• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.649-660
• /
• 2005

The effects of Lactobacillus buchneri 40788 and buffered propionic acid on preservation, intake and digestibility of alfalfa (Medicago sativa) and timothy (Phleum pratense) hay were investigated. During baling, forages were treated with L. buchneri 40788 (1.2${\times}$10$^6$ CFU/g) as a liquid (LLB) or as a granular preparation (GLB), with buffered propionic acid (10 mL/kg, BPA), or left untreated (control). Triplicate 500 kg round bales of each treatment were put up at two moisture levels for each forage: 17%${\pm}$0.33% and 20%${\pm}$0.30% for timothy and 17%${\pm}$0.20% and 19%${\pm}$0.27% for alfalfa (mean${\pm}$SD). Bales were sampled for chemical and microbiological analyses after 0, 30 and 60 d of storage. Compared to controls, all preservatives reduced (p<0.05) heating of both forages at all moisture levels with the exception of alfalfa baled at 19% moisture. After 60 d of storage, GLB reduced (p<0.05) moulds in 17% timothy hay as compared to other treatments, but at 20% moisture, moulds were reduced in LLB- and BPA-treated timothy as compared to controls. In alfalfa at 17% moisture, total bacteria were lower (p<0.05) in GLB-treated bales than LLB or control bales, but yeast and total bacteria were only reduced in BPA-treated alfalfa at 19% moisture. In situ DM disappearance of timothy (both moisture levels) and alfalfa (19% moisture level) increased (p<0.05) with LLB treatment compared to control. Digestibility of both forages did not differ (p>0.05) among treatments, however, voluntary DM intake of LLB-treated timothy (1.32 kg/d) was 22.3% higher (p<0.05) than control, and 14.1% higher than BPA-treated timothy. Treating timothy and alfalfa hay with L. buchneri 40788 or buffered propionic acid may improve the nutritive value of the hay when baled at 17 to 20% moisture.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.729-737
• /
• 2022

하반기에 발사 예정인 차세대소형위성2호(NEXTSat-2)에 탑재된 고상-액상 상변화물질 열제어장치(Phase Change Material Thermal Control Unit, PCMTCU)의 비행모델에 대한 위성 차원 열진공시험 결과로부터 융해-응고에 따른 작동과정을 분석하였다. 시험결과 PCM의 상변화는 발열부품의 온도 안정화에 기여함을 확인하였다. 시험에서 계측된 온도변화를 이용하여 타당한 정도의 정확도를 갖도록 PCMTCU의 열해석모델에 대한 보정을 수행하였다. 보정된 열해석모델로써 임무궤도의 정상 작동에 따른 PCMTCU의 주기적 온도변화를 예측하였으며, PCM의 액상분율로써 정량적 기여도를 평가하였다. 향후 임무궤도에서의 비행자료를 수신하여 PCMTCU의 우주 환경 검증을 완료할 예정이다.

• 한국식품저장유통학회지
• /
• 제16권6호
• /
• pp.924-928
• /
• 2009

녹차에 관한 최근까지의 연구결과에서, 녹차는 생리활성의 촉진작용뿐아니라 항암, 항산화, 고혈압 억제효과, 체중 조절 등 다방면의 약리효과를 보이는 것으로 보고되고 있다. 아울러, 녹차의 항균 및 항진균 작용에 관한 연구결과도 발표되고 있으며, 본 연구팀에 의해서도 녹차추출물의 항균작용을 확인한 바 있어, 본 연구에서는 탁월한 항균작용을 소유하고 있는 녹차분획물질을 분리하여 그 분자구조를 동정하는데 목적이 있다. 따라서, 녹차추출물에서 탁월한 항균력을 가지는 항균활성물질을 HPLC 분리방법 및 NMR 분석법으로 분리 동정한 결과, 각각 (-)-epicatechin gallate 및 (-)-epigallocatechin gallate로 확인되었다.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.27-35
• /
• 2009

LCD의 동화상 퍼짐(blur) 노이즈를 측정하고 그 특성을 평가하였다. 실험결과, 퍼짐 노이즈는 시선이 동화상을 추적하면서 이동할 경우에 발생하며 시선이 고정되어 있을 경우에는 발생하지 않았다. 그리고 화상 퍼짐에 의한 계조 감소는 선형적이며 속도 의존성이 있었다. 이 실험결과를 근거로 한 퍼짐 노이즈 시뮬레이터를 개발하고 퍼짐 노이즈를 시뮬레이션 한 결과, 화상의 이동속도가 빠를수록 퍼짐 노이즈가 증가하였으며 이것은 측정결과와도 일치하였다. 백라이트 점등비 제어에 의한 퍼짐 노이즈 특성을 시뮬레이션 한 결과, 점등비가 낮을수록 노이즈가 저감되나 백라이트의 점등 타이밍이 2개의 인접한 프레임에 걸쳐서 있으면 오히려 노이즈가 심해졌다. 또한 프레임을 120[Hz]로 배속시켜 구동하는 경우에는 기존의 두 화상 사이에 새로운 화상이 생김으로써 얻는 화상 이동속도의 감소가 퍼짐 노이즈를 저감시켰다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.50-58
• /
• 2016

한국형 발사체(KSLV-II) 추진제 공급시스템은 각 단에 위치한 추진제 탱크에 산화제와 케로신을 공급해주는 시스템이다. 발사체의 추진제 탱크를 안정적으로 충전하기 위해, 충전시나리오와 충전유량을 결정하였다. 다음으로 1D 유동 해석프로그램을 이용하여 추진제 공급시스템을 모델링 하였다. 1D steady state 해석을 통하여 각 시스템에서의 충전모드에 따른 밸브용량과 orifice 사이즈를 계산하였다. Steady state 결과를 이용하여 1D transient 해석을 수행하였다. 해석 결과 추진제가 각 추진제 탱크로 충전됨에 따라 탱크의 수두가 상승하여 충전유량이 감소하는 것으로 나타났다. 최종적으로 해석을 통해 제안된 충전시스템 모델이 요구되는 충전설계조건을 만족하는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.109-114
• /
• 2008

This paper presents the development status of a subscale precooled turbojet engine "S-engine" for the hypersonic cruiser and space place. S-engine employs the precooled-cycle using liquid hydrogen as fuel and coolant. It has $23cm{\times}23cm$ of rectangular cross section, 2.6 m of the overall length and about 100 kg of the target weight employing composite materials for a variable-geometry rectangular air-intake and nozzle. The design thrust and specific impulse at sea-level-static(SLS) are 1.2 kN and 2,000 sec respectively. After the system design and component tests, a prototype engine made of metal was manufactured and provided for the system firing test using gaseous hydrogen in March 2007. The core engine performance could be verified in this test. The second firing test using liquid hydrogen was conducted in October 2007. The engine, fuel supplying system and control system for the next flight test were used in this test. We verified the engine start-up sequence, compressor-turbine matching and performance of system and components. A flight test of S-engine is to be conducted by the Balloon-based Operation Vehicle(BOV) at Taiki town in Hokkaido in October 2008. The vehicle is about 5 m in length, 0.55 m in diameter and 500 kg in weight. The vehicle is dropped from an altitude of 40 km by a high-altitude observation balloon. After 40 second free-fall, the vehicle pulls up and S-engine operates for 60 seconds up to Mach 2. High altitude tests of the engine components corresponding to the BOV flight condition are also conducted.

• Safety and Health at Work
• /
• 제5권4호
• /
• pp.227-233
• /
• 2014

Background: The aims of this study were to determine hippuric acid levels in urine samples, airborne toluene levels, acute and chronic neurological symptoms, and to describe any correlation between urinary hippuric acid and airborne toluene. Methods: The hippuric acid concentration in the urine of 87 paint workers exposed to toluene at work (exposed group), and 87 nonexposed people (control group) was studied. Study participants were selected from similar factories in the same region. Urine samples were collected at the end of a shift and analyzed for hippuric acid by high performance liquid chromatography. Air samples for the estimation of toluene exposure were collected with diffusive personal samplers and the toluene quantified using gas-liquid chromatography. The two groups were also interviewed and observed about their work practices and health. Results: The median of the 87 airborne toluene levels was 55 ppm (range, 12-198 ppm). The median urinary hippuric acid level was 800 mg/g creatinine (range, 90-2547 mg/g creatinine). A statistically significant positive correlation was found between airborne toluene exposure and urine hippuric acid levels (r = 0.548, p < 0.01). Workers with acute symptoms had significantly higher hippuric acid levels than those who did not (p < 0.05). It was concluded that there was a significant correlation between toluene exposure, hippuric acid levels, and health (p < 0.001). Conclusion: There appears to be a significant correlation between workers exposure to toluene at work, their urine hippuric acid levels, and resulting symptoms of poor health. Improvements in working conditions and occupational health education are required at these workplaces. There was good correlation between urinary hippuric acid and airborne toluene levels.

• BMB Reports
• /
• 제56권3호
• /
• pp.190-195
• /
• 2023

We propose a novel blood biomarker detection method that uses miRNA super-resolution imaging to enable the early diagnosis of Alzheimer's disease (AD). Here, we report a single-molecule detection method for visualizing disease-specific miRNA in tissue from an AD mice model, and peripheral blood mononuclear cells (PBMCs) from AD patients. Using optimized Magnified Analysis of Proteome (MAPs), we confirmed that five miRNAs contribute to neurodegenerative disease in the brain hippocampi of 5XFAD and wild-type mice. We also assessed PBMCs isolated from the whole blood of AD patients and a healthy control group, and subsequently analyzed those samples using miRNA super-resolution imaging. We detected more miR-200a-3p expression in the cornu ammonis 1 and dentate gyrus regions of 3 month-old 5XFAD mice than in wild-type mice. Additionally, miRNA super-resolution imaging of blood provides AD diagnosis platform for studying miRNA regulation inside cells at the single molecule level. Our results present a potential liquid biopsy method that could improve the diagnosis of early stage AD and other diseases.

• Journal of Ecology and Environment
• /
• 제35권2호
• /
• pp.131-140
• /
• 2012

There are different types of compost used as soil conditioners and fertilizers. Plants can have different responses to different forms of compost. This field study was performed to examine the effects of different types of compost on growth factors of three dry rangeland species (Atriplex, $Atriplex$ $lentiformis$; Saltwort, $Seidlitzia$ $rosmarinus$; Haloxylon, $Haloxylon$ $persicum$) and soil properties. The experiment was conducted in the Fars Province of Iran during the year 2010-2011. Compost applications consisted of compost tea, solid compost (SC), solid and liquid mixture (MX) and no compost as the control. The study was a factorial experiment based on a randomized complete block design with 3 replications. The results showed that all the tested compost applications enhanced the growth traits of all three species. It was also demonstrated that the use of compost significantly increased the organic matter (1% probability level [PL]), nitrogen concentration (5% PL), phosphorous (5% PL) and potassium (5% PL) concentrations of the soil. The soil's pH level was unchanged (range, 7.3 to 7.6), and the sodium concentration was also significantly decreased (1% PL) by the use of compost. The higher responses were observed in canopy volume and soil sodium and the lower were observed in stem diameter and soil pH level. Among the three plants in the study, Atriplex showed the best response to the application of compost. Based on the results of this study, it can be recommended that the best compost application to increase growth and improve soil condition is the mixed compost (MX) for Atriplex and the SC for Saltwort and Haloxylon.

• 한국약용작물학회지
• /
• 제28권6호
• /
• pp.435-444
• /
• 2020

Background: As the Positive List System (PLS) is implemented in broad application to agricultural products, attention to the correct use of pesticides is also needed in the production of mulberry leaves and fruit. In this regard, three types of pesticides against mulberry popcorn disease were applied 2 - 3 times both in the field and greenhouses to prepare safety standards. Residual pesticide analysis was conducted on mulberry fruits and leaves. Methods and results: Three pesticieds, thiophanate-methyl, thiophanate-methyl·triflumizole and fluopyram registered as PLS pesticides for mulberry popcorn disease, were sprayed in the Wanju and in Buan regions, after which residual pesticide analysis was conducted using high-performance liquid chromatography (HPLC). As three pesticieds were either undetected or below the permissible level in mulberry fruit, demonstrating that they were suitable for safe spraying. However, 5.6 mg/kg of thiophanate-methyl was detected in the greenhouse after three application, which was slightly above maximum residue limit (MRL). Furthermore the level of thiophanate-methyl·triflumizole was higher than 0.2 mg/kg ("Gwasang No. 2" variety, spraying twice) or similar to 0.09 mg/kg ("Daesim" variety, spraying thrice) the permissible level (0.1T mg/kg) as the thiophanate-methyl was detected in mulberry leaves in the greenhouse. Conclusions: The spraying frequency for controlling mulberry popcorn disease in greenhouses should be limited to two times or less, especially when mulberry leaves are treated with thiophanate-methyl·triflumizole careful consideration is required if the leaves are to be used as food materials.