• 제목/요약/키워드: Load balancing

검색결과 922건 처리시간 0.017초

실시간 신호제어를 위한 신경망 적용 지체최소화 주기길이 설계모형 개발 (Development of Neural Network Based Cycle Length Design Model Minimizing Delay for Traffic Responsive Control)

  • 이정윤;김진태;장명순
    • 대한교통학회지
    • /
    • 제22권3호
    • /
    • pp.145-157
    • /
    • 2004
  • 국내 실시간 신호제어시스템은 주요교차로의 검지체계에서 산출되는 포화도 정보 및 실시간 신호운영자료를 토대로 차기 주기길이를 설계하고 있다. 이러한 국내 실시간 신호제어시스템의 주기길이 설계모형에 의해 설계되는 차기주기길이는 교통량이 증가하면 주기길이도 증가한다는 주기길이 결정 기본원리를 따르고 있으나 해당 주기길이 설계모형으로 결정되는 주기길이가 과연 지체최소화 주기인지 검토가 요구된다. 또한 국내 실시간 신호제어시스템의 주기길이 설계모형에는 운영자 결정 변수가 있어 차기 주기길이 설계가 비효율적일 수 있으므로 운영자 결정 변수를 제외한 주기길이 설계모형 개발이 필요하다. 이에 본 연구에서는 (1)국내 실시간 신호제어시스템의 주기길이 설계모형을 검토하고, (2)운영자 결정변수를 제외한 주기길이 설계모형을 개발한다. 국내 실시간신호제어시스템의 주기길이 설계모형을 검토한 결과 (1)교차로의 운영상태가 비포화일 경우 지체최소화 주기보다 큰 주기길이를 설계하는 것으로 검토되었고, (2)교차로의 현재 신호주기가 90초 이상일 경우 목적 운영포화도(Target operational volume-to-capacity ratio)가 0.90을 유지하는 반면 신호주기가 90초 미만일 경우 목적운영포화도가 0.90보다 작아지는 것으로 검토되었다. 본 연구는 이러한 점을 고려, 신경망을 이용하여 운영자 결정변수를 제외한 국내 실시간 신호제어시스템을 위한 지체 최소화 주기길이 설계 모형을 개발하였다. 모형 검증결과 본 연구에서 개발된 신경망 모형은 국내 실시간 신호 제어시스템과는 달리 지체최소화 주기길이와 유사한 패턴으로 주기길이를 설계한다는 결과를 도출하였다.택배서비스시장도 성장한 것으로 나타났다. 특히 정부주도에 의한 정보화추진이 전자상거래를 촉진시켜 택배서비스시장에 영향을 미친 것으로 분석되었다.수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수

공기조화, 냉동 분야의 최근 연구 동향 - 1998년 1999년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research - A Review of papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 1998 and 1999 -)

  • 이재헌;김광우;김병주;이재효;김우승;조형희;김민수
    • 설비공학논문집
    • /
    • 제12권12호
    • /
    • pp.1098-1125
    • /
    • 2000
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

  • PDF