• 한국추진공학회지
• /
• 제14권6호
• /
• pp.60-68
• /
• 2010

본 연구에서는 팁 형상이 가스터빈 블레이드의 팁 열전달에 미치는 영향을 알아보기 위하여 선형 캐스케이드의 블레이드에 설치된 평면 팁, 스퀼러 팁, Groove 팁들에 대하여 열전달 계수가 측정되었다. 블레이드 팁에서의 열전달 계수는 색상검출방식에 기반을 둔 천이액정법을 이용하여 측정되었으며 각각의 팁 형상에 대하여 팁 간극은 블레이드 스팬의 1.5%와 2.3% 두 조건에서 실험을 수행하였다. 캐스케이드 출구 속도와 블레이드 코드길이에 기초를 둔 Reynolds 수는 $2.48{\times}10^5$ 이다. Groove 팁 표면에서의 열전달 계수는 평면 팁보다 낮게 측정되었으며, 특히 흡입면을 따라 경사진 홈이 파인 팁에서는 스퀼러 팁보다 낮은 열전달 계수가 측정되었다.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.78-84
• /
• 2003

The changes of microstructure and hardness of TLP bonds of directionally solidified Ni base superalloy, GTD-111, with variation of homogenizing and aging treatment were investigated. The specimens were bonded at 1403K for 7.2ks using different insert metals such as MBF-50, MBF-80 and MBF-90 and they were homogenized at 1393K with various holding time. At center of bonded interlayer homogenized for hold time 30h, the contents of aluminum and titanium were approximately 90% and 95% of base metal, respectively. In this study, aging was performed at three different kinds : one step aging ; 1113K $\times$ 16h, two step aging ; 1113K $\times$ 10h ⇒ 1103K $\times$ 10h, three step aging ; 1113K $\times$ 10h ⇒ 1103K $\times$ 8h ⇒ 922K $\times$ 24h. ${\gamma}$' volume fraction and hardness of joints were high in the sequence of one step, two step and three step aging, whereas ${\gamma}$' volume fraction and hardness of joints obtained by three step aging treatment were higher than those of raw material. Tensile properties of joints bonded with MBF-80 and MBF-90, homogenized at 1393K for 30h and then three step aged became excellent than those of raw material, however, joint bonded with MBF-50 was poor.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.65-71
• /
• 2003

일반적으로 액체로켓 엔진의 추력실에서 연소중 어느 정도의 열 유속을 발생하는가를 아는 것은 추력실을 냉각하기 위한 가장 중요한 사항 중에 하나이다. 이에 본 연구에서는 Kerosen/LOx를 추진제로 사용하는 소형 액체로켓 엔진의 추력실에서 발생하는 heat flux를 측정하기 위하여 thin wall chamber를 제작하였다. wall thickness는 1mm로 하였으며 추력실 외벽에 총 9개의 열전쌍을 부착하여 연소시험을 수행함으로써 연소중 변화하는 추력실의 외벽온도를 측저하였다. System을 1차원 비정상상태로 가정하고 측정된 추력실의 외벽온도로부터 one-dimensional the transient energy equation을 이용하여 추력실에서 발생하는 열유속 및 열전달계수를 예측하였다. 혼합비 2,0의 조건에서 실험변수로서 연소압에 변화를 주었으며 실험결과 열전달계수가 연소압에 0.88승에 비례하는 관계식을 얻어낼 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.311-318
• /
• 2010

본 연구에서는 팁 형상이 가스터빈 블레이드의 팁 열전달에 미치는 영향을 알아보기 위하여 선형 캐스케이드의 블레이드에 설치된 평면 팁, 스퀼러 팁, Groove 팁들에 대하여 열전달 계수가 측정되었다. 블레이드 팁에서의 열전달 계수는 색상검출방식에 기반을 둔 천이액정법을 이용하여 측정되었으며 각각의 팁 형상에 대하여 팁 간극은 블레이드 스팬의 1.5%와 2.3%로 변경 하에 실험을 수행하였다. 캐스케이드 출구 속도와 블레이드 코드길이에 기초를 둔 Reynolds 수는 $2.48{\times}10^5$ 이다. Groove 팁 표면에서의 열전달 계수는 평면 팁보다 낮게 측정되었으며, 특히 흡입면을 따라 경사진 홈이 파인 팁에서는 스퀼러 팁보다 낮은 열전달 계수가 측정되었다.

• 공업화학
• /
• 제9권5호
• /
• pp.674-679
• /
• 1998

액체금속로 증기발생기 전열관 재질로 사용이 예상되는 ferrite steel 시편을 사용해서 소듐분위기에서 미량의 물 누출 실험을 수행하였다. 누출경로는 소듐-물 반응생성물 및 부식생성물에 의한 self-plugging 현상과 열적인 transient 및 전열관의 vibration에 의한 re-opening 메카니즘으로 설명이 가능하였다. 실험결과, 600 Psig의 injection 압력으로 5 g $H_2O$를 소듐분위기 속의 시편으로 누출시킨 경우, 누출초기와 약 70분 경과 후에 약간의 누출 흔적이 보였으나, self-plugging되었던 누출경로는 129분이 경과되자 완전 re-opening된 것으로 확인되었다. 누출시편의 re-opening shape은 2중으로 되어 있었으며, 소듐부위에서 시편 표면에 나타난 re-opening size 약 2 mm의 직경을 나타내었다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.50-58
• /
• 2016

한국형 발사체(KSLV-II) 추진제 공급시스템은 각 단에 위치한 추진제 탱크에 산화제와 케로신을 공급해주는 시스템이다. 발사체의 추진제 탱크를 안정적으로 충전하기 위해, 충전시나리오와 충전유량을 결정하였다. 다음으로 1D 유동 해석프로그램을 이용하여 추진제 공급시스템을 모델링 하였다. 1D steady state 해석을 통하여 각 시스템에서의 충전모드에 따른 밸브용량과 orifice 사이즈를 계산하였다. Steady state 결과를 이용하여 1D transient 해석을 수행하였다. 해석 결과 추진제가 각 추진제 탱크로 충전됨에 따라 탱크의 수두가 상승하여 충전유량이 감소하는 것으로 나타났다. 최종적으로 해석을 통해 제안된 충전시스템 모델이 요구되는 충전설계조건을 만족하는 것을 확인하였다.

• 한국의류학회지
• /
• 제17권2호
• /
• pp.329-338
• /
• 1993

The purpose of this study was to design an instrument to simulate the Human-Clothing-Environment system and evaluate the water vapour transport properties of sweat absorbent PET fabrics. The instrument was composed of sweat generating part, clothing part which can simulate clothing layers, and enviromental part. As specimens, sweat absorbent PET, regular PET, cotton, nylon and acrylics fabrics were included. For the water vapour transport(WVT), relative humidities and temperatures were measured by film type humidity sensors and thermocouples, respectively. Water vapour pressures were calculated with measured RH's and temperatures. For the liquid water transport, wickability and demand wettability were measured. Results showed that there was a difference in terms of water vapour transport mechanism depending on the fiber type ; sweat absorbent PET showed higher WVT at the transient period then equilibrated, whereas other fabrics showed lower WVT at the transient period then increased continuously. These differences are expected to affect to the difference in the comfort properties of clothings. Sweat absorbent PET showed higher demand wettability and wickability than other fabrics. Wide application of the instrument was also suggested.

• Toxicological Research
• /
• 제21권1호
• /
• pp.63-70
• /
• 2005

Gami-Honghwa-Tang (KH-19), a herbal prescription for reducing the side effect of radiotherapy, is composed of eight crude herbs such as Rehmanniae Radix Preparata, Angelicae Gigantis Radix, Cnidii Rhizoma, Paeoniae Radix, Corni Fructus, Moutan Cortex Radicis, Lycii Fructus, Carthami Flos, and Glycyrrhizae Radix. In this study, marker substances in KH-19 were analyzed by high performance liquid chromatography-diode array detector (HPLC-DAD) and safety evaluation of standardized KH-19 was evaluated by good laboratory practices (GLP) guideline of Korea Food and Drug Administration. HPLC-DAD was employed to determine the quantities and the qualities of several marker substances such as 5-hydroxymethyl-2-furaldehyde (5-HMF), paeonol, loganin, paeoniflorin, glycyrrhizin, and decursin in the KH-19. In acute oral toxicity study on rat, transient inhibition of body weight was shown, but change in general symptom was not detected. No dead animal was observed up to 5,000 mg/kg in both male and female animals. In acute oral toxicity study on Beagle dog, transient vomiting, diarrhea, anorexia, and body weight reduction were observed, However, no dead animal was observed up to 2,000 mg/kg in both male and female animals.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.107-113
• /
• 2007

The burning characteristics of interacting droplets with internal circulation in a convective flow are numerically investigated at various particle arrangement and size difference. In this simulation some conditions are fixed, surround gas temperature is 1250K, pressure is 10 atm and drolet's initial temperature is 300K. The transient combustion of arranged droplets, the fixed droplet distances of 4 radii to 20 radii horizontally, is studied. And the range of size of droplet is 75${\mu}m$ to 100${\mu}m$. The results obtained from the present numerical analysis reveal that the transient flame configuration and retardation of droplet internal motion with the horizontal spacing substantially influence lifetime of interacting droplets. At a Reynolds number 10, lifetime of the three droplets with decreasing horizontal droplet spacing increases monotonically. But when droplet spacing decreases further to 4radii, Lifetime of interacting droplets are increase. So Lifetime of interacting droplets exhibits a strong dependence on the horizontal droplet spacing and size difference. It can be investigated well with these conditions to that of single burning droplet.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1036-1043
• /
• 2005

Concentric annular heat pipes (CAHP) were fabricated and tested to investigate their thermal characteristics. The CAHPs were 25.4 mm in outer diameter and 200 mm in length. The inner surface of the heat pipes was covered with screen mesh wicks and they were connected by four bridge wicks to provide liquid return path. Three different heat pipes were fabricated to observe the effect of change in diameter ratios between 2.31 and 4.23 while using the same outer tube dimensions. The major concern of this study was the transient response as well as isothermal characteristics of the heat pipe outer surface, considering the application as uniform heating device. A better performance was achieved as the diameter ratio increased. For the thermal load of 180 W, the maximum temperature difference on the outer surface in the axial direction of CAHP was $2.3^{\circ}C$ while that of the copper block of the same outer dimension was $5.9^{\circ}C.$ The minimum thermal resistance of the CAHP was measured to be $0.004^{\circ}C/W.$ In regard to the transient response during start-up, the heat pipe showed almost no time lag to the heat source, while the copper block of the same outer dimensions exhibited about 25 min time lag.