• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.358-366
• /
• 2006

Thermotropic liquid crystal polymer (TLCP)-reinforced poly(butylene terephthalate) (PBT) composites were prepared by melt processing. The improvement in the mechanical properties and the processability of the PBT/TLCP composites was attributed to the reinforcing effect by TLCP phase and its well distribution in the PBT matrix. X-ray diffraction results demonstrated that a slow cooling process leads to the thicker lamellar structures and the formation of more regular crystallites in the composites. The incorporation of TLCP improves not only the tensile strength and flexural modulus but also the heat distortion temperature (HDT) of the PBT/TLCP composites. The HDT values of the composites were dependent on TLCP content. The improvement in the HDT values of the PBT/TLCP composites may be explained in terms with the increased flexural modulus, the development of more regular crystalline structures, and the enhancement of the ability of the composites to sustain the storage modulus by TLCP phase. In addition, the simple additivity rule makes it possible to predict the HDT values of the PBT/TLCP composites.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.3
• /
• pp.425-425
• /
• 1995

The interaction and detergency between liquid oily soil and surfactant solution were studied by the mechanism of formation of liquid crestal(LC). Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodgily sulfate (SDS) as a surfactant. The results were as follows: In the phase diagram of SDS/oil/Water system, the area of liquid crystalline phase region were in the order of SDS/trillion/water< SDS/oleic acid/water< SDS/mixture of trillion and oleic acid/water. In the system of oleic acid alone or mixture of trillion and oleic acid contacted with SDS solution, the LC phase was formed right after or after some time with SDS concentration. But in a case of trillion alone, the LC phase was not formed although the concentration of the SDS solution was relatively high. The detergency of model oily soils were seldom changed with temperature, and the detergency of oleic acid was very high compared to that of the trillion. The detergency of mixed soil was improved with the increase of the ratio of oleic acid in the mixture.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.3
• /
• pp.426-433
• /
• 1995

The interaction and detergency between liquid oily soil and surfactant solution were studied by the mechanism of formation of liquid crestal(LC). Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodgily sulfate (SDS) as a surfactant. The results were as follows: In the phase diagram of SDS/oil/Water system, the area of liquid crystalline phase region were in the order of SDS/trillion/water< SDS/oleic acid/water< SDS/mixture of trillion and oleic acid/water. In the system of oleic acid alone or mixture of trillion and oleic acid contacted with SDS solution, the LC phase was formed right after or after some time with SDS concentration. But in a case of trillion alone, the LC phase was not formed although the concentration of the SDS solution was relatively high. The detergency of model oily soils were seldom changed with temperature, and the detergency of oleic acid was very high compared to that of the trillion. The detergency of mixed soil was improved with the increase of the ratio of oleic acid in the mixture.

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.202-207
• /
• 2007

High-Quality 1-Dimensional InN single crystalline have been grown by Halide Vapor-Phase Epitaxy on the Au catalyst coated Si substrate using the vapor-liquid-solid growth mechanism. We have been grown 1-dimension InN nanowires having controlled the growth conditions for substrate temperature and gases flow rate. The grown InN nanowire of characteristics for morphologies, crystal structure, and element analysis were carried out by SEM, HR-TEM, and EDS respectively. And the defects of InN crystalline were analyzed by indexing of selective area diffraction pattern with attached HR-TEM. We have successfully obtained the defect-free 1-dimensional InN single crystalline nanowire at the atmosphere pressure.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.786-791
• /
• 2001

$\alpha$,$\omega$-Bis(4-glycidyloxybenzylidene-4-aminophenyl)methane (BGBAM) was synthesized from the initial materials, 4-hydroxylbenzaldehyde (HBA), 4,4'-methylenedianiline (MDA) and epichlorohydrin. The DSC trace for BGBAM shows two endotherms associated with the liquid crystalline phase transition around $104.2^{\circ}C$ and the isotropic transition around $171.2^{\circ}C$, and it also has a broad exotherm in the range of $178~300^{\circ}C$ due to the anionic homopolymerization of BGBAM. DSC curve for the curing of BGBAM with hexamethylene diamine (HMD) shows an endothermic peak around $93^{\circ}C$ attributed to the melting of BGBAM. It also has three exothermic peaks around $128.4^{\circ}C$ and $180.2^{\circ}C$ associated with the epoxide-amine reaction and weak peak in the range of $200~263^{\circ}C$ related to the anionic homopolymerization between the unreacted epoxide groups. The activation energy values of cure reaction by Kissinger method are 66.5, 67.3 and 90.6 kJ/mol for $T_{pl},\; T_{p2}\; and \;T_{p3},\; respectively$. The kinetic parameters by isoconverional method are similar value to those from Kissinger method.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.19-29
• /
• 2005

Polymer composites based on a thermotropic liquid-crystalline polymer (TLCP) and poly(butylene terephthalate) (PBT) were prepared using a melt blending process. Polymer composites consisting of bulk cheap polyester with a small quantity of expensive TLCP are of interest from a commercial perspective. The interactions between the PBT chains and the flexible poly(ethylene terephthalate) (PET) units in the TLCP phase resulted in an improvement in the compatibility of PBT/TLCP composites. TLCP droplets deformed and fragmented into smaller droplets in the PBT/TLCP composites, which resulted in TLCP fibrillation through the effective deformation of the TLCP droplets. The nucleation activities of the PBT/TLCP composites increased by adding even a small amount of the TLCP component.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.108-115
• /
• 2006

A series of thermotropic polyurethanes containing biphenyl units was synthesized by polyaddition reaction of diisocyanates such as 2,6-tolylene diisocyanate, 2,5-tolylene diisocyanate, 2,4-tolylene diisocyanate, 1,4-phenylene diisocyanate, and hexamethylene diisocyanate with 4,4'-Bis(9-hydroxynonoxy)biphenyl (BP9). 4,4'-bis(9-hydroxynonoxy)biphenyl exhibited a smectic type mesophase. Mesophase was found for all synthesized liquid crystalline polyurethanes except 1,4-PDI/BP9 based polyurethane. Structures of the monomer and the corresponding polymers were identified using FT-IR and $^1H-NMR$ spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry and optical polarizing microscopy.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.884-889
• /
• 1998

Amorphous silicon films of large area have been crystallized by a line shape excimer laser beam of one dimensional scanning with a gaussian profile in the scanning direction. In order to characterize the crystalline phase transition of thickness variables in excimer laser annealing(ELA), angle wrapping method was used. And also to characterize the residual stresses of crystalline phase transition in the case of angle wrapped-crystalline silicon on corning 7059 glass, polarized raman spectroscopies were measured at various laser energy density and substrate temperature. The residual stress varies from $9.0{\times}10^9$ to $9.9{\times}10^9$, and from $9.9{\times}10^9$ to $1.2{\times}10^10$dyne/${cm}^2$ of the substrate temperature at room temperature and varies from $8.1{\times}10^9$ to $9.0{\times}10^9$, and from $9.0{\times}10^9$ to $9.9{\times}10^9$dyne/${cm}^2$ of the substrate temperature at $400^{\circ}C$ as a function of direction from surface to substrate. According to the direction from the surface in liquid phase to the interface and from the interface to near the substrate in solid phase of recrystallized Si thin film, respectively. Thus, the stress is increased from(Liquid phase to solid phase) with phase transition.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.603-609
• /
• 2010

This paper aims to investigate the lyotropic behaviors of DSPC and CER3 when they are swollen by GLY as a solvent. The analyses were carried out on DSC, XRDs, PM, and Cryo-SEM. CER3 which has its high crystallinity and structural similarity with DSPC was well arranged up to 7.0 wt% in comparison to 20 wt% DSPC without any separation, but it was separated from the liquid crystalline (LC) phase to form another crystalline phase with the expression of its characteristic peak in XRDs and eutectic thermal behavior in DSC. Introducing CER3, two types of patterns were shown in XRD spectra; one is SPP expressed in a normal LC and another is LPP expressed in human skin SC. Therefore, it was confirmed that the incorporation of CER3 makes LC structure more similar to human skin. In Cryo-SEM study, it was shown that CER3 makes LC structure thicker and denser.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.1021-1030
• /
• 2007

The effects of the creamide III (CER3) and cholesterol (CHOL) on the structure of a non-hydrous distearoyl phosphatidylcholine (DSPC)-based lamellar liquid crystal (LC) hydrated by only propylene glycol (PG) without water were investigated by differential scanning calorimetry (DSC), X-ray diffractions (XRDs), and polarized microscope (PM). As soon as CER3 was incorporated into the lamellar phase, the characteristic LPP was appeared as well as the characteristic SPP, and the formation of separated CER3 crystalline phase was observed depending upon the increase of CER3 content by XRDs. Also, by DSC, it was shown that the increase of CER3 made the monotectic thermal transition be changed to the eutectic thermal transition which indicates the formation of separated CER3 crystalline phases and the main transition temperatures (Tc1) to be gradually decreased and the enthalpy change (ΔH) to be linearly increased. Incorporating CHOL, the formation of LPP and SPP showed almost similar behaviors to CER3, but incorporating small amounts of CHOL showed the characteristic peaks of CHOL which meant the existence of crystalline CHOL phase due to the immiscibility of CHOL with DSPC swollen by PG differently from CER3, and increasing CHOL made the intensity of the 1st order diffraction for LPP weakened as well as the intensities of the characteristic diffractions for DSPC. Also, in the results of DSC, it showed more complex thermal behaviors having several Tc than CER3 due to its bulky chemical structure. In the present study, the inducement of CER3 and CHOL as other lipids present in human stratum corneum (SC) into a non-hydrous lamellar phase is discussed in terms of the influence on their structural and thermal transition.