• Journal of the Korean Society of Visualization
• /
• v.21 no.3
• /
• pp.7-14
• /
• 2023

In this study, we investigated the freezing delay time on surfaces with different patterns under -30° conditions through visualization experiments. Among various pattern structures, we fabricated the shape and surface of liquid from the spacing using circular filaments and hole structures. Additionally, using a high-speed camera, we visualized the freezing scenes, enabling us to obtain freezing images and measure the freezing time of the liquid. For each structure, the contact angle and solid fraction of the surface varied. We observed that the freezing delay time was longest when the contact angle was largest and the solid fraction was smallest within the experimental results. We analyzed the variation in anti-icing time using the heat exchange equation between the patterned surface and the liquid.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.306-309
• /
• 2007

PXLM(Phosphor based x-ray light modulator) has a combined structure by phosphor, photoconductor, and liquid crystal and it can realize x-ray image of high resolution in clinical diagnosis area. In this study, we fabricated a photoconductor and investigated electrical and optical properties to confirm application possibility of radiator detector of PXLM structure. As photoconductor, amorphous selenium(a-Se), which is used most in DR(Digital radiography) of direct conversion method, was used and for formation of thin film, it was formed as $20{\mu}m-thick$ by using thermal vacuum evaporation system. For a produced a-Se film, through XRD(X-ray diffraction) and SEM(Scanning electron microscope), we investigated that amorphous structure was uniformly established and through optical measurement, for visible light of 40 $0\sim630nm$, it had absorption efficiency of 95 % and more. After fabricated a-Se film on the top of ITP substrate, hybrid structure was manufactured through forming $Gd_2O_3:Eu$ phosphor of $270{\mu}m-thick$ on the bottom of the substrate. As the result to confirm electrical property of the manufactured hybrid structure, in the case of appling $10V/{\mu}m$, leakage current of $2.5nA/cm^2$ and x-ray sensitivity of $7.31nC/cm^2/mR$ were investigated. Finally, we manufactured PXLM structure combined with hybrid structure and liquid crystal cell of TN(Twisted nematic) mode and then, investigated T-V(Transmission vs. voltage) curve of external light source for induced x-ray energy. PXLM structure showed a similar optical response with T-V curve that common TN mode liquid crystal cell showed according to electric field increase and in appling $50\sim100V$, it showed linear transmission efficiency of $12\sim18%$. This result suggested an application possibility of PXLM structure as radiation detector.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.202-204
• /
• 2004

We study theoretically optical properties of thin layered stacked monochrome cholesteric liquid-crystal displays. Thin thickness of the layers (${\sim}1{\mu}m$) allows us appreciably to reduce driving voltage and use such displays in smart cards. Good selective reflection is achieved due to stacked structure. Dependence of the reflectivity of this type of displays on the quantity of the layers, their thickness, and liquid crystal birefringence is investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.600-603
• /
• 2003

VA-LCDs is widely used for recent LCD productions owing to wide viewing angle characteristics with an unusually high contrast ratio. To apply for VA-LCDs, the novel homeotropic alignment materials were synthesized, which have the liquid crystal molecule as a side chain at aromatic diamine in a polyimide structure. These polyimides generated a high pretilt angle $90^{\circ}C$. In this paper, the synthesis and alignment properties of new homeotropic alignment materials will be discussed..

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.179-181
• /
• 1963

The partition function of liquid halogens is developed applying the significant liquid structure theory proposed by H. Eyring and co-workers. The parameters in the partition function are determined by triple point technique which was proposed by the authors in the previous paper, and also the thermodynamic properties and the surface tension are calculated by the method therein.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.166-168
• /
• 2009

We proposed a transflective liquid crystal display (LCD) with high aperture ratio using an electrophoretic particle layer (EPL). The transflective LCD consisted of the stacked LC layer and EPL which was acted as a switchable mirror under in-plane electrode structure. Without separation of reflective part and transmissive part in one pixel, a modeselectable display device can be obtained.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.33-36
• /
• 1995

Macrocyclic ligands have been studied as cation carriers in a supported liquid membrane system. Cd2+ has been transported using nitrogen substituted macrocycles as carriers and several divalent metal ions (M2+=Zn, Co, Ni, Cu, Pb, Mg, Ca, and Sr) have been transported using DBN3O2, DBN2O2and PolyNtnoen as carriers in a supported liquid membrane system. Competitive Cd2+-M2+ transport studies have also been carried out with the same system. Ligand structure, stability constant, membrane solvent and carrier concentration are also important parameters in the transport of metal ions.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1109-1111
• /
• 1996

The Podand Ⅰ (Figure 1) has been studied as cation carrier in a bulk liquid membrane system. Ag+ and some other transition metal ions (M2+=Cu, Ni, Co, Zn, and Cd) have been transported using the podand as carrier in a bulk liquid membrane system. Studies on the transport of equimolar mixtures of two or three competing components have also been carried out with the same system. Ag+ exhibited a higher transport rate than the other M2+ in the competitive experiments. Ligand structure and the equilibrium constant for complex formation are important parameters in the transport of the metal ions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.111-115
• /
• 1998

We investigated the stability of all-trans-retinol on the liquid crystalline O/W emulsion composed of mainly alkyl polyglycerine, alkyl polyglucose and glycerine, and compared the activity of all-trans-retinol in the various forms of liquid crystal. Under certain conditions, novel liquid crystalline gel was formed around oil droplets, and layers of this liquid crystalline gel were very wide and rigid. (SWLC; Super Wide Liquid Crystal) SWLC was very helpful to stabilize retinol in O/W emulsion. After storage at 45 C for 4 weeks, all-trans-retinol in O/W emulsion composed of SWLC retained above 85% of the activity upon HPLC analysis, whereas those within no liquid crystalline emulsion gave 47% and normal liquid crystalline emulsion composed of fatty alcohols gave 40 60%. Retinol in oil phase is nealy insoluble in pure water, but in cosmetic emulsion systems can be slightly solubilized into water because emulsifiers and polyols in emulsion systems function as solubilizers. In this case, water in outer phase acts as a media for oxygen transporation$.$and thus destabilizes retinol. As a result, retinol in O/W emulsion has a tendency to become unstable. SWLC surrounding oil droplet which contains retinol is wide and rigid, therefore reduces contact between inner phase and outer phase To make SWLC, properties of emulsifiers are very important phase transition temperature should be high, and the structure of surfactants should be bulky, and their ratio should be suitable to make rigid and wide liquid crystalline gel layer in order to reduce contact between retinol in inner phase and water in outer phase.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.375-384
• /
• 2015

Recently, construction sites of offshore wind power tend to move from shallow water to deep water. From this tendency, the research on the support structure of offshore wind power in deep water will be a key issue. In this study, precast concrete block and suction pile are applied to existing jacket structure. In order to reduce the vibration of this structure, the tuned liquid damper is also applied in the precast concrete block. The applicability of the suggested jacket structure is evaluated by finite element analysis. And the vibration tends to decrease about 5%, when the tuned liquid damper is applied.