• Title/Summary/Keyword: Load reduction

검색결과 2,338건 처리시간 0.034초

Web crippling strength of cold-formed stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition

  • Yousefi, Amir M.;Lim, James B.P.;Uzzaman, Asraf;Lian, Ying;Clifton, G. Charles;Young, Ben
    • Steel and Composite Structures
    • /
    • 제21권3호
    • /
    • pp.629-659
    • /
    • 2016
  • In cold-formed stainless steel lipped channel-sections, web openings are becoming increasingly popular. Such openings, however, result in the sections becoming more susceptible to web crippling, especially under concentrated loads applied near the web opening. This paper presents the results of a finite element parametric study into the effect of circular web openings on the web crippling strength of cold-formed stainless steel lipped channel-sections for the interior-one-flange (IOF) loading condition. This involves a bearing load applied to the top flange of a length of member, away from the end supports. The cases of web openings located centred beneath the bearing load (i.e. beneath the bearing plate delivering the load) and offset to the bearing plate, are considered. Three grades of stainless steel are considered: duplex EN1.4462, austenitic EN1.4404 and ferretic EN1.4003. In total, 2218 finite element models were analyzed. From the results of the parametric study, strength reduction factors for load bearing capacity are determined, where these reduction factors are applied to the bearing capacity calculated for a web without openings, to take account the influence of the web openings. The strength reduction factors are first compared to equations recently proposed for cold-formed carbon steel lipped channel-sections. It is shown that for the case of the duplex grade, the strength reduction factor equations for cold-formed carbon steel are conservative but only by 2%. However, for the cases of the austentic and ferritic grades, the cold-formed carbon steel equations are around 9% conservative. New strength reduction factor equations are proposed for all three stainless steel grades.

전기요금 절감용 ESS를 활용한 Particle Swarm Optimization 기반 Peak Shaving 제어 방법 (Particle Swarm Optimization-Based Peak Shaving Scheme Using ESS for Reducing Electricity Tariff)

  • 박명우;강모세;윤용운;홍선리;배국열;백종복
    • 전기전자학회논문지
    • /
    • 제25권2호
    • /
    • pp.388-398
    • /
    • 2021
  • 본 논문에서는 전기요금 절감용 ESS를 활용한 Particle swarm optimization(PSO) 기반 Peak shaving 제어 방법을 제안한다. 제안한 방식은 실제 부하와 예상되는 부하의 소비를 비교하여 피크 절감을 위해 ESS의 추가 유효전력값을 계산하여 입력을 더한다. 또한 추가로 증가시킨 유효전력을 보상하기 위해, 유효전력을 할당하는 과정을 수행하며 유효전력 할당치가 피크 부하에 영향을 주지 않도록 유효전력 할당 지점에 예상되는 부하의 평균을 최소화하는 최적화 해를 PSO를 통해 찾는다. 제안한 방식의 성능 검증을 위해 실제 부하 데이터와 예측 알고리즘을 반영하여 예측 오차가 적은 경우와 큰 경우의 사례 연구를 수행하였다. 사례 연구 수행 결과 제안한 방식을 전기요금 절감을 위한 충·방전 제어 방식과 같이 수행한 경우 예측 오차가 큰 경우에도 성공적으로 피크 부하 절감을 수행하였으며, 17.8%의 피크 부하 절감 효과와 6.02%의 전기요금 절감 효과를 보였다.

Effect of corner modifications on 'Y' plan shaped tall building under wind load

  • Sanyal, Prasenjit;Dalui, Sujit Kumar
    • Wind and Structures
    • /
    • 제30권3호
    • /
    • pp.245-260
    • /
    • 2020
  • Wind load and responses are the major factors which govern the design norms of tall buildings. Corner modification is one of the most commonly used minor shape modification measure which significantly reduces the wind load and responses. This study presents a comparison of wind load and pressure distribution on different corner modified (chamfered and rounded) Y plan shaped buildings. The numerical study is done by ANSYS CFX. Two turbulence models, k-epsilon and Shear Stress Transport (SST), are used in the simulation of the building and the data are compared with the previous experimental results in a similar flow condition. The variation of the flow patterns, distribution of pressure over the surfaces, force and moment coefficients are evaluated and the results are represented graphically to understand the extent of nonconformities due to corner modifications. Rounded corner shape is proving out to be more efficient in comparing to chamfered corner for wind load reduction. The maximum reduction in the maximum force and moment coefficient is about 21.1% and 19.2% for 50% rounded corner cut.

2-Arch 터널의 중앙벽체에 작용하는 하중산정 (The Evaluation of the Loads Acting on the Pillar in Two-Arch Tunnel)

  • 도종남;오규철;천병식
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1774-1781
    • /
    • 2007
  • In this study, Matsuda's formula, which has been used to evaluate the acting load on the concrete pillar in 2-Arch tunnels, is investigated and a load reduction factor $({\alpha})$, which has been estimated from numerical parametric studies, is proposed for a better design of 2-Arch tunnels in the future. Numerical parametric studies show that the concrete pillar is subjected to a stress concentration on the excavation side during the first tunnel driving and when tunnel excavation is completed, the induced stress on the pillar in a poor quality of ground condition is 1.5 to 1.8 times the stress developed during the first tunnel driving. In addition, the numerical studies indicate that the acting load on the pillar is in the range of $14{\sim}83%$ of the load estimated by Matsuda's formula. From these results, a load reduction factor $({\alpha})$ is determined and it would make 2-Arch tunnel design more economically.

  • PDF

수요반응자원으로서 산업용 부하의 매집 우선순위 결정 기준에 관한 연구 (A Study on Decision-making Criteria in Industrial Sector for Electric Load Aggregation)

  • 김성열;김동민
    • 전기학회논문지
    • /
    • 제65권6호
    • /
    • pp.946-954
    • /
    • 2016
  • Energy industry is undergoing a paradigm shift in customer participation in the smartgrid. Customers traditionally consume electrical power. But nowadays not only do they generate electricity from private distributed generations, they can participate in demand response programs with their negawatt power which means a theoretical unit of power representing an amount of energy saved. Therefore development of decision-making criteria for electric load aggregation becomes a greater consideration as an amount of energy saved from demand response resources increases. This paper proposes load aggregators' decision-making criteria in the industrial sector where it made up the largest portion in demand response portfolio in order to assure reliability performance for demand response resources.

지자체간 협조를 통한 하천수질관리 비용절감 방안: 영산강을 대상으로 (Cost Reduction Measure for River Water Quality Management by Cooperation between Local Governments:a Case of the Youngsan River)

  • 여규동;조은희;정영훈;이충성
    • 대한토목학회논문집
    • /
    • 제32권5B호
    • /
    • pp.273-285
    • /
    • 2012
  • 현행 수질오염총량관리제는 원인자부담원칙를 기본으로 설정된 단위유역별 지자체별 할당부하량을 해당 지자체가 개별적으로 대처하도록 하고 있다. 그러나 하천으로 유입되는 수질오염물은 공기오염물과 달리 상류에서 하류로 일방적으로 흐르고, 하나의 하천에 다수의 지자체가 연관이 되어 있으며, 일반적인 하수처리시설은 '규모의 경제'를 따르는 시설물임을 감안한다면 지자체간 협조를 통해 수질관리비용을 절감할 수 있다. 본 연구는 유역 전체의 관점에서 비용효과를 가질 수 있도록 삭감량을 재배분함으로써 수질관리비용을 절감하는 방법을 제시하였다. 이를 위해 영산강 유역을 대상으로 현재 단위유역별 지자체별로 할당된 계획삭감량을 총량의 증감없이 오염원이 집중된 지역으로 재배분하여 발생하는 수질개선 효과와 비용절감 효과를 분석하였다. 분석결과, 기존 계획에 의한 영산강 유역 전체의 비용은 787,575.0 백만원이며, 시나리오-1과 2는 각각 123,671.8 백만원, 171,433.5 백만원의 비용이 절감되었다. 본 연구는 오염총량관리제를 준수하기 위한 지자체의 수질관리 비용을 절감하는 방안으로서 사례가 될 것으로 기대된다.

포장궤도에서의 저탄성패드 적용에 따른 전달하중 저감 효과 (Transferred Load Reduction effect on Paved Track Roadbed with Low Elastic Base Plate Pad)

  • 이일화;김은;김창환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.1230-1235
    • /
    • 2011
  • The track stiffness is determined by the pad stiffness. Low elastic pad is the most effective track component on the basis of stress-displacement characteristics, dynamic response and fatigue characteristics. It is more important in case of concrete track. The main objective of this paper is to confirm the reduction effect of train load, which transfer to roadbed through track. To achieve this object, numerical analysis and real scale repeated loading test was performed. The load reduction effect of low elastic pad was analyzed by using displacement, stress and strain ratio of the paved track at each point.

  • PDF

지역특성을 고려한 수질오염총량관리 안전부하량 적용 (Application of Margin of Safety Considering Regional Characteristics for the Management of Total Maximum Daily Loads)

  • 박준대;오승영;김용석
    • 한국물환경학회지
    • /
    • 제30권3호
    • /
    • pp.351-360
    • /
    • 2014
  • The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

텔레메틱스 기반의 통화음질향상을 위한 잡음제거 알고리즘의 성능비교 (Performance Comparison of Noise Reduction Algorithms for Enhancing Voice Quality based on Telematics)

  • 김형국;최홍재
    • 한국ITS학회 논문지
    • /
    • 제11권1호
    • /
    • pp.86-91
    • /
    • 2012
  • 다양한 잡음환경에 노출되는 텔레메틱스 기반의 음성 통화 시스템에서 고품질의 통화 품질을 제공하기 위해서는 저연산량을 가지며 효과적으로 배경 잡음을 제거할 수 있는 잡음제거 알고리즘이 요구된다. 본 논문에서는 Mel-Filter 기반의 잡음제거 알고리즘을 제안하며, 제안된 알고리즘을 기존 잡음제거 알고리즘들과 비교하여 설명한다. 자동차 잡음과 배블 잡음 환경에서 잡음제거 알고리즘의 성능 측정 결과, 제안된 Mel-Filter 기반의 잡음제거 알고리즘이 기존 잡음제거 알고리즘들에 비해 비슷한 PESQ 성능에 적은 연산량을 가지는 장점을 가지고 있으며, 제안된 잡음제거 알고리즘이 텔레메틱스 단말기에서 효과적으로 잡음을 제거할 수 있음을 입증하였다.

물량저감 철근상세를 갖는 중공 철근콘크리트 교각 시스템: I. 개발 및 검증 (Hollow Reinforced Concrete Bridge Column Systems with Reinforcement Details for Material Quantity Reduction: I. Development and Verification)

  • 김태훈;이재훈;신현목
    • 한국지진공학회논문집
    • /
    • 제18권1호
    • /
    • pp.1-8
    • /
    • 2014
  • The purpose of this study was to investigate the performance of hollow reinforced concrete bridge column systems with reinforcement details for material quantity reduction. The proposed reinforcement details have economic feasibility and rationality and make construction periods shorter. A model of hollow reinforced concrete bridge columns was tested under a constant axial load and a quasi-static cyclically reversed horizontal load. As a result, proposed reinforcement details for material quantity reduction were equal to existing reinforcement details in terms of required performance. The companion paper presents the experimental and analytical study for the performance assessment of hollow reinforced concrete bridge column systems with reinforcement details for material quantity reduction.