• 전기화학회지
• /
• 제13권4호
• /
• pp.290-294
• /
• 2010

본 연구는 밀도 범함수 이론을 이용하여 Li이온전지에 사용되는 Li코발트 산화물에서의 Li이온 삽입 전압과 전도에 관한 것이다. Li이온은 Li코발트 산화물 원자구조의 각 층을 1개씩 채우거나 한 층을 다 채우고 다음 층을 채울 수 있다. 평균 삽입 전압은 3.48V로 동일하나, 전자가 후자보다 더 유리하였다. 격자상수 c는 Li농도가 0.25보다 작을 때는 증가하였으나, 0.25보다 클 때는 감소하였다. Li농도가 증가하면, Li코발트 산화물에서의 Li이온 전도를 위한 에너지 장벽은 증가하였다. Li이온전지가 방전 중 출력 전압이 낮아지는 현상은 Li농도 증가에 따른 삽입 전압의 감소와 전도 에너지 장벽의 증가로 설명할 수 있었다.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.90-95
• /
• 2009

This paper presents a new lithium ion unit-cell and pack battery by using a new formulation ratio of material. The three types of formulation ratio for the unit-cell were used. The life cycle and basic properties of the lithium ion unit-cell$({\Psi}18{\times}65(mm))$ about one of them were acquired by the charge-discharge experiment. The nominal voltage, nominal capacity and cycle life output of the lithium ion unit-cell is respectively 3.7V, 2.4Ah, and above 500cycle. Pack type lithium ion battery has the size of $29.5{\times}73.5{\times}115(mm)$ and the weight of 300g. As the results, the weight and bulk of lithium ion battery used to a safety lamp were decreased to 1/4 and 1/7. In addition, the comparison of the new lithium ion battery and lead storge battery for confirming the effectiveness of the new lithium ion battery have been performed.

• 전기화학회지
• /
• 제1권1호
• /
• pp.14-17
• /
• 1998

MPCF는 Li ion 2차전지용 부극 활물질로 연구되고 있다. 흑연화 MPCF는 높은 방전 용량과 우수한 충방전 효율을 가진다. $0\~1$ V전위영역에서 25 mA/g의 정전류로 충방전할 때의 MPCF/Li전지의 초기 방전 용량은 300 mAh/g이며, 충방전 효율은 $90\%$ 이상을 나타낸다. $LiCoO_2$을 정극 활물질로, 혼합 탄소재료를 부극 활물질로 사용하여 원통형 Li ion 2차전지를 제작하였다. Li ion 2차전지의 수명 특성을 향상하기 위하여, 흑연화 MPCF에 이종 탄소 재료를 $10 wt\%$ 혼합하였다. 혼합 탄소재료를 사용한 Li ion 2차전지의 수명 성능은 흑연화 MPCF만을 사용한 전지보다 우수하였다.

• 한국항공우주학회지
• /
• 제42권4호
• /
• pp.351-359
• /
• 2014

본 논문에서는 저궤도 소형인공위성에서 위성의 각 부에 전원을 공급하기 위한 리튬이온 배터리 시스템의 신뢰성 확보를 위해 수행한 우주인증시험들의 결과를 나타내었다. 리튬이온 배터리 시스템의 신뢰성을 검증하기 위하여 구조해적, 성능시험, 우주 및 발사환경에서의 환경시험 등을 수행하였다. 모든 해석 및 시험 결과가 요구조건에 만족함을 보임으로써 리튬이온 배터리를 적용한 소형인공위성의 신뢰성을 검증하고 제고할 수 있었다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.587-591
• /
• 2009

Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

• 한국분말재료학회지
• /
• 제31권2호
• /
• pp.163-168
• /
• 2024

As the demand for lithium-ion batteries for electric vehicles is increasing, it is important to recover valuable metals from waste lithium-ion batteries. In this study, the effects of gas flow rate and hydrogen partial pressure on hydrogen reduction of NCM-based lithium-ion battery cathode materials were investigated. As the gas flow rate and hydrogen partial pressure increased, the weight loss rate increased significantly from the beginning of the reaction due to the reduction of NiO and CoO by hydrogen. At 700 ℃ and hydrogen partial pressure above 0.5 atm, Ni and Li₂O were produced by hydrogen reduction. From the reduction product and Li recovery rate, the hydrogen reduction of NCM-based cathode materials was significantly affected by hydrogen partial pressure. The Li compounds recovered from the solution after water leaching of the reduction products were LiOH, LiOH·H₂O, and Li₂CO₃, with about 0.02 wt% Al as an impurity.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.335-340
• /
• 2018

Transition metal oxide materials have attracted widespread attention as Li-ion battery electrode materials owing to their high theoretical capacity and good Li storage capability, in addition to various nanostructured materials. Here, we fabricated a CoO Li-ion battery in which Co nanoparticles (NPs) are deposited into a current collector through electrophoretic deposition (EPD) without binding and conductive agents, enabling us to focus on the intrinsic electrochemical properties of CoO during the conversion reaction. Through optimized Co NP synthesis and electrophoretic deposition (EPD), CoO Li-ion battery with 630 mAh/g was fabricated with high cycle stability, which can potentially be used as a test platform for a fundamental understanding of conversion reaction.

• 세라미스트
• /
• 제21권4호
• /
• pp.406-415
• /
• 2018

Lithium ion batteries have been widely adopted as energy storage and the LIB global market has grown fastest. However, LIB players have struggled against maximizing energy density since commercial monolithic electrodes are limited by electrolyte depletion caused by long and tortuous Li-ion diffusion pathways. Recently, new strategies designing the structure of battery electrodes strive for creating fast Li-ion path and alleviating electrolyte depletion problem in monolithic electrodes. In this paper, given the fundamental and experimental approaches, we compare the monolithic to structured electrodes and demonstrate the ways to fabricate high energy, fast chargeable Lithium ion battery.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1288-1297
• /
• 2017

The estimation of the remaining useful life (RUL) of lithium-ion (Li-ion) batteries is important for intelligent battery management system (BMS). Data mining technology is becoming increasingly mature, and the RUL estimation of Li-ion batteries based on data-driven prognostics is more accurate with the arrival of the era of big data. However, the support vector machine (SVM), which is applied to predict the RUL of Li-ion batteries, uses the traditional single-radial basis kernel function. This type of classifier has weak generalization ability, and it easily shows the problem of data migration, which results in inaccurate prediction of the RUL of Li-ion batteries. In this study, a novel multi-kernel SVM (MSVM) based on polynomial kernel and radial basis kernel function is proposed. Moreover, the particle swarm optimization algorithm is used to search the kernel parameters, penalty factor, and weight coefficient of the MSVM model. Finally, this paper utilizes the NASA battery dataset to form the observed data sequence for regression prediction. Results show that the improved algorithm not only has better prediction accuracy and stronger generalization ability but also decreases training time and computational complexity.

• 자원리싸이클링
• /
• 제33권1호
• /
• pp.15-21
• /
• 2024

전기차용 리튬이온배터리의 수요가 증가함에 따라 향후 발생할 폐리튬이온배터리 중의 유가금속 회수가 필요하다. 본 연구에서는 리튬이온배터리의 NCM계 양극재를 수소환원과 수침출에 의해 리튬을 수산화리튬으로 회수할 때의 회수율에 미치는 반응온도의 영향을 조사하였다. 반응온도가 상승함에 따라 수소에 의한 NiO, CoO의 환원에 의해 무게 감소율이 반응초기부터 급격하게 증가하였으며 동시에 H₂O 발생량도 증가하였다. 602 ℃ 이상에서는 양극재 중의 Ni, Co가 전부 환원되어 금속상으로 존재하였다. 그리고 수소환원 온도의 상승과 함께 Li 회수률도 증가하였으나 704 ℃ 이상에서는 약 92 % 이상의 유사한 수준을 나타내었다. 따라서 폐Li이온 배터리의 전처리로 수소환원하는 것에 의해 리튬만 사전에 회수하고 잔사를 재처리하면 효율적으로 유가금속을 분리하여 회수할 수 있을 것으로 기대된다.