• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.867-873
• /
• 1995

This study was done ot investigate the effect of chronic alcohol feeding and acetylaminofluorene(2-AAF) treatment on hepatic mitochondrial ATPase activity andmembrane lipid composition. Male Sprague-Dawley rats, weighing 120~125g, were fed for 6 weeks on a liquid diet containing 35% of calories as ethanol. After 4 weeks of experiment diet feeding, 2-AAF(100mg/kg body weight) was injected twice a week intraperitoneally. Body weight and percent liver weight per body weight were significantly changed by ethanol feeding. Hepatic mitochondrial ATPase activity significantly decreased by ethanol feedings but not by 2-AAF treatment. In comparison to control, the ATPase activity of ethanol-AAF group decreased 29.3%. Since phospholipid(PL) content of mitochondria has an interaction effect between ethanol and 2-AAF treatment, 2-AAF treatment significantly increased phospholipid content in only ethanol fed group. Total cholesterol(C) level of mitochondria significantly increased by ethanol feeding. Consequently C/PL ratio of ethanol group was significantly higher than that of control group. The analysis of mitochondrial PL composition showed that cardiolipin(CL) significantly increased by 2-AFF treatment in control group. Phosphatidyl choline(PC) significantly increased by ethanol feeding, whereas PC significanlty decreased and phosphatidyl ethanolamine(PE) significantly increased by 2-AAF treatment. 2-AAF treatment also showed a significant increase in PE/PC ratio. Fatty acid patterns of mitochondria were also changed by either ethanol or 2-AAF although the severity of the changes was not great. These data suggest that the reduced mitochondrial ATPase activity in ethanol-AAF group may be a consequence of a changes in mitochondrial membrane lipid composition such as PE/PC ratio, C/PL ration and fatty acid patterns.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1183-1196
• /
• 2018

Objective: This study ascertained effects of roughage quality, period of day at meal termination and time lapse after feeding on digesta load in the rumen. Methods: Veld hay was untreated (poor roughage quality, PRQ), improved (improved roughage quality, IRQ) by treating with urea or semi-improved by spraying with urea (semi-improved roughage quality, SIRQ). Experiment 1a used four rumen fistulated sheep to determine in-sacco degradability. Twelve sheep ($56.3{\pm}4.59kg$) were blocked by weight and randomly allocated to IRQ (n = 6) and PRQ (n = 6) to determine solid and liquid passage rates. In experiment 1b, nine sheep ($37.6{\pm}9.34kg$) were blocked by weight and randomly allocated to IRQ (n = 4) and PRQ (n = 5) to determine digestibility. Sixteen sheep ($36.47{\pm}9.46kg$) were blocked by body weight and randomly allocated to IRQ (n = 8) and PRQ (n = 8). Two sheep were slaughtered for each sampling time in each treatment (IRQ and PRQ) at 0, 6, 12, and 24 h after feeding to determine rumen load. In experiment 2, eighteen goats ($25.4{\pm}9.08kg$) were blocked by weight and randomly allocated to IRQ (n = 6), SIRQ (n = 6), and PRQ (n = 6). Then all 18 goats were slaughtered soon after meal termination in the morning; afternoon and evening to determine the effect of period of day on rumen fill. Results: Rate of degradation and effective degradability were enhanced by improvement of roughage quality. Roughage quality had no effect on digestibility, but digestibility was higher in goats than sheep. Fractional passage rate of particles was higher for IRQ than PRQ, but similar for liquids. Digesta fractional clearance rates at 24 h after feeding were 0.018/h (IRQ) and 0.006/h (PRQ). Period of day had an influence on rumen load. Neutral detergent fibre load for goats were above 2.03 kg/100 kg body weight for all diet treatments. Conclusion: Following starvation, passage rate had negligible effects on emptying of rumen load.

• Journal of ILASS-Korea
• /
• v.1 no.1
• /
• pp.63-75
• /
• 1996

The purpose of this study is to investigate the break-up characteristics by taking advantage of a two-phase coaxial nozzle. Air and water are utilized as working fluids and the mass ratio air/water has been controlled to characterize the atomization, diffusion and development of mixing process. By way of a photographic technique, conventional developing structures and diffusion angles have been analyzed systematically with variations of mass ratios. The turbulent flow components of the atomized particles were measured by a two channel LDV system and the data were treated by an on-lined measurement equipment. According to the photographic results the spreading angles decreased because the axial inertia moment was relatively higher than the lateral one with respect to the increase of mass ratio. It is found the jet flow diffuses linearly in a certain limit region while the atomizing characteristics, in terms of the distributions of particle diameters did not show particular differences. It may be expected that these fundamental results can be used as reference data in studying the atomization, breakup and diffusions.

• Journal of Nutrition and Health
• /
• v.40 no.5
• /
• pp.413-418
• /
• 2007

The present study was designed to observe the effect of chronically ingested ethanol on the level of fatty acid ethyl esters (FAEEs), which is a non-oxidative metabolite of ethanol metabolism in tissues, and its correlation to the status of oxidative stress in rats. Forty male Sprague Dawley rats weighing 145 - 155 g were divided into 2 groups, Control and EtOH. All rats were fed Lieber-DeCarli liquid diet for 4 weeks by pair-feeding. An isocaloric maltose dextrin was added in replace of 50 g ethanol (36%kcal) in the control diet. Chronically ingested ethanol significantly increased the content of FAEEs in pancreas and liver, but not in brain. The level of 2-thiobarbituric acid reactive substances (TBARS) was significantly increased, but ${\alpha}-tocopherol$ level was significantly decreased in pancreas and liver. However, the levels of TBARS and ${\alpha}-tocopherol$ in brain were not significantly affected by ethanol ingestion. Therefore, chronically ingested ethanol might cause tissue damage by increasing the levels of FAEEs and TBARS and dissipating more ${\alpha}-tocopherol$ in tissues.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.854-856
• /
• 2011

A vent relief valve for oxidizer tank has been designed for liquid propellant feeding system of the space launch vehicle. The vent relief valve ensures oxidizer tank ventilation during filling and its protection from overpressure after filling. Tank ventilation during filling is ensured by vent valve and tank protection is ensured by combined operation of relief valve and vent valve. Numerical analysis predicted that pneumatic behavior and dynamic characteristics met the valve requirements. After manufacturing the prototype model, we have been conducting the tests to evaluate the performance of the vent relief valve.

• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.44-53
• /
• 1991

The proper feeding conditions for thin Al-Alloy (AA336, JIS AC8A) castings in permanent mold were investigated to eliminate microshrinkage porosity. 5mm-thick plates (200mm long, 60mm wide) were cast with increasing padding taper from 0 to 5% under different conditions : (1) constant mold temperature of $350^{\circ}C$, (2) continuous production with uniform mold thickness (10mm), (3) continuous production with a negative taper of 2.5% in mold thickness (thickness decreasing in direction to riser). The test casting were machined off to the midplane and the shrinkage porosity was examined visually. The critical padding taper which can just eliminate the shrinkage porosity was determined for each condition, i.e. : (1) 4.5% at the constant mold temperature, (2) 3.5% for continuous production with the uniform mold thickness (3) 1.5% for continuous production with the taper in mold thickness. A computer simulation by a finite difference analysis program was applied to the test casting. The liquid fraction gradient (LFG) and the temperature gradient divided by the square root of the cooling rate (G /SR) were calculated at the end of solidification and compared with the shrinkage porosity area in the castings. For the case of constant mold temperature, LFG is a better parameter to predict shrinkage porosity than G /SR and its critical value is around 11%/cm. But for the case of continuous production, neither LFG nor G /SR could be a reliable parameter. The experimental results about the critical padding taper are of practical interest for designing permanent molds and castings. The computer simulation results stimulate further research to be directed on the prediction of centerline microshrinkage porosity in continuous production.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.699-704
• /
• 2001

The purpose of this study is to present the atomization characteristics of 2-phase internal mixing nozzle. The obtained results are considered as the essential information of understanding the spray characteristics from the nozzle exit of an aerated nozzle. In this study, SMD and AMD are mainly measured at the distance of Z=10, 20, 50, 80, 120 and 170mm from the nozzle tip. The liquid flow rate was kept at 1.8g/s and the air feeding pressure was changed from 10kpa to 100kpa increasingly. The analysis of the acquired data was performed by 2-D PDPA system and in order to get the realibility, the number of data used in calculating the SMD & AMD were 10,000 samples.

• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.61-70
• /
• 1999

This study is concerned with assessment of diethylnitrosamine(DEN) induced liver cell carcinogenesis by measurement of changes preceding the development of neoplasms. Therefore, it was undertaken to investigate the changes of liver-specific enzyme activities in rats (Sprague-Dawley) by ad libitum feeding of DEN. And also, as another objective index in urine, the level of urinary biopterin was measured by high performance liquid chromatography(HPLC) method. The results were as follows ; 1. Minor behavioral change, brittleness of hair and decreased amount of water and diet intake were observed in rats 7 weeks after DEN administration. 2. The body and liver weights were significantly(p<0.05) decreased in rats 11 weeks after DEN administration. 3. The ratio of liver weight to body weight was rather stable and not significantly decreased in the all treatment groups. 4. The liver specific enzyme activities(AST, ALT,$\gamma$-GTP) were significantly(p<0.05) increased in all treatment groups compared to control group. 5. Compared to normal level, urine biopterin level was significantly (p<0.05) increased in all treatment groups(p<0.05). In conclusion, this result confirmed that the DEN was one of the potent hepatocarcinogens. In experimental model of rats exposed to DEN, the results indicated that values of liver specific enzyme activities(AST, ALT, $\gamma$-GTP) and urine biopterin level could be useful complementary tumor indices.

• Journal of Korea Foundry Society
• /
• v.23 no.5
• /
• pp.244-250
• /
• 2003

The aim of this study is fabricating of composite filler metal (CFM) by a combination of selective laser sintering (SLS) of stainless steel powders (RapidSteel $2.0^{TM}$ and liquid phase infiltration of Ag-28 wt.%Cu alloy. Porous stainless steel body with inter-connected pore channels was fabricated by SLS, binder decomposing and densification processes. By the direct contact infiltration, the narrow inter-particle channels of the porous body were completely filled with the Ag-28 wt.%Cu alloy infiltrant. During infiltration, the dissolved elements of Fe, Ni and Cr from the porous body were solved into copper solid solution phases, which consist of eutectic structure of composite metal matrix. The S10C/CFM/S10C joints, which have narrow clearance gaps between them up to 10 micrometers, were joined successfully by self-feeding of filler metal from the matrix of CFM. The CFM kept its original thickness and microstructure after brazing. The tensile strength of brazed specimen was higher than 30 kgf/$mm^2$ and showed a typical ductile fracture mode in the CFM.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.3
• /
• pp.347-356
• /
• 2016

This study analyzed the antioxidant properties of Equisetum arvense and its effects on serum factor levels in mice fed a high-fat diet. The aim was to establish a new effective resource for biologically active materials. E. arvense stem and root extracts were obtained using deionized water at $95^{\circ}C$, and 70.5% ethanol at $85^{\circ}C$. These extracts were used to analyze the total phenolic compounds and antioxidant (ABTS, DDPH, and FRAP) activities. The effects of prepared ground samples were evaluated by feeding them to mice. E. arvense extracts showed strong antioxidant effects. The caffeic acid content was highest in the 70.5% ethanol extract of the vegetative stem, as determined by high-performance liquid chromatography. The blood concentrations of insulin and leptin were significantly lower in mice fed a high-fat diet supplemented with extracts of the root, reproductive stem, and vegetative stem of E. arvense than in mice fed only a high-fat diet. These results suggest that the polyphenolic compounds in E. arvense extracts exert various antioxidant effects. The stems and root of E. arvense can lower the blood levels of insulin and leptin, even after consumption of a high-fat diet.