보였으며(중앙 연령, 60세), 병리조직학적 분류로는 편평상피암이 46명 ($94\%$), 선암이 2명 ($4\%$), 그리고 편평상피선암이 1명 ($2\%$)이었다. 전반적인 반응율은 $84\%$였고, 5년 생존율은 $49\%$였다. (병기별 5년생존율은 1b 기가 $75\%$, 2a기가 $83\%$, 2b 기가 $42.5\%$, 3기가 $25\%$, 4기가 $40\%$였다.) 합병증은 11명($22.4\%$)에서 발생하였고, 직장내 합병증이 가장 흔한 합병증이었으며, 나머지는 사소한 일과성의 자연치유되는 질환들이었다. 생존율과 여러 인자들(나이, 방사선 치료선량, 헤모글로빈치, 골반임파절 전이상태, 전신상태, 그리고 국소 재발유무)과의 관련성에 대해 분석한 바, 나이와 국소재발유무를 제외하고는 모두 통계학적으로 유의하지 않게 나왔으며, 50세 미만의 생존율이 50세이상의 생존율보다 더 나빴고(P<0.05), 국소재발 존재시 생존율이 더 나빴다(p<0.05).

• Radiation Oncology Journal
• /
• 제10권2호
• /
• pp.213-217
• /
• 1992

국소적으로 진행된 자궁경부암(종괴크기가 5 cm이상혹은 FIGO병기 III, IV) 환자에 있어 방사선 치료 단독으로 근치적치료를 시행한 경우 골반내에서 약 50$\%$까지의 높은 재발율이 보고되고 있다. 따라서 이들 환자에 있어서 국소관해율 및 생존율을 증가 시키기 위하여 본 연구에서는 방사선 민감제로서 가장 효과적인 약제로 알려진 cisplatin을 방사선치료와 동시에 투여하는 방사선-화학요법을 시행하였다. 1988년 5월부터 1991년 9월까지 인제대학교 부속 서울백병원치료방사선과에서 자궁경부암으로 진단된 환자중 국소적으로 진행된(FIGO병기 III, IV, 종괴크기가 5 cm이상의 IIb) 환자로서 방사선치료와 cispiatin의 동시병행요법이 시행되었던 12명을 대 상으로 후향적 임상분석을 하였다. 12명의 환자에 대한 치료는 골반부위에 5000 cGy이상 (4980-6480 cGy)의 외부방사선치료및 1회이상의 강내치료가 시행되었고 동시에 cisplatin 50 mg을 1주 간격으로 반복투여하였다. 총 투여횟수는 $3\~7$회로 평균 5회였다. 추적기간은 $3\~53$개월 (중앙값 34개월) 이며, 연령 분포는 $26\~69$세(중앙값 54세) 였다. 병기별 분포는 IIb, III, IV가 각각 5, 3, 4명 이었다. 조직학적 분류상 편평상피세포암이 11명 이었다. 11명의 관찰대상중 완전관해는 7명 ($64\%$), 부분관해는 4명 ($35\%$)에서 이루어졌다. 7명의 완전관해중 6명이 무병상태였다. 관찰종로시의 전체국소관해율은 $73\%$로서 완전관해군은 $100\%$, 부분관해군은 $25\%$,에서 국소관해를 보였다. 병기별 생존분포를 보면 FIGO병기 IIb, III, IV에서 각각 4/4, 2/3, l/3 이었으며 5년생존율은 $61\%$이었다. 사망자는 4명으로 이중 3명은 일차적인 질병으로, 1명은 패혈증으로 사망하였다. 재발환자는 3명으로 국소재발이 1명, 원격전이가 1명, 국소재발과 원격전이가 1명 이었다. 병합치료에 의한 독성을 살펴보면 오심증상이 3명, 식욕부진이 4명, 백혈구감소증이 4명, 그리고 혈소판감소증이 1명에서 관찰되었다. 다른 1명은 치료종료후 패혈증으로 사망하였다. 그 외의 혈액적독성, 신독성의 증상을 나타낸 경우는 없어 cisplatin 추가에 의한 독성은 경미한 것으로 나타났다. 국소적으로 진행된 자궁경부암 환자에서 방사선-화학요법을 동시 병행할 경우 국소관해율이 $100\%$(완전관해율이 $64\%$)이었고 골반내 재발율은 $27\%$, 이었으며 cisplatin추가로 인한 독성은 경미하였다. 이는 대조군과 비교할때 보다 나은 성적으로 예비결과이기는 하나 국소적으로 진행된 자궁경부암환자에서 방사선치료와 cisplatin 동시 병행요법이 국소관해율을 향상시킬 수 있을 것으로 기대된다.

• 대한화학회지
• /
• 제19권2호
• /
• pp.92-97
• /
• 1975

$TiCl(OC_6H_5)_3{\cdot}C_6H_5OH\;및\;Ti(OC_6H_5)_4{\cdot}C_6H_5OH$의 분자량 측정과 전자 흡수스펙트럼을 고찰함으로써 이들 두 유기-리탄 화합물들의 용액 상태에서의 분자 및 전자구조에 대하여 연구하였다. $Ti(OC_6H_5)_4{\cdot}C_6H_5OH$는 고체상태에서는 이합체로 존재하지만 분자량 측정 결과 묽은 용액에서는 단위체로 완전해리되며 $TiCl(OC_6H_5)_3{\cdot}C_6H_5OH$도 8mM농도에서 해리를 시작함을 알수 있었다. 따라서 이들 두 착화합물은 묽은 용액에서 5배위 착화합물로 존재하며 분자구조는 trigonalbipyramid으로 생각된다. 두 화합물의 전자 흡수스펙트럼은 자외부쪽에 똑같은 진동구조를 갖는 벤젠고리 특유의 흡수밴드를 나타내며 가시부에서는 $TiCl(OC_6H_5)_3{\cdot}C_6H_5OH$의 경우 26.8kK에 $Ti(OC_6H_5)_4{\cdot}C_6H_5OH$는 29.6kK에 각각 흡수 밴드를 나타낸다. 이가시부 흡수밴드는 리간드에서 금속쪽으로 전하이전에 의한 $^1A_1''{\to}^1E'\;or\;^1E''$ 전이로 생각된다.

• Structural Engineering and Mechanics
• /
• 제34권6호
• /
• pp.719-738
• /
• 2010

The aim of this paper concerns with the nonlinear analysis of cable-stayed bridges including the vibration effect of cable stays. Two models for the cable stay system are built up in the study. One is the OECS (one element cable system) model in which one single element per cable stay is used and the other is MECS (multi-elements cable system) model, where multi-elements per cable stay are used. A finite element computation procedure has been set up for the nonlinear analysis of such kind of structures. For shape finding of the cable-stayed bridge with MECS model, an efficient computation procedure is presented by using the two-loop iteration method (equilibrium iteration and shape iteration) with help of the catenary function method to discretize each single cable stay. After the convergent initial shape of the bridge is found, further analysis can then be performed. The structural behaviors of cable-stayed bridges influenced by the cable lateral motion will be examined here detailedly, such as the static deflection, the natural frequencies and modes, and the dynamic responses induced by seismic loading. The results show that the MECS model offers the real shape of cable stays in the initial shape, and all the natural frequencies and modes of the bridge including global modes and local modes. The global mode of the bridge consists of coupled girder, tower and cable stays motion and is a coupled mode, while the local mode exhibits only the motion of cable stays and is uncoupled with girder and tower. The OECS model can only offers global mode of tower and girder without any motion of cable stays, because each cable stay is represented by a single straight cable (or truss) element. In the nonlinear seismic analysis, only the MECS model can offer the lateral displacement response of cable stays and the axial force variation in cable stays. The responses of towers and girders of the bridge determined by both OECS- and MECS-models have no great difference.

• The Plant Pathology Journal
• /
• 제21권3호
• /
• pp.262-269
• /
• 2005

An antiviral producing bacterial strain was isolated from a ginseng rhizosphere in Kangwon province of Republic of Korea. In order to identify the bacterial strain, microbiological, physiological and biochemical tests were performed, along with RAPD, 16S rRNA, 16S-23S rRNA ITS (intergenic spacer region) and DNA-DNA hybridization analyses. The bacterium was found to be a strain of Pseudomonas fluorescens, which was designated as Gpf01. The strain was grown in Muller-Hinton (MH) broth, and the culture supernatant obtained was filtered through a $0.45{\mu}l$ filter. It was further boiled at $100^{\circ}C$ and tested in two experiments for its ability to control a yellow strain of Cucumber mosaic virus (CMV-Y). In the first experiment, boiled culture filtrate (RCF) was treated on one half of the leaves of Chenopodium amaranticolor followed by CMV- Y inoculation on both halves. In the second experiment, BCF was treated on the lower leaves of Nicotiana tobacum var. Xanthi-nc, with the CMV-Y mechanically inoculated onto the upper untreated leaves. In the first experiment, BCF treatment was able to considerably reduce the number of viral lesion, and in the second experiment, plants treated with BCF showed no visible viral symptoms compared to the Muller-Hinton (MH) media treated controls 15 days post inoculation (dpi), and remained symptomless throughout the study period. Thus, Gpf01, identified as P. fluorescence, was able to produce an antiviral component in the culture filtrate, which was found to be heat stable, non-phytotoxic and effective in local as well as systemic hosts of CMV.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권9호
• /
• pp.1253-1259
• /
• 2001

Three cassava varieties, namely MM 92 (MM), Black Twig (BT) and Local (LC), were arranged in a randomized complete block design to evaluate their dry fodder and crude protein (CP) productivity as well as growth persistency. Cassava plants grown in small plots of $5m{\times}10m$ at a planting distance of $25cm{\times}25cm$ were harvested every 6 weeks starting from 3 months after planting. Dry fodder yields of MM, BT and LC over the 8 harvests were 8.55, 8.01 and 6.15 t/ha, respectively. All varieties produced more leaves than stems with average leaf:stem ratios of 5, 5.9 and 4.8 for MM, BT and LC, respectively. In terms of CP production, MM was the highest yielder (272 kg/ha/harvest), followed by BT and LC (238 and 184 kg/ha/harvest, respectively). The total accumulative CP amounts over the 8 harvests were 2179, 1903 and 1474 kg/ha for MM, BT and LC, respectively. The mortality rates were 9.91, 14.01 and 13.98% for MM, BT and LC, respectively. Phosphorus content was more stable than potassium content during defoliation. MM, BT and LC had whole plant phosphorus contents of 0.41, 0.41 and 0.39%, respectively; whole plant potassium contents were 1.25, 1.38 and 1.20%.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.331-337
• /
• 2010

This study compared the macro and micro electrochemical characteristics at the local area of welding metal on dissimilar welding parts for type 304 stainless steel (SS) and type 316L SS. The materials are used for double wall gas pipe of duel fuel engine for a ship. The various potentiodynamic experiments were performed several times in 10% ${H_2C_2O_2}{\cdot}{H_2O}$ solution using macro and micro methods, respectively. The micro electrochemical experiments conducted to resolve at local area on cross-section of dissimilar welding materials by micro-droplet cell device. The micro-droplet cell techniques can be used almost electrochemical experiments to resolve corrosion characteristics of the limited electrode area of the metallic surface between wetted spot of working electrode and tip of sharpened capillary tube. The results of macro electrochemical experiments show that resistance of active dissolution reaction at welding zone was high due to low current density by formation of passivation protection film at passive region. According to the micro electrochemical experiment, the corrosion current density of welding zone and bond zone were relatively high.