• Carbon letters
• /
• 제1권1호
• /
• pp.1-5
• /
• 2000

The effect of surface free energy on the positive temperature coefficient (PTC) of carbon black/thermoplastic resin composites was investigated. The thermoplastic resins such as EVA, LDPE, LLDPE and HDPE were used with the addition of 30 wt.% of the carbon black. The surface free energy of the composites was studied in the context of two-liquid contact angle measurements, i.e., deionized water and diiodomethane. It was observed that the resistivity on PTC composites Was greatly increased near the crystalline melting temperature, due to the thermal expansion of polymeric matrix. From the experimental results, it was proposed that the decrease of surface free energy induced by interactions between carbon black surfaces and polymer chains is an important factor to the fabrication of a PTC composite made of carbon black and polymeric matrix.

• Elastomers and Composites
• /
• 제26권4호
• /
• pp.296-303
• /
• 1991

Surface of crystalline silica was sequentially reacted with silane(A 187), liquid $rubber(CTBN{\times}8)$, and vinyl monomer(GMA) in existence of TEA(triethylamine) or BPO(benzoyl peroxide). It was mixed with epoxy resin at a ratio $0{\times}60%$ (vol. % ) of total component. For mixtures, viscous properties were investigated experimentally. 1) Coating ratio depended on pH of mixture and quantity of catalyst. 2) Treated silica represented lower viscosity than untreated. 3) Thixotropic index represented best at silica_content $15{\sim}23%$ and showed more large deviation over $120^{\circ}C$. 4) Relative viscosity followed kernel's at $0{\times}10%$ of silica content and get out of Mooney's at more than 15%.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.83-86
• /
• 2003

YBa$_2$Cu$_3$$O_{7-x}$ thin films for coated conductor application were deposited on a MgO single crystalline substrate by a metal organic chemical vapor deposition (MOCVD) system of a vertical type using a single liquid source. The film uniformity was enhanced by controlling the gas shower head structure, the distance between the shower head and substrate, and the rotation of the substrate. The source mole ratio of Y(thd)$_3$: Ba(thd)$_2$: Cu(thd)$_2$ was changed for obtaining stoichiometric film. The phase formation, crystal orientation, surface morphology and film composition were investigated with different source mole ratios, and the critical temperature (T$_{c}$) was measured.red.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.307-307
• /
• 2003

Strategies to make finished products more stable and efficacious can take advantage of formulation technologies- ingredients and techniques - to improve their delivery into the skin by both enhanced penetration and delayed release. Nanometer range particles and emulsion droplets can be formed with a selection of either silicone copolyol or conventional organic surfactants and dispersion shear rates sufficient to generate stable submicron droplets. By incorporating these into systems with biomimetic liquid crystalline gel networks in either simple or multiple phase emulsions the skin delivery can be enhanced as shown in tape stripping experiments. Such systems can stabilize labile actives, such as Vitamin C and retinol, and aid delivery. Laboratories in U.S and Europe investigated actives including green tea polyphenols, salicylic acid and methyl and benzyl nicotinate.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.336-340
• /
• 2002

Pure and nano-sized $TiO_2$ and $CaTiO_3$ powders were fabricated by a polymeric steric entrapment route and planetary milling process. An ethylene glycol was used as a polymeric carrier for the preparation of organic-inorganic precursors. Titanium isopropoxide and calcium nitrate were dissolved in liquid-type ethylene glycol without any precipitation. At the optimum amount of the polymer, the metal cations were dispersed in solution and a homogeneous polymeric network was formed. The dried precursor ceramic gels were turned to porous powders through calcination process. The porous powders were crystallized at low temperatures and the crystalline powders were planetary milled to nano size.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.571-574
• /
• 2000

In this study, Tin oxide thin film for secondary battery was deposited on Pt/Ti/Si(100). It was fabricated by r.f. reactive sputtering with Tin metal target. At constant power (130W), pressure (Base 5$\times$10$^{-6}$ Torr, working 5$\times$10$^{-3}$ Torr) and at room temperature, it was fabricated by Ar/O2 gas ratio. After deposition, we got AFM & SEM to investigated surface of thin films and had XRD to find crystalline of thin films. Charge/discharge characteristics were carried out in 1M LiPF$_{6}$ , EC:DMC = 1:1 liquid electrolyte using lithium metal at room temperature.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.1-7
• /
• 1996

Mesogenic unit를 포함하고 있지 않는 1,4-phenylene diisocyanate, 2,6-bis(5-hydroxypentoxy)naphthalene, 1,4-bis(5-hydroxypentoxy)benzene을 重附加反應을 시킨 結果 生成된 co-polyurethane은 液晶性을 나타내었다. copolyurethane의 熱的 性質과 構造確認을 위하여 DSC, 編光顯微鏡, TG 및 FT-IR, $^{1}$H-NMR로 測定하였다. DSC 測定結果 Tm 및 Ti가 대부분 明確의 나타내었다. 특히 液晶 範圍는 copolyurethane은 homopolyurethane보다 약간 넓은 範圍에서 液晶性을 나타내었다. 예를 들면 copolyurethane(60/40) 및 home-polyurethane(0/100) 의 液晶 範圍는 각각 2$0^{\circ}C$ 및 11$^{\circ}C$이다. 이러한 것은 homopolyurethane이 copiktyretgabe보다 熱的 安定性이 적다는 것을 나타낸다. 그리고 TG의 測定에서도 homopolyurethane(100/0) 및 copolyurethane이 熱的으로 安定하다는 것을 알았다. 예를 들면 homopolyurethane(100/0) 및 copolyurethane(80/20)에서의 5%에서의 TG 測定結果 각각 312$^{\circ}C$ 및 327$^{\circ}C$였다. 이러한 結果는 copolyurethane이 homopolyurethane보다 分子間 水素結合의 影響으로 熱的 安定性을 가져오는 것을 確認 할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.550-554
• /
• 2013

Carbon nanotubes (CNT) / polyvinylidene fluoride (PVDF) piezoelectric composite films for nanogenerator devices were fabricated by spray coating method. When the CNT/PVDF mixture solution passes through the spray nozzle with small diameter by the compressed nitrogen gas, electric charges are generated in the liquid by a triboelectric effect. Then randomly distributed ${\beta}$ phase PVDF film could be re-oriented by the electric field resulting from the accumulated electrical charges, and might be resulted in extremely one-directionally aligned ${\beta}$ phase PVDF film without additional electric field for poling. X-ray diffraction patterns were used to investigate crystal structure of the CNT/PVDF composite films. It was confirmed that they revealed extremely large portion of the ${\beta}$ phase PVDF crystalline in the film. Therefore we could obtain the poled CNT/PVDF piezoelectric composite films by the spray coating method without additional poling process.

• 한국고분자학회지:고분자과학과기술
• /
• 제25권3호
• /
• pp.194-200
• /
• 2014

• Bulletin of the Korean Chemical Society
• /
• 제6권1호
• /
• pp.40-45
• /
• 1985

The thermal and optical properties of two new series of thermotropic, liquid crystalline compounds were studied by differential scanning calorimetry and on the hot-stage of a polarizing microscope. The first series contained two identical mesogenic units, 4-(p-phenylbenzoyloxy) benzoate moieties, at both ends of the polymethylene spacer of varying lengths and the second series, mesogenic units with different substituents and the hexamethylene group as the central spacer. A thermodynamic analysis of the phase transitions of the compounds was made and the results were discussed in relation to their chemical structures.