• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.731-746
• /
• 2021

The purpose of this paper is to investigate the axial bearing capacity and residual properties of steel reinforced recycled aggregate concrete (SRC) column after elevated temperature. A total of 48 SRC columns were designed for the static loading test after elevated temperature. The variables include replacement ratios, designed temperature, target duration, thicknesses of cover concrete, steel ratios and stirrup spacing. From this test, the mass loss ratio and stress load-deformation curve were obtained, and the influence of various parameters on residual bearing capacity were analyzed. ABAQUS was used to calculate the temperature field of specimens, and then got temperature damage distribution on the cross-section concrete. It was shown that increasing of the elevated temperatures leaded to the change of concrete color from smoky-gray to grayish brown and results in reducing the bearing capacity of SRC columns. The axial damage and mechanism of SRC columns were similar to those of reinforced natural aggregate concrete columns at the same temperatures. Finally, the calculation method of axial compressive residual bearing capacity of SRC columns recycled concrete columns after high temperature was reported based on the test results and finite element analysis.

• 한국전자파학회논문지
• /
• 제8권5호
• /
• pp.431-441
• /
• 1997

본 논문에서는 LCD(Lρst Call Delayed)시스템에 적용할 수 있는 대시식 완전선군의 무한입선모델(M/M/ S모델)과 Erlang-C분포식을 이용하여 Trunked Land Mobile Radio System의 성능분석방법을 제시하였다. 일반적으로 TRS(Trunked Radio System)라고 얄려져 았는 본 시스템의 성능을 분석하기 위해 대시식 완전선군의 무한 입선모텔로 모델링하여 사스템의 채널수, 트래픽량, 단말기당 평균사용시간과 염의의 호가 t초 이상 지연될 확률과의 관계식을 도출하였고 이를 이용하여 호의 지연시간변 시스템 채널수, 트래픽량, 지연확률과의 관계를 시뮬레이션하였다. 또한 시스템의 trunking방식을 통화(message) 및 송선( transmission)방식으로 구분 하여 방식별 성능을 정량적으로 비교분석한 결과 송선 trunking방식의 성능이 우수함을 확인하였다 결국 본 논 문의 목적은 TRS서비스 이용사의 품질을 고려한 TRS통신망의 용량설계방안을 제시하는 데 있다.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.20-26
• /
• 2002

The purpose of this study is preventing the stick, scuffing, scratch between piston and cylinder in advance, and obtaining data for duration test in actual engine operation. The temperature gradient in cylinder bore according to coolant temperature were measured using $1.5{\ell}$ class diesel engine. 20 thermocouples were installed 2mm deep inside from cylinder wall near top ring of piston in cylinder block, at which points major thermal loads exist. It is suggested as proper measurement points for engine design by industrial engineers. Under full load and $70^{\circ}$, $80^{\circ}C$ and $90^{\circ}C$ coolant temperature conditions, the temperature in cylinder block and engine oil increased gradually according to the increase of coolant temperature, the siamese side temperature of top dead center is $142^{\circ}C$ in peripheral distribution, that is about $20^{\circ}C$ higher than that at thrust, anti-thrust, and rear side temperature, respectively. The maximum pressure of combustion gas in $70^{\circ}C$ coolant temperature is about 2 bar lower than those of $80^{\circ}C$ and $90^{\circ}C$ coolant temperature. The engine torque in $80^{\circ}C$, $90^{\circ}C$ coolant temperature condition is about 4.9Nm higher than that of $70^{\circ}C$ coolant temperature.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.189-203
• /
• 2019

Brine leakage is a common phenomenon during construction facilitated by artificial freezing technique, threatening the stability of frozen wall due to the continual thawing of already frozen domain. This paper takes the frequently encountered soft clay in Wujiang District as the study object, and remolded specimens were prepared by mixing calcium chloride solutions at five levels of concentration. Both the deformation and pore water pressure of frozen specimens during thawing were investigated by two-stage loading tests. Three sections were noted from the changes in the strain rate of specimens during thawing at the first-stage load, i.e., instantaneous, attenuated, and quasi-stable sections. During the second-stage loading, the deformation of post-thawed soils is closely correlated with the dissipation of pore water pressure. Two characteristic indexes were obtained including thaw-settlement coefficient and critical water content. The critical water content increases positively with salt content. The higher water content of soil leads to a larger thaw-settlement coefficient, especially at higher salt contents, based on which an empirical equation was proposed and verified. The normalized pore water pressure during thawing was found to dissipate slower at higher salt contents, with a longer duration to stabilize. Three physical indexes were experimentally determined such as freezing point, heat conductivity and water permeability. The freezing point decreases at higher salt contents, especially as more water is involved, like the changes in heat conductivity. The water permeability maintains within the same order at the considered range of salt contents, like the development of the coefficient of consolidation. The variation of the pore volume distribution also accounts for this.

• 한국전문물리치료학회지
• /
• 제19권4호
• /
• pp.24-31
• /
• 2012

The aim of this study was to investigate the effectiveness of self-stretching exercises for iliotibial band (ITB) (Side-lying; right hip and knee were flexed to support the pelvis while left hip was extended and adducted, Standing A; side-bending of the trunk on standing with crossed leg, Standing B; same as Standing A, except the hands were clasped overhead and shifted right side, and Standing C; same as Standing B, except moving the arms diagonally downward) to help determine the most effective self-stretching method to stretch ITB. Twenty-one healthy subjects who do not have ITB shortness from Yonsei University (14 men and 7 women) between the ages of 18 to 28 years voluntarily participated. Ultrasound was performed to measure the thickness of the ITB between the long axis of the ITB and the level parallel to the lateral femoral epicondyle during four self-stretching exercises. All data were found to approximate a normal distribution. We used a one-way repeated-measures analysis of variance (ANOVA) to compare the thickness of the ITB among all self-stretching exercises. The level of significance was set at ${\alpha}$=.05. The ANOVA was followed by Bonferroni's correction. The overall mean of ITB thickness was $1.14{\pm}.4$ mm (${\pm}$ standard deviation) in resting status. The change in the ITB thickness in percentages between the tested position of each self-stretching exercises and resting status was significant (p<.05) (Side-lying $26.62{\pm}10.18%$ with 95% confidence interval [CI]=21.99~31.25%; Standing A $29.46{\pm}16.19%$ with 95% CI=22.09~36.84%; Standing B $44.06{\pm}14.82%$ with 95% CI=37.31~50.81%; Standing C $53.76{\pm}12.1%$ with 95% CI=48.25~59.29%). Results indicated significant differences among four self-stretching exercises except Side-lying versus Standing A (p<.01). Based on these findings, the Standing C self-stretching exercise was the most effective in stretching the ITB thickness among four types of ITB self-stretching exercises. Additionally, the Side-lying self-stretching exercise using gravity to stretch the ITB is recommended as a low-load (low-intensity), long-duration stretch.

• 한국수자원학회논문집
• /
• 제36권4호
• /
• pp.533-545
• /
• 2003

본 연구에서는 설마천 유역에서 관측된 여러 강우-유출사상을 분석하여, 각 사상마다 GIUH의 특성속도를 추정하고, 이를 분석하여 그 변동특성을 살펴보았다. 특히, 본 연구에서는 강우의 특성에 따른 특성속도의 변화에 초점을 맞추어 분석하였다. 설마천 유역의 순간단위도는 HEC-1모형을 이용하여 유도하였으며, 이렇게 유도된 순간 단위도의 첨두유량과 첨두시간을 GIUH의 그것과 비교함으로서 특성속도가 계산될 수 있도록 하였다. 각 강우사상별 특성속도는 GcIUH 및 강우의 여러 특성과 비교분석하였다. 이 과정을 통하여 얻은 결과를 정리하면 다음과 같다. (1) GIUH의 특성속도는 GcIUH의 그것보다 변동정도가 크고 아울러 약간 크게 산정되었으나 그 경향은 유사한 것으로 파악되었다. (2) 총유효우량(또는, 평균유효우량)이 GIUH의 특성속도를 상대적으로 잘 설명함을 파악할 수 있었다. 이는 회귀분석의 결과로 나타나는데 그 결정계수가 0.6 전후로 크게 나타났다. (3) 반대로 강우의 지속 기간이나 최대강우강도는 GIUH의 특성속도를 결정하는데 큰 영향을 끼치지 못하고 있음을 파악하였다. 회귀분석 결과 결정계수는 최대 0.3을 넘지 않았다. (4) 본 연구에서 분석한 강우사상들의 경우 GIUH의 특성속도의 분포가 평균 0.402m/s 표준편차0.173 m/s인 정규분포를 따르는 것으로 나타났으며, 주로 0.4∼0.5 m/s 사이에 대부분의 값이 위치하는 것으로 나타났다. 그 변동계수는 0.43정도로 유출의 경우(대략 1.0 정도)에 비해 훨씬 적은 변동특성을 나타냄을 확인할 수 있었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권4호
• /
• pp.283-296
• /
• 2014

본 연구에서는 연안오염총량관리가 시행되고 있는 시화호 유역에서 비점오염 형태로 유입되는 중금속 유출 특성, 오염도 및 위해성을 평가하기 위하여 반월 스마트 허브(산업단지)에 위치한 강우유출수 내 용존성과 입자성 중금속(Co, Ni, Cu, Zn, Cd 및 Pb)을 조사하였다. 용존성 Co와 Ni은 강우초반에 농도가 높고 이후 감소하는 경향을 보였으나, 나머지 용존성 중금속과 입자성 중금속은 강우량 증가에 따라 농도가 큰 폭으로 증가하는 경향을 보였다. 총 중금속 중 입자성 중금속이 차지하는 상대적인 비율은 Pb이 97.2%로 가장 높고 Cu>Cd>Co>Zn>Ni순이었으며, 입자-용존 분배계수($K_d$) 결과는 강우유출수 내 존재하는 Pb는 다른 중금속에 비해 빠르게 입자형태로 제거되는 것으로 나타났다. 본 연구를 통해 1일의 강우 이벤트 동안 2개의 토구를 통해 유출되는 총 중금속의 유출량은 Co 2.21 kg, Ni 30.5 kg, Cu 278.3 kg, Zn 398.3 kg, Cd 0.39 kg 및 Pb 40.0 kg로 나타났다. 연안오염총량관리제도가 시행되고 있는 시화호의 유역면적, 연간 강우량 등을 고려할 때 막대한 양의 중금속이 비점오염의 형태로 시화호로 유입되고 있음을 알 수 있었다. 무엇보다 강우유출수 내 용존성 Ni, Cu 및 Zn의 평균농도는 급성 독성을 나타내는 수질기준(급성 단기기준)를 초과하고 있으며, 입자성 중금속 역시 모든 원소가 배경농도에 비해 농축도(오염도)가 매우 높고, 국내 퇴적물 관리기준(PEL)을 큰 폭으로 초과하고 있어, 주변 해역 환경 및 생태계에 악영향을 미칠 것으로 판단된다.