• 천문학회보
• /
• 제39권1호
• /
• pp.44.2-44.2
• /
• 2014

We investigate the influence of neighboring galaxies as a component of the local environment. Based on the SDSS data release 7 and the KIAS value-added galaxy catalog, we have constructed a galaxy pair catalog by matching each galaxy with its nearest and its most tidally-influential neighbor. In particular, we examine the star formation rate (SFR) derived from their optical u-r color and $H{\alpha}$ emission as functions of neighbor's distance, tidal force, and morphological type. The results are as follows. (1) The $H{\alpha}$-based SFR of galaxies with close companions is enhanced by up to a factor of three regardless of neighbor's morphology, when compared to isolated counterparts. (2) The mean u-r color of galaxies along with early-type galaxies is redder than that of isolated ones, yet bluer with late-types. (3) The galaxies with late-type companions mostly show higher SFR than those with early-types. The results suggest that the role played by neighboring galaxies are two-fold; (a) the tidal effect on the shorter scale of time and of distance, and (b) the hydrodynamic effect on the longer scale.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3730-3734
• /
• 2011

The degree of self-assembly and the size variation of nanotubular structures in anodic titanium oxide prepared by the anodization of titanium in ethylene glycol containing 0.25 wt % $NH_4F$ at 40 V were investigated as a function of anodization time. We found that the degree of self-assembly and the size of the nanotubes were strongly dependent on thickness deviation and thus indirectly on anodization time, as the thickness deviation was caused by the dissolution of the topmost tubular structures at local areas during long anodization. A large deviation in thickness led to a large deviation in the size and number of nanotubes per unit area. The dissolution primarily occurred at the bottoms of the nanotubes ($D_{bottom}$) in the initial stage of anodization (up to 6 h), which led to the growth of nanotubes. Dissolution at the tops ($D_{top}$) was accompanied by $D_{bottom}$ after the formed structures contacted the electrolyte after 12 h, generating the thickness deviation. After extremely long anodization (here, 70 h), $D_{top}$ was the dominant mode due to increase in pH, meaning that there was insufficient driving force to overcome the size distribution of nanotubes at the bottom. Thus, the nanotube array became disorder in this regime.

• 경영과정보연구
• /
• 제25권
• /
• pp.387-405
• /
• 2008

Vietnam is gaining much attention as an attractive emerging market that can replace BRICs for the corporations who are destined to always look for a new market in order to secure competitive powers in the global market. The reason for Vietnam's becoming an attractive place for production is that much uncertainty has been found in China, which has been the traditional country that absorbed the most amount of capital investment. Also, the favorable conditions of Vietnam market itself and the environmental changes such as the open-door policy of Vietnam government attract the investment of Korean companies, and Korea currently holds the most amount of cumulative investments in Vietnam. However, it is necessary to remember that Vietnam is still a socialist nation, and many required components for corporate activities are not sufficiently provided in Vietnam market. Also, many unstable environmental factors exist such as the lack of infrastructure, the lack of many required institutions, the prevalent corruption, the excessive processing time and cost for adjusting the investment, the lack of advanced work force, and the underdevelopment of part and material industry. Therefore, those companies who are planning to invest in Vietnam should take a long-term perspective in planning the investment strategies, carry out a detailed market investigation and analysis in advance, diversify the investment areas and investment sectors, carefully make a joint venture and management, carefully determine the factory location, establish a local agency, make co-investments with the part suppliers, etc.

• 디지털콘텐츠학회 논문지
• /
• 제18권5호
• /
• pp.889-894
• /
• 2017

본 논문은 방목형 축산관리의 효율성을 극대화하기 위해 무인비행체 기반의 자동항법과 근거리무선통신망 기술, 자동이착륙 시스템을 및 개체관리 운영 앱을 통하여 스마트팜 구현에 목적이 있다. 산지생태축산 활성화를 위하여 축산 ICT 융합 기술을 접목한 방목 목장 관리 시스템은 방목 가축의 생산성 향상과 우수품질을 생산하는 인프라 조성과 FTA에 대응하는 축산 경쟁력 확보에 기여할 것으로 예상된다. 축산업에 종사하는 부족한 인력을 대체하는 기술로 농가에 보급을 통해 경쟁력 향상에 기여할 것이다.

• Wind and Structures
• /
• 제22권5호
• /
• pp.573-594
• /
• 2016

Simultaneous pressure measurements on 2D square prisms with various corner modifications were performed in uniform flow with low turbulence level, and the testing Reynolds numbers varied from $1.0{\times}10^5$ to $4.8{\times}10^5$. Experimental models were a square prism, three chamfered-corner square prisms (B/D=5%, 10%, and 15%, where B is the chamfered corner dimension and D is the cross-sectional dimension), and six rounded-corner square prisms (R/D =5%, 10%, 15%, 20%, 30%, and 40%, where R is the corner radius). Experimental results of drag coefficients, wind pressure distributions, power spectra of aerodynamic force coefficients, and Strouhal numbers are presented. Ten models are divided into various categories according to the variations of mean drag coefficients with Reynolds number. The mean drag coefficients of models with $B/D{\leq}15%$ and $R/D{\leq}15%$ are unaffected by the Reynolds number. On the contrary, the mean drag coefficients of models with R/D=20%, 30%, and 40% are obviously dependent on Reynolds number. Wind pressure distributions around each model are analyzed according to the categorized results.The influence mechanisms of corner modifications on the aerodynamic characteristics of the square prism are revealed from the perspective of flow around the model, which can be obtained by analyzing the local pressures acting on the model surface.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.77-82
• /
• 1992

FZ법에 의한 결정성장에 있어서 용융대는 고액 계면의 장력에 의해 유지되고 상.하부의 고체봉 사이에 위치하고 있다. 따라서, 용융대의 표면에서는 온도와 농도 차이에 의해 표면장력의 구배가 발생하고 있는 marangoni 대류의 구동력으로 작용한다. 본 연구에서 정상상태의 결정성장시는 결정의 가장자리 영역에서의 Solute 농도는 결정내부 보다도 높아지게 되고 전위의 분포도 불규칙하여 지며, void나 기포 침투, Secondary phase의 생성 및 미소균열등의 결함 발생 확률이 계면부근에서 높아지는 결과를 알 수 있었다. 이는 고액성장 계면이 marangoni 대류에 의하여 이 영역에서 온도의 국부적인 변동에 의해 불규칙하여 지게 되기 때문이라 사료된다.

• 전산구조공학
• /
• 제7권4호
• /
• pp.69-83
• /
• 1994

평면 뼈대구조물의 매우 큰 변형에 대하여 정확한 비선형 유한요소의 정식화 과정을 나타내었다. 유한요소의 구성은 변화되는 재료의 기준 물성치에 근거를 두고 형성하였으며 매우 큰 변형을 받는 재료의 성질을 명확하게 특정지어 진응력-변형율 관계식을 직접 적용할 수 있도록 하였다. 큰회전과 작은 변형율을 받는 문제들을 형성하기 위하여 Co-rotation 접근 방법을 사용하였다. 큰 변형을 일으키는 요소의 문제를 해결하기 위하여 직선보 형태의 유한요소를 사용하였으며 개개의 유한요소의 정식화는 축방향력의 영향을 고려하여 미소 처짐보이론을 바탕으로 형성하였다. 본 연구에서 형성된 큰 변형에 대한 비선형 유한요소의 타당성을 확인하기 위해 몇몇 수치해들을 해석하고 검토하였다.

• 재활복지공학회논문지
• /
• 제10권3호
• /
• pp.229-236
• /
• 2016

자기 센서와 액추에이터는 산업과 의료 분야에서 광범위하게 사용되고 있다. 센서와 액추에이터의 기반의 통합시스템은 기계 및 전자 기기들의 일반적인 조합으로써 메카트로닉스로 정의된다. 최근에 자기 무선 센서와 액추에이터가 개발되어지고, 다양한 분야에서 사용되고 있다. 특히 이 메커니즘은 자성 물질 및 물리적 현상에 관한 것으로 자기의 세기의 따라 달라진다. 그러나 이들 연구의 경계는 명확하지 않다. 따라서, 자기 마이크로 로봇, 자기액추에이터 및 센서들을 포함한 새롭고 정확한 정의가 필요하다. 본 연구에서는 의공학 및 재활을 위한 자기 메카트로닉스의 진보되고 확장된 개념을 혈관 재활을 위한 무선 펌프 시스템과 모션 감지 시스템을 중심으로 소개하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.86-91
• /
• 2005

The stack, the core unit of the MCFC system, is composed of the three main parts which are the electrodes, the matrix keeping the electrolyte and the separator. Among these, the separator made of low carbon steel is manufactured by some sheet metal forming processes. The flatness of flange of the mask plate of the separator is crucial not only to enhance the stack performance but also to reduce the production cost. This study has focused on the enhancement of flatness of the mask plate flange by controlling some process parameters like the punch and die comer radii, the blank holding force, the friction coefficient and so on. The springback phenomenon occurring in the flange drawing process has been studied first using the finite element method (FEM) in order to understand what causes the springback. The distribution pattern of local longitudinal stress in the flanged part has been revealed very important in predicting the final shape of the flange. This fact has been backed up by the experimental results carried out with the developed test dies.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.144.1-144.1
• /
• 2013

Recently, we have developed the local oxidization and hydrogenization method for graphene layer using atomic force microscope(AFM) tip at room temperature and ambient pressure. With this method we could create locally oxidized or hydrogenized area on the graphene layer with various size from nanometer to micrometer scale, by controlling the amplitude and polarity of the voltage supplied between conducting AFM tip and the graphene layer. We investigated the chemical states of functionalized C atoms in the graphene layer using scanning photoelectron microscopy. By measuring C 1s core level X-ray Photoemission Spectra of the C atoms and suitable fitting process carried on the measured spectra, we could obtain the fraction of oxidization and hydrogenization under various condition, and the evolution of each chemical state during thermal annealing process.