• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.651-657
• /
• 2010

Even though local governments are committed to the landscape management aiming to enhance the quality of the urban and natural landscape, the results are not satisfactory since the landscape plan is performed through the "routine" process, on which the planning system is based. Many local governments had spent much in making their landscape plans, but these plans were evaluated not so much "useful" in the practical sense. The objective of the study, which aims to systematically readjust the existing landscape management system of Korea, is to analyse the landscape plans of the few local governments, which are categorized in two level - upper and low local government. The analysis of landscape plan is performed in terms of four factors: The composed structure, the objects of the plan, the effectiveness of the landscapeindicators and guidelines and the institutional system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.125-132
• /
• 2019

Because the water exposed to shock waves caused by an underwater explosion cannot withstand the appreciable tension induced by the change in both pressure and velocity, the surrounding water is cavitated. This cavitating water changes the transferring circumstance of the shock loading. Three phenomena contribute to hull-plate damage; initial shock loading and its interaction with the hull plate, local cavitation, and local cavitation closure then shock reloading. Because the main concern of this paper is local cavitation due to a near-field underwater explosion, the water surface and the waves reflected from the sea bottom were not considered. A set of governing equations for the structure and the fluid were derived. A simple one-dimensional infinite plate problem was considered to verify this uncoupled solution approach compared with the analytic solution, which is well known in this area of interest. The uncoupled solution approach herein would be useful for obtaining a relatively high level of accuracy despite its simplicity and high computational efficiency compared to the conventional coupled method. This paper will help improve the understanding of fluid-structure interaction phenomena and provide a schematic explanation of the practical problem.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.149-158
• /
• 2000

After measuring actual stress by two measurements(Dynamic Strain Meter, Histogram Recorder) on truss rail road bridge, we could perform time history analysis by 3-D beam element method on modelling bridge. And then, after analyzing bridge structure in static by 3-D modelling, we estimated degree of fatigue damage in main member, secondary member of tie zone, cutting area of base metal cross section for confirming the result. In case that the simulated stress is carried out on modeling bridge, most of those simulation mainly is performed by main members. But in real bridge fatigue damage problems generally caused by junctions, connections, joints in which especially local stress is activated. Therefore, in this paper actual stress on critical area was estimated through the analysis result by simulation. With this study, we can estimate the degree of fatigue damage from a safety point of view and comparative accuracy.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.479-484
• /
• 2002

In this paper consisted of three steps for the research The first, The Database of Biological Resource Information are constructing for species Information and Content Information of based XML. The second, The item of defined from the analysts and must be considered for national GSD(Global Species Database), Supply and Contracture of Input System of based Component for the Efficient Local Information Database. The third Information Service and Interoperability are using the GRM(Global Road Map) of based DADI. These are able to accomplish to Contracture for Database and Service structure of Biological Resources Information.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.7
• /
• pp.898-904
• /
• 2014

The stability of Bacillus licheniformis alpha-amylase (BLA) under acid condition was enhanced through direct evolution using the error-prone polymerase chain reaction. One beneficial mutation site, H281I, was obtained in BLA. The specific activity of H281I was 161/352 U/mg, which was 62.6/27.5% higher than that of the wild-type (WT) (99/276 U/mg) at pH 4.5/6.5 and $95^{\circ}C$. The pH optimum for H281I was decreased about 1 unit, whereas no significant changes of optimum temperature and thermostability were observed compared with the wild type (WT). The $k_{cat}/K_m$ value of H281I was 1.7-/1.4-fold higher at pH 4.5/6.5, respectively, than that of WT. The structure model analysis indicated that the H281I mutation altered the predicted interaction between the amino acid residues at 281 and 273, thus creating a conducive local environment for substrate binding, as reflected by its decreased $K_m$, and consequently increased the specific activity.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.34-40
• /
• 2003

This paper considers a TMN-based management system for the management of public ATM switching networks using a four-level hierarchical structure consisting of one network management system, several element management systems, and several agent-ATM switch pairs. Using Jackson's queuing model, we analyze the effects of one TMN command on the performance of the component ATM switch in processing local calls. The TMN command considered is the permanent virtual call connection. We analyze four performance measures of ATM switches- utilization, mean queue length and mean waiting time for the processor directly interfacing with the subscriber lines and trunks, and the call setup delay of the ATM switch- and compare the results with those from Jackson's queuing model.

• Korean Security Journal
• /
• no.3
• /
• pp.117-144
• /
• 2000

Not only has there been movement along the sectoral continuum, Johnston argues, but changes in the spatial balance of policing are also visible. More concretely, he suggests that British policing has been undergoing a century-long process that has gathered pace since the 1960s. Three factors have been central to this process. First, legislative centralization brought about by the Police Act 1964 - which established the tripartite structure for police governance and amalgamated forces - and the Local Government Act 1972 which reorganized local government. Secondly, the political and industrial unrest of the 1970s and early 1980s led to the establishment of new levels of national police co-operation and, in the words of one author, to the establishment of a 'de facto national police force'. Thirdly, increasing European influence has further internationalized police co-operation and organization. Johnston concludes that the spatial restructuring that appears to be taking place in British policing is indicative of a broader process of fragmentation of social structures and systems for maintaining order.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.181-193
• /
• 2019

The regional economy growth of Jeju has seen higher than national growth since 2011 by the establishment of Jeju Special Self-Governing Province and the increase of incoming population, but its economic growth has slowed after 2016. This study conducted the dynamic shift-share analysis using the production and employees of each industry from 2010 to 2016, targeting Jeju with many factors of regional economic change. In the results of empirical analysis, the regional economy of Jeju was not the industrial structure depending on the national growth, but the industrial structure by the competitiveness and industrial structure of Jeju region. The industries having positive(+) effects of industrial mix effect and competitive effect on the production and the number of employees were the electricity/gas/heavy equipments & waterworks, construction, accommodation & restaurants, and service industry. These industries have positive effects on the regional industry of Jeju. The above-mentioned industries are not only more likely to grow than other regions, but also to drive the local economy of Jeju. In order for these industries to continuously contribute to the regional economy of Jeju, it would be necessary to have the policy/institutional support in the long-term perspective.

• Industrial Engineering and Management Systems
• /
• v.10 no.4
• /
• pp.272-278
• /
• 2011

Decision tree as a classification tool is being used successfully in many areas such as medical diagnosis, customer churn prediction, signal detection and so on. The main advantage of decision tree classifiers is their capability to break down a complex structure into a collection of simpler structures, thus providing a solution that is easy to interpret. Since decision tree is a top-down algorithm using a divide and conquer induction process, there is a risk of reaching a local optimal solution. This paper proposes a procedure of optimally determining thresholds of the chosen variables for a decision tree using an adaptive particle swarm optimization (APSO). The proposed algorithm consists of two phases. First, we construct a decision tree and choose the relevant variables. Second, we find the optimum thresholds simultaneously using an APSO for those selected variables. To validate the proposed algorithm, several artificial and real datasets are used. We compare our results with the original CART results and show that the proposed algorithm is promising for improving prediction accuracy.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.8
• /
• pp.93-98
• /
• 2022

Adiabatic blanking is a method to improve productivity through an autocatalytic cycle that occurs repeatedly through plastic deformation and thermal softening caused by impact energy. In this study, an axisymmetric analysis model comprising a punch, die, holder, and specimen was developed to confirm the temperature and deformation characteristics caused by an impact load. Through this, the impact energy, diameter of the punch, gap between the punch and die, and the effect of the fillet were analyzed. Because this process occurs in a very short time, adiabatic analysis can be performed using the explicit time-integration method. The analysis, confirmed that it is necessary to design a structure capable of increasing the local temperature and plastic deformation by controlling the impact energy, working area, gap, and the fillet.