• Architectural research
• /
• 제16권1호
• /
• pp.27-35
• /
• 2014

Nonlinear analysis of reinforced concrete structures is carried out by using Reissner-Mindlin (RM) shell finite element (FE). The brittle inelastic characteristic of concrete material is represented by using the elasto-plastic fracture (EPF) material model with the relevant material models such as cracking criteria, shear transfer model and tension stiffening model. In particular, assumed strains are introduced in the formulation of the present shell FE in order to avoid element deficiencies inherited in the standard RM shell FE. The arc-length control method is used to trace the full load-displacement path of reinforced concrete structures. Finally, four benchmark tests are carried out and numerical results are provided as future reference solutions produced by RM shell element with assumed strains.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권2호
• /
• pp.78-84
• /
• 2000

This paper introduces a method of determining the maximum real power transfer limit of interface lines, which connect two areas of a power system, using locally parameterized continuation algorithm. This method traces the path of power flow solutions as interface flow is gradually increased under a certain load demand condition and finds the steady state voltage stability limit, the interface flow limit. Voltage stability index is used to indicate how close the maximum limit is reached. Also, this study presents a procedure to determine the security-constrained interface flow limit using the above method. Contingency ranking index is proposed to identify the severity of contingencies. The case study is performed according to the suggested procedure.

• 한국지반공학회논문집
• /
• 제38권3호
• /
• pp.5-16
• /
• 2022

극한 및 극서지에서는 환경적 요인으로 인하여 지반 침하가 발생할 수 있다. 지반의 침하는 부주면 마찰력을 발생시켜 선단 하중을 증가시켜 말뚝의 안정성을 저해할 수 있다. 본 연구에서는 지반 침하 시 부주면 마찰력에 의해 소폭 압축되는 지반 변형 대응 부재가 삽입되어 부주면 마찰력을 저감시키는 말뚝을 제안하였다. 지반 변형 대응 부재로는 스프링 및 스프링-대시팟 부재가 고려되었다. 제안된 말뚝의 성능을 검증하기 위해 모형 실험을 통해 지반 침하 시 일반 말뚝과 지반 변형 대응 부재가 적용된 말뚝의 선단 하중, 주면 마찰력, 횡 토압을 측정하고 분석하였다. 실험 결과, 스프링 부재 말뚝은 침하량이 작은 경우에는 스프링의 압축에 의해 상대변위가 줄어들며 부주면 마찰력이 감소하였다. 그러나 지반이 지속적으로 침하함에 따라 스프링이 더 이상 압축되지 않는 시점부터는 하중 전달 기전이 일반 말뚝과 유사해졌다. 스프링-대시팟 부재 말뚝의 경우, 대시팟이 스프링으로의 하중 전달을 지연시키고 하중 제하 곡선상에 주면 마찰력을 위치시키므로 지반 침하로 인한 부주면 마찰력이 지속적으로 감소하였다.

• 한국통신학회논문지
• /
• 제39C권12호
• /
• pp.1261-1266
• /
• 2014

스마트 조선소는 조선소내 모든 업무를 모바일 애플리케이션을 이용하며, 스마트 단말의 급속한 보급과 다양한 모바일 서비스로 인한 인프라의 과부하가 예상된다. 기존의 인프라의 과부하를 줄이기 위한 매크로셀 및 펨토셀, 코어 네트워크 장비의 증설은 문제가 있기 때문에, 본 논문에서는 스마트 조선소 네트워크에 기존의 인프라를 통한 통신에 비해 자원의 효율성을 높이고 인프라의 부하를 줄일 수 있는 D2D 통신 기술을 적용한다. 스마트 조선소내 D2D 통신 기술을 적용하기 위한 네트워크 구성과 D2D 단말 탐색 및 데이터 전송 방법과 트래픽 타입에 따른 데이터 전송 경로 방안을 제안하였다. 코어 네트워크의 과부화된 트래픽을 최적화된 경로로 보낼 수 있는지 기능 수행여부를 state transition diagram을 이용하여 확인하였다. 우리는 스마트 조선소내 D2D 통신 기술을 적용함으로써 기존의 통신 방법보다 더 효율적인 트래픽 처리가 가능할 것이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.129-133
• /
• 2005

Vibration transmitted through rolling tire is a major source of road noise in vehicle interior noise on the range of low frequency.($0{\sim}500Hz$) Among various road noises, tire cavity noise has very peak on $200{\sim}250Hz$. And generally it is generated by cavity resonance of tire. In this paper, tire cut-sample is used to calculate the tire cavity frequency. Cavity resonance frequency of tire is measured through vertical/tangential forces at load cell of axle using drum cleat impact. This method is useful to find cavity peak because measured forces do not have complex peaks. And changing the test conditions (air inflation, loads), tire cavity resonance characteristics are identified. Finally, vehicle interior noise is measured as tire/vehicle are changing. As difference of tire vertical force is bigger, interior noise level is higher at cavity frequency. Also we can assume that vehicle sensitivity is important factor at tire cavity noise.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.799-805
• /
• 2005

This paper describes the development process of high stiffness body for ride and handling performance. High stiffness and light weight vehicle is a major target in the refinement of Passenger cars to meet customers' contradictable requirements between ride and handling performance and fuel economy This paper describes the analysis approach process for high stiffness body through the data level of body stiffness. According to the frequency band. we can suggest the design guideline about lg cornering static stiffness, torsional and lateral stiffness, body attachment stiffness. The ride and handling characteristic of a vehicle Is significantly affected by vibration transferred to the body through the chassis mounting points from front and rear suspension. It is known that body attachment stiffness is an important factor of ride and handling performance improvement. And high stiffness helps to improve the flexibility of bushing rate tuning between handling and road noise. It makes possible to design the good handling performance vehicle and save vehicles to be used in tests by using mother car at initial design stage. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.358-361
• /
• 2004

This paper describes the development process of high stiffness body for ride and handling performance. High stiffness and light weight vehicle is a major target in the refinement of passenger cars to meet customers' contradictable requirements between ride and handling performance and fuel economy. This paper describes the analysis approach process for high stiffness body through the data level of body stiffness. According to the frequency band, we can suggest the design guideline about Is cornering static stiffness, torsional and lateral stiffness, body attachment stiffness. The ride and handling characteristic of a vehicle is significantly affected by vibration transferred to the body through the chassis mounting points from front and rear suspension. It is known that body attachment stiffness is an important factor of ride and handling performance improvement. And high stiffness helps to improve the flexibility of bushing rate tuning between Handling and road noise. It makes it possible to design the good handling performance vehicle at initial design stage and save vehicles to be used in tests by using mother car at initial design stage. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.61-69
• /
• 2006

Vertical vibrations on the slab of buildings are affected by types of vibration sources, transfer paths, and the material property and the size of members. Among these parameters, the vibration sources and the transfer path can not be controlled, but the property and the size of members can be controlled in the phase of design the members. In this study, the vibration responses according to the property and size of members were obtained by using a prediction program based on dynamic-stiffness matrix. Three parameters which are not usually considered as major factors for architecral planning were selected fur these analyses. They are the strength of materials, the thickness of wall and the thickness of slab. The ground vibration source located near a building was used as vibration input data in the analyses. This study has its originality on presenting appropriate property and size of structural members in order to reduce vertical vibration of slab in shear-wall structures. Analysing the results from the vibration estimation program according to the variations of parameters, the appropriate ratio among the sizes of structural members were proposed. From these results, the vibration level on the slab which is not constructed yet would be predicted and the vibration peak level can be reduced or shifted into the desirable frequency range. Therefore, the vertical vibration could be controlled in the phase of designing buildings.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.773-791
• /
• 2023

Connections with damage concentrated to pre-selected components can enhance seismic resilience for moment resisting frames. These pre-selected components always yield early to dissipate energy, and their energy dissipation mechanisms vary from one to another, depending on their position in the connection, geometry configuration details, and mechanical characteristics. This paper presents behaviour insights on two types of beam-to-beam connections that the angles were designed as energy dissipation components, through the results of experimental study and finite element analysis. Firstly, an experimental programme was reviewed, and key responses concerning the working mechanism of the connections were presented, including strain distribution at the critical section, section force responses of essential components, and initial stiffness of test specimens. Subsequently, finite element models of three specimens were established to further interpret their behaviour and response that were not observable in the tests. The moment and shear force transfer paths of the composite connections were clarified through the test results and finite element analysis. It was observed that the bending moment is mainly resisted by axial forces from the components, and the dominant axial force is from the bottom angles; the shear force at the critical section is primarily taken by the slab and the components near the top flange. Lastly, based on the insights on the load transfer path of the composite connections, preliminary design recommendations are proposed. In particular, a resistance requirement, quantified by a moment capacity ratio, was placed on the connections. Design models and equations were also developed for predicting the yield moment resistance and the shear resistance of the connections. A flexible beam model was proposed to quantify the shear resistance of essential components.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.108-114
• /
• 2002

본 연구에서는 KSR-Ⅲ 로켓의 날개-동체 조인트에 대한 비선형 유한요소해석을 수행하므로 적절한 설계 개선을 제시하였으며, 최종 설계의 검증을 위해 수행된 구조 시험 결과와 비교하여 해석의 타당성을 평가하였다. 날개-동체 조인트는 동체 프레임 상에 존재하는 체결 홈에 날개의 체결부가 끼워짐으로 연결되는 방식으로 설계되었다. 이 방식은 연결 구조물간의 하중 전달을 주로 구조물간의 접촉면을 통해 이루어지게 하며, 체결 볼트를 통해서는 구조물을 고정하되 전달 하중은 최소화하기 위한 것이다. 조인트 구조의 정확한 해석을 위해 연결 구조물간의 접촉 및 체결 볼트를 통한 하중 전달을 묘사할 수 있는 세심한 구조 모델링을 적용하였다. 해석 결과에 의해 제시된 설계 개선은 구조시험을 통해 안전성이 검증되었으며, 해석 및 시험 결과가 잘 일치하였다.