• 한국재료학회지
• /
• 제8권10호
• /
• pp.884-889
• /
• 1998

대면적의 비정질 실리콘 박막을 가우스 분포(Gaussian Profile)의 일차원 선형빔(line shape beam)을 가지는 엑시머 레이저를 사용하여 결정화를 시켰다. (Corning 7059 glass)위에 증착된 비정질 실리콘 박막이 재결정화된 실리콘 박막의 경우, 두께에따라 결정화되는 모양이 다르게 나타났다. 따라서 두께에 따라 결정화되는 상태의 변화를 조사하기 위하여 angle wrapping 방법을 새롭게 도입하여 깊이에 따른 Si층이 5${\mu}m$ 이상되도록 angle wrapping한 후에 박막의 두께에 따른 micro-raman spectra를 측정하여 결정화상태에 따른 잔류응력을 조사하였다. 또한 기판의 온도가 상온인 경우에 엑시머 레이저의 밀도가 300mJ/${cm}^2$에서 열처리한 경우에 재결정화된 Si 박막의 잔류응력에 박막의 표면에서 박막의 깊이에 따라 $1.3{\times}10^10$에서 $1.6{\times}10^10$을 거쳐 $1.9{\times}10^10$ dyne/${cm}^2$으로 phase의 변화에 따라 증가하였다. 또한 기판의 온도가 $400^{\circ}C$에서 최적의 열처리 에너지 밀도인 300mJ/${cm}^2$에서는 박막의 깊이에 따른 결정화 상태의변화에 따라 thermal stress 의 값이 $8.1{\times}10^9$에서 $9.0{\times}10^9$를 거쳐 $9.9{\times}10^9$ dyne/${cm}^2$으로 변화하는 것을 알 수 있다. 따라서 liquid phase에서 solid phaserk 변화함에 따라 stress값이 증가하는 것을 알 수 있다.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1099-1106
• /
• 1997

In the present study, the effect of TiB2 addition on the sintering behavior of ZrB2 ceramics was studied with hot pressing under Ar atmosphere. Hot pressing experiments were carried out in graphite dies at the 1$700^{\circ}C$, 180$0^{\circ}C$ under Ar atmosphere. The sintering density increased with increasing TiB2 contents. With the addition of 10wt% TiB2 almost theoretical density could be achieved by hot-pressing at 180$0^{\circ}C$. Zr-Ti-Fe-B compound in liquid phase was observed from the EDS and WDS analysis. It was considered that sinterability was enhanced due to the mass transfer through liquid phase formed at the sintering temperature. In addition of TiB2, transition metal of groups IV, substitutional solid solution could be formed.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.4041-4046
• /
• 2010

유연한 알콕시 곁사슬을 갖는 전방향족 폴리에스터가 direct polycondensation에 의하여 합성되었으며, 합성된 중합체들은 $^1H$-NMR, FT-IR, DSC, TGA, 편광현미경 및 X-ray 분석기에 의하여 조사되었다. 1,1,2,2-테트라클로로에탄(TCE)을 용매로 사용하여 측정된 중합체의 고유점성도(${\eta}_{inh}$)는 0.46~2.41 dL/g의 값을 나타내었다. 곁사슬을 갖는 중합체들은 두 개의 용융전이 즉, 고체상-sanidic 액정상으로의 전이 ($T_{m1}$)와 sanidic 액정상-nematic 액정상으로의 전이 ($T_{m2}$)를 나타내었으며, 알콕시 곁사슬의 길이가 증가함에 따라 상전이온도들은 감소하고, 유기용매에 의한 용해도는 증가하는 경향을 나타내었다. X-ray 분석에서, $2{\theta}\;{\simeq}5$와 $2{\theta}\;{\simeq}20$ 피이크는 각각 중합체 주사슬과 긴 곁사슬의 결정화에 의한 것으로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.21-22
• /
• 2003

We perform two kinds of computer simulations on polydisperse hard-sphere systems; a molecular-dynamics simulation on atomic systems and a Brownian-dynamics simulation on colloidal suspensions. Analyses of the mean square displacement, the radial distribution function, and the pressure suggest that there exist three phase regions, a liquid phase region, a metastable phase region, and a crystal phase region, where the freezing and melting points are shifted to the values higher than in monodisperse case. It is also shown that the long-time behavior of colloidal suspensions is exactly the same as that of atomic systems.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• Archives of Pharmacal Research
• /
• 제9권2호
• /
• pp.75-79
• /
• 1986

The effect of phenothiazine derivatives on the thermotropic transition of liposomal lipid bilayer made of dipalmitoyl phosphatidylchline and dipalmitoyl phosphatidic acid was investigated with differential scanning calorimetry. The thermograms of the liposomal bilayer incorporated with levomepromazine, chlopromazine, prochloperazine, perphenazine and fluphenazine were obtained and the size of cooperative unit of the transition were calculated from the ratio of the van't Hoff enthalpy change to the calculated enthalpy change of the transition. The results showed that incorporation of phenothiazine derivatives into the liposomal bilayer reduced the transition temperature at which the transition from solid state to liquid-crystalline state occurs, and broadened the thermogram peaks. Phenothiazine derivatives also significantly reduced the size of cooperative unit of the transition. The effect of the drugs was proportional to the concentration of the drug in the bilayer. This means that phenothiazine derivatives might have significant fluidizing effects on the biomembrane. The sizes of cooperative unit were successfully corrlated with phar-macological activities of the drugs and the surface pressure increases of lipid monolayer by these drugs. These correlations might be ascribed to a possible hydrophobic nature of interaction between the biomembrane and the drugs involved in their pharmacology.

• Archives of Pharmacal Research
• /
• 제11권3호
• /
• pp.181-184
• /
• 1988

The effect of clover saponin on the phase transition of liposomal lipid bilayers of dimyristoyl phosphatidylcholine was investigated with differential scanning calorimetry. The thermograms of the liposomal bilayers incorporated with the clover saponin were obtained, and the enthalpy changes and the sizes of cooperative unit of the transition were calculated. The results showed that incorporation of the clover saponin into the liposomal bilayers effectively reduced the transition temperature at which the transition from solid state to liquid-crystalline state occurs, and broadened the thermogram peaks. It also reduced the size of cooperative unit of the transition. These results indicate that the clover saponin might have significant effect on the fluidity of biological membranes.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.1-23
• /
• 2017

A coupled liquid-gas-solid three-phase model, linking two numerical codes (TOUGH2/EOS3 and $FLAC^{3D}$), was firstly established and validated by simulating an in-situ air flow test in Essen. Then the coupled model was employed to investigate responses of multiphase flow and soil skeleton deformation to compressed air or freshwater injection using the same simulation conditions in an aquifer of Tianjin, China. The simulation results show that with injecting pressurized fluids, the vertical effective stress in some area decreases owing to the pore pressure increasing, an expansion of soil skeleton appears, and land uplift occurs due to support actions from lower deformed soils. After fluids injection stops, soil deformation decreases overall due to injecting fluids dissipating. With the same applied pressure, changes in multiphase flow and geo-mechanical deformation caused by compressed air injection are relatively greater than those by freshwater injection. Furthermore, the expansion of soil skeleton induced by compressed air injection transfers upward and laterally continuously with time, while during and after freshwater injection, this expansion reaches rapidly a quasi-steady state. These differences induced by two fluids injection are mainly because air could spread upward and laterally easily for its lower density and phase state transition appears for compressed air injection.

• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.445-450
• /
• 2024

The expansion of lithium-ion battery usage beyond portable electronic devices to electric vehicles and energy storage systems is driven by their high energy density and favorable cycle characteristics. Enhancing the stability and performance of these batteries involves exploring solid electrolytes as alternatives to liquid ones. While sulfide-based solid electrolytes have received significant attention for commercialization, research on amorphous-phase glass solid electrolytes in oxide-based systems remains limited. Here, we investigate the glass transition temperatures and sintering behaviors by changing the molecular ratio of Li₂O/B₂O₃ in borate glass comprising Li₂O-B₂O₃-Al₂O₃ system. The glass transition temperature is decreasing as increasing the amount of Li₂O. When we sintered at 450℃, just above the glass transition temperature, the samples did not consolidate well, while the proper sintered samples could be obtained under the higher temperature. We successfully obtained the borate glass ceramics phases by melt-quenching method, and the sintering characteristics are investigated. Future studies could explore optimizing ion conductivity through refining processing conditions, adjusting the glass former-to-modifier ratio, and incorporating additional Li salt to enhance the ionic conductivity.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.694-698
• /
• 2004

A new method for the simultaneous determination of seven transition metal ions in water and food by microcolumn high-performance liquid chromatography has been developed. The lead, cadmium, mercury, nickel, cobalt, silver and tin ions were pre-column derivatized with tetra-(4-aminophenyl)-porphyrin ($T_4$-APP) to form the colored chelates which were then enriched by solid phase extraction with $C_{18}$ cartridge. The enrichment factor of 50 was achieved by eluted the retained chelates from the cartridge with tetrahydrofuran (THF). The chelates were separated on a ZORBAX Stable Bound microcolumn ($2.0{\times}50\;mm,\;1.8\;{\mu}m$)with methanol-tetrahydrofuran (95 : 5, v/v, containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH = 10.0) as mobile phase at a flow rate of 0.5 mL/min and detected with a photodiode array detector from 350-600 nm. The seven chelates were separated completely within 2.0 min. The detection limits of lead, cadmium, mercury, nickel, cobalt, silver and tin are 4 ng/L, 3 ng/L, 6 ng/L, 5 ng/L, 5 ng/L, 6 ng/L, 4 ng/L respectively in the original samples. This method was applied to the determination of the seven transition metal in water and food samples with good results.