• 한국수산과학회지
• /
• 제37권4호
• /
• pp.330-336
• /
• 2004

To meet the increasing demand from various fishing fields for training of fishing equipment operators, a fishing winch simulator was designed to train maritime students in the correct and safe operation of hydraulic winches under various load conditions related to fishing operations. The aim of this study is to describe the basic dynamic characteristics of the newly developed hydraulic fishing winch simulator and particularly to analyze the mechanical responses produced on the winch operation controls. The winch simulator consists of two winch units, a computer control and data acquisition system, a control consol and other associated mechanisms. When one winch is in hauling mode, the other one will always be in loading mode. The revolution speed of the hauling winch was controlled by a proportional directional control valve, and the braking torque of the loading winch was controlled by a proportional pressure control valve. The simulation experiments indicated that the dynamic characteristics of the hauling winch followed the braking response characteristics of the loading winch. The tests also showed that the warp speed and tension linearly depend on the pressure differential across the motor of the loading winch controlled by operating the proportional pressure control valve during the hauling operation. The experience gained from various training courses showed that the fishing winch simulator was very realistic and it was valuable for training novice winch operators. The results of the winch simulation exercise were recorded and used to evaluate the training on the operation and handling of the winch system. From these test results, we concluded that the tension acting on the warp during hauling operations can successfully be simulated by controlling the pressure differential across the motor with step changes of the control input signal to the proportional pressure control valve of the loading winch.

• 수산해양기술연구
• /
• 제36권1호
• /
• pp.12-24
• /
• 2000

The electro-hydraulic servo winch system built in a automatic tension control equipment was designed with a latent need for an advanced system in fishing operations of the inshore and coastal fishing vessels. In order to keep the constant tension condition of warp under loading, a tension control circuit was added to the servo winch system.The dynamic performance in the open loop behaviour of the designed winch system was investigated and its applicability was tested for various possibilities of load using a load generator especially developed in order to this study.The mechanical characteristics of this system is different from that of a conventional type, that is, the tension, length, line speed and drum revolution can be automatically controlled by the information from various sensors, such as torque, rpm and pressure transducers. from the experiment results, it was verified that the servo winch system has very good output and tracking behaviour for the control input signals in different operating conditions though overshoot of out 8% in the transient characteristics of torque under the load though a overshoot of about 8% in the transient characteristics of torque under the load condition can be observed when the opening of servo valve, adjustable by the input voltage between - 10 V up to 10 V, changed suddenly.Consequently, the improved fishing winch system can be effectively used as the automatic shooting and hauling equipment of low cost for small inshore and coastal fishing vessels which engage in net fishing.

• Ocean Systems Engineering
• /
• 제1권2호
• /
• pp.157-169
• /
• 2011

To provide more rational design solutions at conceptual design level, axiomatic design method has been applied to solve critical part of a new engineering problem called Mobile Harbor. In the implementation, the Mobile Harbor, a functional harbor system that consists of a vessel with container crane approaches to a container ship anchored in the open sea and establishes a secure mooring between the two vessels to carry out loading and unloading of containers. For this moving harbor system to be able to operate successfully, a reliable and safe strategy to moor and maintain constant distance between the two vessels in winds and waves is required. The design process of automatic ship-to-ship mooring system to satisfy the requirements of establishing and maintaining secure mooring has been managed using axiomatic design principles. Properly defining and disseminating Functional Requirements, clarifying interface requirements between its subsystems, and identifying potential conflict, i.e. functional coupling, at the earliest stage of design as much as possible are all part of what need to be managed in a system design project. In this paper, we discuss the automatic docking system design project under the umbrella of KAIST mobile harbor project to illustrate how the Axiomatic Design process can facilitate design projects for a large and complex engineering system. The solidified design is presented as a result.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.73-80
• /
• 2019

본 논문은 기존 5ton 카고 트럭의 적재함을 개조하여 농기계의 상, 하차를 손쉽게 할 수 있도록 하는 전동 유압 슬라이딩 데크를 개발하기 위하여 전동 유압 슬라이딩 데크 시스템의 기본 설계를 수행하였고, 기구학적 해석을 통하여 슬라이딩 데크의 길이와 구조를 고안 하였으며, 구조해석을 통하여 안전성과 경제성을 고려한 재질을 선정하였다. 먼저 슬라이딩 데크 시스템의 기본 설계를 위하여 운송 대상 농기계를 조사하였고, 필요한 요소들을 선정하였다. 선정한 요소들을 충족시킬 수 있는 유압실린더를 이용한 시스템을 고안하였다. 단순화 모델링과 기구학적 다이어그램을 통하여 슬라이딩 데크 시스템의 작동 구조를 파악하였으며, 기구학 해석을 통해 슬라이딩 데크의 최소길이와 그 구조를 고안하였다. 안전성과 경제성을 모두 만족하는 재질을 선정하기 위하여, 자동차 구조물에 사용되는 대표적인 4가지 재질을 선정하였다. 해석이 필요한 부분을 선정하고, 단순화 모델링을 통해 최대하중을 받는 조건에서 재질에 따른 응력과 변형량을 비교하였다. 그 결과 SS41P 재질사용하면 단가를 줄이고 안전성을 만족하는 결과를 얻을 수 있었다. 작동이 불가능한 농기계의 상, 하차를 위하여 윈치 시스템을 설계하고 적용하였다.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.154-164
• /
• 2011

본 연구는 우리나라 험준한 급경사 지형의 단목중심의 목재생산시스템 등에 적합하고 사방사업, 임도사업 등의 다양한 산림작업에 유용하게 활용할 수 있는 다목적의 반궤도식 산림작업차 개발을 목적으로 실시하였다. 산림작업차량의 기본 차체는 최소회전반경 설계기준과 작업도 폭을 고려하여 차체프레임부의 총길이는 5,750 mm, 차체의 폭은 1,900 mm, 적재부의 적재용량은 약 $2.5m^{3}$으로 설계 제작하였다. 동력원은 3,400 rpm의 최대 96마력 출력의 엔진을 선정하였으며, 유압펌프는 2개의 주펌프와 2개의 보조펌프로 나누어 선정하고, 주펌프는 전후좌우 4개의 주행용 유압모터에 사용하고, 보조펌프는 각종 작업기에 사용하도록 설계 제작하였다. 동력전달방식은 HST(Hydro-Static Transmission) 시스템을 적용하였고, 주행부는 조향가능한 전방 고무바퀴와 무한 궤도형으로 회전하는 후방 크롤러로 설계 제작하고, 조향방식은 애커만 조향방식을 채택하였다. 주행조작부는 일반 자동차의 운전 및 운전석 형태로 설계 제작하였으며, 보조장치로 윈치와 로그그래플 및 아웃트리거를 장착하였다. 시작기의 공차시 임도의 주행속도는 저속 5.3 km/hr, 고속 7.7 km/hr로 나타났다.