• Korean Journal of Plant Resources
• /
• v.28 no.6
• /
• pp.697-703
• /
• 2015

Twenty apple germplasm accessions from the Korean Genebank were successfully cryopreserved using two-step freezing to back up genetic resources maintained by field collections. This study examined the morphological and genetic stability of cryopreserved dormant apple buds that were stored in liquid nitrogen, and then rewarmed and regrown. Whole plants were regenerated directly from dormant buds through budding without an intermediary callus phase. The cryopreserved buds produced high levels of shoot formation (76.2-100%), similar to those of noncryopreserved buds (91.3-100%), with no observed differences between cryopreserved and noncryopreserved materials. Three of the twenty cryopreserved apple germplasm accessions were used to assess morphological and genetic stability. No differences in morphological characteristics including shoot length, leaf shape, leaf width/length ratio, and root length were observed between controls (fresh control and noncryopreserved) and cryopreserved plantlets. The genetic stability of regenerants (before and after cryopreservation) was investigated using inter simple sequence repeat (ISSR) markers. The ISSR markers produced 253 bands using four primers, ISSR 810, SSR 835, ISSR 864, and ISSR 899. These markers showed monomorphic banding patterns and revealed no polymorphism between the mother plant and regenerants before and after cryopreservation, suggesting that cryopreservation using two-step freezing does not affect the genetic stability of apple germplasm. These results show that two-step freezing cryopreservation is a practical method for long-term storage of apple germplasms.

• Economic and Environmental Geology
• /
• v.2 no.4
• /
• pp.1-21
• /
• 1969

The Sin po fluorite deposit is of a fissure vein type which strikes $N75^{\circ}E$, dips $80^{\circ}SE$, and is embedded in the pre-Cambrian crystalline schist. The vein is 1 meter in average in thickness, about 800 meters in length and nearly 400 meters in depth. Narrow veins of crustified fluorites and agatic quartz are discontinuously embedded in the quartz gangue. Two-phase fluid inclusions, which are available for the homogenization method by using the Heating Stage Microscope 350, are found in the fluorite crystals. Most of the fluid inclusions are primary in origin and mainly composed of liquid phase associated with minor gas phase. They are tetrahedral, rounded-tubular, wedge shaped, rectangulartrapezoid, and irregular in shape. The maximum diameter of inclusions is 0.5mm and the minimum, 0.03mm, ranging from 0.2mm to 0.08mm in an average. The homogenization temperatures obtained from the test are $135-147^{\circ}C$, $125-138^{\circ}C$, $121-137^{\circ}C$, $116-133^{\circ}C$ and $106-128^{\circ}C$ in greenish, bluish, violet, light grayish blue, colorless and pinkish fluorites respectively. The range of formation temperatures of fluorites is $106-147^{\circ}C$. Therefore, the fluorite deposit of Sinpo Mine is considered to be of low temperature hydrothermal origin. The isothermal lines were drawn on the longitudinal section of the vein from the data of homogenization test. According to the results, the central and lower parts of the ore shoot in the west ore body show the higher temperatures of $130-138^{\circ}C$ and the peripheral and upper parts of it show the lower temperatures of $108-128^{\circ}C$. It seems that the isothermal trend roughly coinside with the pitch of the ore shoot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.32-37
• /
• 1985

Effects of straw mulching on growth of shoot and root of Panax ginseng, soil physical and chemical characteristics were investigated. Straw mulching increased root yield, stem length, leaf area and decreased defoliated plant rate and missing root rate. Percent solid phase and soil hardness decreased, and porosity, percent air phase and percent liquid phase increased under straw mulch. It increased soil water content and decreased soil temperature especially in the rear side of the bed. Available soil phosphorus (very harmfully in some case), exchangeable potassium, organic matter increased while exchangeable calcium decreased and the lowering of pH was retarded under mulch. Straw mulching greatly reduced need population, prevented soil covering on the lower side of leaves and eliminated solings to plants, bed sides and on bed top.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.5
• /
• pp.12-23
• /
• 1994

The two-phase flow is observed in power plants, chemical process plants, and refrigeration systems etc., and it is very important to solve the heat transfer mechanism of a boiler, an automic reactor, a condenser and various types of evaporators. Recently, the problem of two phase heat transfer is braught up in many regions with development of energy saving technique. In flow boiling system it is necessary to store data in each condition because the heat transfer characteristics of flow boiling region vary by the change of flow pattern and the magnetude of heat flux to tube length, and be subtly affected by the flow and heating condition. So basic study for knowing flow pattern in heat transfer region and the relation between heat transfer characteristic and flow condition is desired to accumulate data in wide variety of liquid and flow system in the study of heat transfer of two phase flow. In this study R-113 was selected as working fluid whose properties were programmed by least square method, and experiment was conducted in the region of mass flow $1.628{\times}10^6$~$4.884{\times}10^6$/kg/$m^2$hr with inlet subcooling 10~3$0^{\circ}C$, sustaining test section inlet pressure to 1.5kg$_f$/$cm^2$abs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.3
• /
• pp.300-307
• /
• 2017

This study is to investigate particle size and velocity profile of gasoline port injector using Phase Doppler Particle Analyzer (PDPA). In this experiment, a GV 250 Delphi port injector used for motorcycles was used for liquid injection. The injector consists of four holes and has a static flow rate of 2.13 g/s. The fuel used in the injection was N-heptane, which is similar to gasoline, as an alternative fuel. The test fuel was injected at an atmospheric temperature of $20^{\circ}C$ and an open atmosphere of 1 atm. The injection time was 10 ms and the injection pressure was 3.5 bar in PDPA experiment. The experimental target position was fiexd at 30, 50 and 75 mm from the nozzle tip and data were collected for a total of 10,000 samples. The experimental results show that the length diameter (D10), the Sauter mean diameter ($D_{32}$), and the mean droplet velocity (MDV) are $45-54{\mu}m$, $99-115{\mu}m$ and 15-21 m/s, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.699-708
• /
• 2000

To make compact evaporator, experiments that show characteristics of evaporating heat transfer and pressure drop in the helically coiled small diameter tube were taken in this research. The experiments were performed with HCFC-22 in the helically coiled small diameter tube; inner diameter=1.0(mm), tube length=2.0(m), and curvature diameter=31, 34, 46.2(mm). The experiments were also carried out with the following test conditions; saturation pressure=0.588(MPa), mass velocity=$150{\sim}500(kg/m^2s)$, and heat flux=$1{\sim}5(kW/m^2)$. The experiment results are that the empirical correlation to predict heat transfer coefficient for single phase flow in helically coiled small diameter tube was obtained. It was found that dry-out is occurred at low-quality region for evaporation heat transfer because of breaking of annular liquid film. The friction factor of single phase flow of helically coiled tube was agreed with Prandtl's correlation. Finally, It was proposed for correlation that can precisely predict the friction factor of two phase flow of helically coiled tube.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.5
• /
• pp.487-500
• /
• 2022

Supercavitation is a phenomenon in which the cavity covers the entire underwater vehicle. The purpose of this paper is to compare and analyze the thermal effect on the cavity characteristics by changing the ventilated gas temperature through computational analysis. For this study, a homogeneous mixture model based on the 3D Navier-Stokes equation was used. As a phase change model, it is its own code considering both pressure change and temperature change. A dimensionless number T_m was presented to analyze the numerical results, and as the T_m increased, the cavity length increased by about 3.6 times and the cavity width by about 3.3 times at 393.15 K compared to room temperature. Analyzing these thermal effects, it was confirmed that rapid heat exchange and heat transfer between the gas phase and the liquid phase occurred at the location where the ventilated gas was sprayed, affecting the cavity characteristics. In addition, it can be confirmed that the initial cavity surface becomes unstable as the ventilated gas temperature increases, and it can be confirmed based on the numerical analysis results that the critical temperature at which the cavity surface becomes unstable is 373.15 K.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.660-667
• /
• 2017

Equilibrium data of the mixture is essential in the design and operation of separation equipment such as distillation or extraction in chemical processes. These equilibrium data can be obtained through experiments or by calculations using the known binary parameters and the thermodynamic models. Generally, to obtain these parameters, phase equilibrium experimental data such as gas-liquid and liquid-liquid are used. In this study, the excess enthalpy of the mixture was measured using the flow type microcalorimeter which is a simpler method than phase equilibria experiments, and the parameters of various theories were obtained by using this data. In order to investigate the relationship between carbon chain length, enthalpy and binary parameters in the alkane system, excess enthalpies for the n-hexane + alkane (n-pentane, n-heptane, n-octane and n-dodecane) were measured at 298.15 K and the banary interaction parameters of Wilson, NRTL, and UNIQUAC were obtained from the experimental data. In addition, we wanted to obtain basic information on the interaction and association phenomena of the system including electrolyte applicable to various fields by using the excess enthalpy experimental data and the existing theory. First, we investigated the excess enthalpy for the NaOH / Water / Ethanol system as a basic experiment and examined the applicability using the electrolyte-NRTL (eNRTL) theory.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.603-611
• /
• 2009

Thermotropic liquid crystalline behavior of a homologous series of penta-O-4-{4'-(cyanophenylazo)phenoxy}alkyl-D-glucopyranoses(CAGETn, n = 2~10, the number of methylene units in the spacer) has been investigated. The CAGETn with n of 2 and 7 exhibited enantiotropic nematic phases whereas other derivatives showed monotropic nematic phases. This is the first report of glucose derivatives that form thermotropic nematic phases. The isotropic-nematic transition temperatures ($T_{iNS}$) of CAGETns and their entropy variation at $T_{iN}$ showed the odd-even effect as a function of n. This behavior was rationalized in terms of the change in the average shape of the side chains as the parity of the spacer is varied. This rationalization also accounts for the observed variation of nematic-crystalline phase transition temperatures ($T_{NkS}$) and associoated entropy change at $T_{Nk}$. The entropy change at $T_{iN}$ or $T_{Nk}$ reaches a mininum at n = 3, before it increases again for n = 4. This may be attributed to the difference in the arrangement of the side groups. The mesophase properties of CAGETns were entirely different from those reported for partially or fully alkylated glucopyranoses. This result suggests that the degree of substitution and chemical structure of the substituents play an important role in the formation of the mesophase structures in the liquid crystals.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.170-174
• /
• 2008

Recently, a problem related to the thermal management in portable electronic and telecommunication devices is becoming issued. That is due to the trend of slimness of the devices, so it is not easy to find the optimal thermal management technology for the devices. From now on, a pressed circular type cooling device has been mainly used, however the cooling device with thin thickness is becoming needed by the inner space constraint. In the present study, the silicon and metal flat plate type cooling device with the separated vapor and liquid flow path was designed and fabricated. Through the experimental study, the normal isothermal characteristic by vapor-liquid phase change was confirmed and the cooling device with 70mm of total length showed 6.8W of the heat transfer rate within the range of $4{\sim}5^{\circ}C$/W of thermal resistance. In the meantime, the metal cooling device was developed for commercialization. The device was designed to have all structures of evaporator, vapor flow path, liquid flow path and condenser in one plate. And an envelope of that could be completed by combining the two plates of same structure and size. And the simplicity of fabrication process and reduction of manufacturing cost could be accomplished by using the stamping technology for fabricating large flow paths relatively. In the future, it will be possible to develop the commercialized cooling device by revising the fabrication process and enhancing the thermal performance of that.