LNG 천연가스로서 저장과 운반이 용이한 액체로 변형이 가능하며, 청정연료로 각광받게 되어, 석유에너지의 의존도를 낮추고 에너지사용의 다변화를 위해 1986년 인도네시아로부터 처음 도입된 이래로 산업의 성장과 더불어 그 수요량이 지속적으로 증가하고 있다. LNG는 천연가스의 부피를 영하 약 $-162^{\circ}C(-260^{\circ}F)$까지 냉각시켜 1/600까지 줄일 수 있으므로, 저장 및 운반에 있어서 매우 효율적이다. 현대의 LNG 저장탱크는 철근 콘크리트 이중벽과 내부 니켈방호벽 및 벽사이의 효율이 높은 단열재로 구성된 완전 방호식이 적용되고 있다. 단열재는 극저온의 온도가 LNG 탱크 외벽으로 전달되는 것을 차단하며, 바닥슬래브, 외벽 및 상부에 설치된다. LNG 저장탱크의 단열재의 배치에 따라 콘크리트 외조에 작용하는 온도분포에 차이가 나므로, 본 연구에서는 기 건설된 완전 방호식 LNG 저장탱크 바닥판 단열재의 배치에 대해 검토하고, 이를 바탕으로 단열시스템 개선 방안을 제안하고자 한다.
RC 무량판 구조는 강도 뿐만 아니라 사용성 조건에 지배받을 수 있으며, 시공 과정 및 이에 따른 동바리로 연결된 슬래브들 간의 중력하중의 분포가 무량판의 장단기 거동에 영향을 주는 중요한 요소로 작용할 수 있다. 조기재령 슬래브에 과하중이 작용하여 균열이 발생하는 경우 시공 과정에서 무량판 구조의 처짐이 크게 증가할 수 있으므로, 동바리 재설치를 통해 다층지지 슬래브에서 하중의 수직 분포를 조절하는 것은 처짐을 감소시키는 데 도움이 될 수 있다. 이 연구에서는 무령판 구조의 장단기 처짐에 대한 동바리 재설치 작업의 영향을 분석한다. 다양한 동바리 재설치 조건과 슬래브 설계 및 시공 조건에 따른 슬래브 시공하중이 간편법에 의하여 정의되고, 시공 과정과 콘크리트의 균열 및 장기 효과를 고려한 슬래브 처짐 실용해석법을 통해 장단기 처짐이 산정된다. 변수연구를 통하여 동바리 재설치 작업의 슬래브 처짐 저감효과를 검증하며, 슬래브 처짐을 위한 동바리 시공과 슬래브 설계 및 시공에 대한 최적 조건을 분석한다.
총각김치의 신선도표시계 개발을 위하여 총각김치를 제조한 후 $20^{\circ}C,\;10^{\circ}C,\;4^{\circ}C$에서 저장하면서 총각김치의 발효 중 pH, 총산도, 총균수, 젖산균수, 환원당 측정 및 관능평가를 수행하였다. 모든 저장 온도에서 pH는 약간 증가하다가 발효가 진행됨에 따라 $4.2{\sim}4.3$까지 낮아졌고 저장 온도가 높을수록 감소속도가 빨랐다. 총산도는 $20^{\circ}C$ 에서 1일, $10^{\circ}C$에서 5일, $4^{\circ}C$에서 7일 이후 급격히 증가하는 경향을 보였다. 총균수와 젖산균수는 저장 온도 $20^{\circ}C$ 에서 4일, $10^{\circ}C$에서 10일, $4^{\circ}C$ 에서 30일 까지 증가했다가 이후 감소하였다, 관능평가 결과 총각김치의 가식기간은 저장 온도 $20^{\circ}C$에서 4일, pH 4.5까지, $10^{\circ}C$ 에서 10일, pH 4.4까지, 그리고 $4^{\circ}C$에서 30일, pH 4.3으로 판단된다. 본 연구결과 총각김치의 유통기한은 저장 온도에 따라 큰 차이를 보였으며 유통기한 설정을 위한 신선도표시계 개발에 있어서 한계 pH는 4.3으로 판단된다.
The significance of the casting/forging process for reducing the production cost of large components is being noted in these days. This casting/forging process is a method of forging a workpiece preformed by casting into the final shape. In this study, the casting/forging process has been applied in manufacturing a large aluminum flange in order to reduce press capacity and material cost. Firstly, a hot compression test was performed with cast cylindrical billets in order to determine the optimum forging condition of the aluminum flange. The optimum range of forging temperature of Al 5083 was from 420$\^{C}$ to 450$\^{C}$. The suitable strain rate was 1.5 sec(sup)-1. The deformation amount of a preform of a preform in a forging process is a key role in the mechanical properties of casting/forging products. In order to find the change of mechanical properties according to effective stain of cast aluminum billets, a hot upsetting test were performed with rectangular blocks and then a uniaxial tensile test was performed with specimens cut from the upsetted billets. The tensile strength and the elongation of cast/upsetted aluminum billets were increased largely until the effective strain was 0.7. FE analysis was performed to determine the configurations of case preform and die for an aluminum flange. In the FE analysis, the forging load-limit was fixed 1500ton for low equipment cost. The cast preform was designed so that the effective stain around the neck of a flange exceeded 0.7. From the result of FE analysis, optimal configurations of the cast preform and the die were designed for a large flange. The filling and solidification analysis for a sound cast-preform was carried out with MAGMA soft. In the forging experiment for an aluminum flange, it was confirmed that the optimal configuration of the cast preform predicted by FE analysis was very useful. The cast/forged products using designed preform were made perfectly without any defects.
Recently, during the multi-level fusion with pedicle screws, interspinous spacer are sometimes substituted for the most superior level of the fusion in an attempt to reduce the number of fusion level and likelihood of degeneration process at the adjacent level. In this study, a finite element (FE) study was performed to assess biomechanical efficacies of the interspinous spacer combined with posterior lumbar fusion with a previously-validated 3-dimensional FE model of the intact lumbar spine (L1-S1). The post-operative models were made by modifying the intact model to simulate the implantation of interspinous spacer and pedicle screws at the L3-4 and L4-5. Four different configurations of the post-op model were considered: (1) a normal spinal model; (2) Type 1, one-level fusion using posterior pedicle screws at the L4-5; (3) Type 2, two-level (L3-5) fusion; (4) Type 3, Type 1 plus Coflex$^{TM}$ at the L3-4. hybrid protocol (intact: 10 Nm) with a compressive follower load of 400N were used to flex, extend, axially rotate and laterally bend the FE model. As compared to the intact model, Type 2 showed the greatest increase in Range of motion (ROM) at the adjacent level (L2-3), followed Type 3, and Type 1 depending on the loading type. At L3-4, ROM of Type 2 was reduced by 34~56% regardless of loading mode, as compared to decrease of 55% in Type 3 only in extension. In case of normal bone strength model (Type 3_Normal), PVMS at the process and the pedicle remained less than 20% of their yield strengths regardless of loading, except in extension (about 35%). However, for the osteoporotic model (Type 3_Osteoporotic), it reached up to 56% in extension indicating increased susceptibility to fracture. This study suggested that substitution of the superior level fusion with the interspinous spacer in multi-level fusion may be able to offer similar biomechanical outcome and stability while reducing likelihood of adjacent level degeneration.
Kim, Jong Hyun;Won, Byeong Hee;Sim, Woo Sang;Jang, Kyung Seok
대한인간공학회지
/
제35권6호
/
pp.503-517
/
2016
Objective: The aim of this study was to evaluate the effectiveness of 3 dimensional contoured pillow through analyzing contact pressure and to suggest its design guidelines through analyzing the posture of head and neck area. Background: The quality of sleep is a very important factor closely related with human's health. To improve the quality of sleep, the verification of design factors affecting the posture of the head and neck is needed, and a pillow design that can induce proper posture is required. Method: This study measured the contact pressures of the two reference groups (bead and cotton pillows) as a method to evaluate the design effectiveness of the contoured pillow. This study proposed 3-dimensional design guidelines by drawing anthropometry (head length) affecting cervical curvature angle (CCA) through the measurement of the participants' cervical curvature angles. Results: In the design effectiveness evaluation, the contact pressure of cervical region was higher than that of a reference group (cotton pillow), and contract area increased, and contract pressure decreased in the shape distributing the occipital region's body pressure. This study proposed pillow's cervical supporting height by percentile of a head length [head length (%tile) (cervical supporting height) affecting the posture of the head and neck: 14.6cm (5%tile) (6.2cm), 15.5cm (25%tile) (6.7cm), 16.4cm (50%tile) (7.1cm), and 19.3cm (75%tile) (8.9cm)]. Conclusion: This study confirmed the contoured pillow's design effectiveness maintaining cervical angle comfortable to sleep with the shape supporting the cervical vertebrae and by reducing the contact load of the occipital region. Also, this study proposed pillow design guidelines based on the 3-dimensional contoured pillow design effectiveness, through which the study laid the foundation for pillow design in a systematic method. Application: The results of this study are expected to be utilized as the basis data by which the optimum pillow type and pillow design according to main percentile can be standardized.
대공간 구조는 형태저항구조로서, 기둥-보로 구성되는 일반적인 건축골조구조가 설계외력에 대해 휨 및 전단으로 저항되는 것에 반해, 구조물의 내부에 기둥이 없는 공간을 내포하는 대공간 구조는 축력 및 면내 단면력에 의해 저항되는 경우가 대부분이다. 이러한 특성상 공간구조에는 일반적으로 장스팬이 사용되는 경우가 많으며, 그 결과 일반적인 골조와는 달리, 부재에 발생하는 변형도가 작은 경우에도 큰 변형이 발생하는, 즉 대변형 혹은 유한변형을 동반하게 된다. 일반적으로 수치해석에 있어 비선형 해석이란 기하학적 비선형 및 재료적 비선형, 또는 이 두 가지를 동시에 고려한 복합 비선형 해석을 들 수가 있다. 본 논문에서는 유한요소법으로 기하학적 비선형을 고려한 비선형 평형방정식을 적용하고, 부재의 응력-변형률 관계를 이용하여 재료적 비선형성도 함께 고려하였다. 사용된 수치해석 기법은 불안정 경로의 해를 찾아갈 수 있는 호장법을 적용하여 하중-변위 곡선을 추적하였다. 또한, 해석 결과는 범용 유한요소 프로그램인 ABAQUS를 이용하여 비교 검토하였다. 본 연구의 수치 해석결과 제시한 평면 및 공간 트러스의 비탄성 비선형 거동을 정확하고 효율적으로 예측 가능한 것으로 나타났다.
치과위생사의 직무스트레스 수준과 관련된 직무요인을 파악하기 위하여 부산 경남지역의 500명 중 부적절하게 조사된 184명을 제외한 316명을 연구대상으로 한국인 직무스트레스 측정도구 기본형(KOSS-43)을 활용하여 자기기입식 설문조사를 시행한 결과는 다음과 같다. 1. 치과위생사의 전체 직무스트레스는 $52.42{\pm}4.95$로 나타났으며, 세부항목별로는 관계갈등이 $64.56{\pm}12.17$로 가장 높게 나타났고, 물리환경 $59.85{\pm}13.59$, 조직체계 $54.60{\pm}13.51$, 직무요구 $52.37{\pm}11.47$, 보상부적절 $51.71{\pm}10.58$, 직무자율성 결여 $48.14{\pm}12.97$, 직무불안정 $46.68{\pm}9.25$, 직장문화 $41.46{\pm}15.98$의 순으로 나타났다. 2. 치과위생사의 직무스트레스와 관련된 요인으로는 일반적 특성 중 운동, 직무관련 특성 중 신체적 부담감과 반복 작업시간 등 이었다. 이상의 연구결과 치과위생사의 직무스트레스는 한국인 근로자의 직무스트레스 수준과 비교하여 평균이상의 높은 수준을 나타내었고, 직무스트레스의 예방을 위하여 적절한 직무부담과 작업시간 조절을 통한 신체적 부담을 줄일 수 있는 방법과 치과위생사의 직무특성을 고려한 적절한 작업량 조절방안 등이 필요할 것이다.
매실을 건조한 분말과 농축액을 각각 0.5%, 1.0% 첨가한 된장을 만들고 숙성하면서 품질특성의 변화를 고찰하였다. 된장의 숙성 기간이 경과함에 따라 수분함량은 다소 증가하였으며, 특히 숙성 2주의 수분함량 증가가 다른 기간에 비하여 현저하였다. 된장 숙성중 전질소의 함량은 큰 차이를 보이지 않았으나 아미노태 질소 함량은 숙성 기간 중 지속적으로 증가하였으며, 숙성 2주 동안의 증가가 현저하였다. 매실분말 및 매실 농축액 첨가구에 비하여 대조구의 아미노태 질소 함량이 높았다. 매실분말 및 매실농축액을 첨가한 시험구의 효모 및 곰팡이수는 된장 담금2주 이내에 대조구보다 낮았으며, 담금 직후 대조구는 7.02(log10 cfu/g) 및 7.23(log10 cfu/g)이었는데 비하여 매실분말 및 매실농축액 첨가구는 $5.97{\sim}7.00$(log10 cfu/g) 이었다. 환원당 함량은 숙성 2주 이후부터 4주까지 급격하게 감소하였으며, 그 이후에는 큰 차이를 보이지 않았다. 된장은 숙성중 L, a 및 b값 모두 숙성 4주에 최대값을 나타내고, 그 이후에는 감소하였다. 된장 담금 직후에는 매실분말 및 매실농축액 첨가구의 물 추출물에 대한 래디칼 소거능은 대조구보다 낮았으나 메탄을 추출물 및 에탄을 추출물은 대체적으로 대조구보다 높았다. 6주간 숙성된 된장의 관능검사 결과 색, 냄새 및 맛에서 대조구 1이 가장 높은 점수를 얻었으며, 매실분말 및 매실농축액 첨가구는 이보다 낮은 값을 나타내었다. 그러나 매실분말 및 매실농축액 0.5% 첨가구는 대조구 1, 대조구 2와 유의적인 차이를 보이지 않았다.
철근콘크리트 구조물은 시간이 경과함에 따라 외력의 증가나 환경의 변화 등에 의하여 노후화되고 그 기능을 상실하게 된다. 이러한 구조물의 기능을 회복하기 위하여 보수$\cdot$보강 공법이 적용되고 있다. 본 연구에서는 이러한 보수$\cdot$보강 공법 중프리스트레싱 공법과 단면증설 공법의 특성을 도입한 강연선과 폴리머 모르타르에 의한 보수$\cdot$보강 공법이 적용된 슬래브의 휨 거동특성을 통해 기존 구조물의 보수$\cdot$보강 효과를 파악하였다. 실험은 강연선의 직경, 모르타르의 종류, 치핑 여부, 모르타르 두께, 강연선의 간격 등의 실험변수에 따라 1방향 슬래브 10개, 2방향 슬래브 4개의 시험체를 제작하여 수행하였다. 실험결과 강연선의 간격이 감소할수록 보강효과가 증가하였고, 치핑을 한 경우 콘크리트와 모르타르의 계면에서의 균열이 극한하중 이후에서 발생하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.