• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.25-29
• /
• 2012

The novel type of cable under consideration is cooled by gaseous Helium at elevated pressure. Helium is known for having poor electric breakdown strength; therefore the dielectric capabilities of this type of cable must be tested under conditions similar to the envisaged operation. In order to study the dielectric performance we have designed and built a novel high pressure cryostat rated at 2.17 MPa which has been used for testing model cables of lengths of up to 1 m. The cryostat is an open system where the gas is not re-circulated. This allows maintaining a high purity of the gas. The target temperature range is between 40 K and 70 K. This substantially increases the critical current density of the HTS compared to 77 K, which is the typical temperature of cables cooled by liquid nitrogen. The cryostat presented allows for adjusting the temperature and keeping it constant for the time necessary to run a complete dielectric characterization test. We give a detailed description of the cryostat. Measurements of partial discharge inception voltages as well as the temperature distribution along the model cables as a function of time are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.42-42
• /
• 2008

Considerable attention has been focused on the applications of flexible liquid crystal (LC)-based displays because of their many potential advantages, such as portability, durability, light weight, thin packaging, flexibility, and low power consumption. To develop flexible LCDs that are capable of delivering high-quality moving images, like conventional glass-substrate LCDs, the LC device structure must have a stable alignment layer of LC molecules, concurrently support uniform cell gaps, and tightly bind two flexible substrates under external tension. However, stable LC molecular alignment has not been achieved because of the layerless LC alignment, and consequently high-quality images cannot be guaranteed. To solve these critical problems, we have proposed a PDMS pixel-wall based bonding method via the IB irradiation was developed for fasten the two substrates together strongly and maintain uniform cell gaps. The effect of the IB irradiation on PDMS with PI surface was also evaluated by side structure configuration and a result of x-ray photoelectron spectroscopic analysis of PDMS interlayer as a function of binder with substrates. large number of PDMS pixel-walls are tightly fastened to the surface of each flexible substrate and could maintain a constant cell gap between the LC molecules without using any other epoxy or polymer. To enhance the electro-optical performance of the LC device, we applied an alignment method that creates pretilt angle on the PI surface via ion beam irradiation. Using this approach, our flexible LCDs have a contrast ratio of 132:1 and a response time of about 15 ms, resulting in highly reliable electro-optical performance in the bent state, comparable to that of glass-substrate LCDs.

• 대한화학회지
• /
• 제22권5호
• /
• pp.340-355
• /
• 1978

化學反應 수반하는 氣體吸着反應器의 設計에 가장 重要한 氣液界面間의 物質傳達係數와 面積을 測定하는데 자주 모델反應이 利用된다. 本硏究는 그 中에서 wetted wall column 에 sulfite-system을 dldydgkdu 特別히 氣液間의 接觸時間이 氣體吸着速道에 미치는 영향을 硏究 檢討하였다. 反應速道가 매우 빠르거나 늦으면 column의 길이에 따라서, 다시 말하면 接觸時間에 따라서 氣體吸着速道에 差異가 크다는 것을 發見했다. 反應速道恒數 $k_2=5.5{\times}10^6m^3/kmol{\cdot}s$ 近處에서는 이 差異가 없어진다. 換言하면 이런 條件下에서 裝置의 hydrodynamics가 氣體吸着速道에 無關해진다. 金屬 column 代身에 graphite column을 使用할 수 있다는 例證을 題示하였다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.355-359
• /
• 2005

분별침전 공정에서 순도 및 수율에 미치는 온도의 영향을 확인하였다. 분별침전을 위해 일정 온도에서 보관할 경우와 단계적으로 보관 온도를 하강하는 경우에 대한 분별침전 효율을 확인하였다. 일정온도$(0^{\circ}C)$에서 보관할 경우 높은 수율$({\sim}84%)$을 얻을 수 있는 반면 단계적으로 보관 온도를 하강할 경우 상대적으로 높은 순도$({\sim}79%)$를 얻을 수 있었다. 또한 단계적으로, 큰 폭으로 보관 온도를 하강 시킬 경우 더 높은 순도를 얻을 수 있었다. 저장온도$(-20^{\circ}C{\sim}12^{\circ}C)$를 일정하게 유지할 경우 paclitaxel 순도 면에서 $0^{\circ}C$가 가장 효과적이었으며 온도변화에 따른 수율은 거의 영향이 없었다. 따라서 최종 정제를 위한 전 처리 공정으로 분별침전 공정이 간단하고 매우 효과적임을 알 수 있었다.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2005

An experimental study was carried out to obtain the fundamental data about the effects of radical ignition on premixture combustion. A CVC(constant volume combustor) divided into the sub-chamber and the main chamber was used. Numerous narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in tile sub-chamber derives the simultaneous multi-point ignition in the main chamber. We have examined the effects of the sub-chamber volume, the diameter and number of passage holes, and the equivalence $ratio({\Phi})$ on the combustion characteristics by means of burning pressure measurement and flame visualization. In a CVC, the overall burning time including the ignition delay became very short and the maximum burning pressure was slightly increased by the radical ignition(RI) method in comparison with those by the conventional spark ignition(SI) method. Combustible lean limit by RI method is extended by ${\Phi}=0.25$ compared with that by SI method. Also, In cases of charging the number and the diameter for the fixed total cross section of the passage holes, combustion period increased significantly at a sub-chamber with a single hole, but those of the other conditions had almost a similar tendency in the sub-chamber with 4 or more holes. regardless of equivalence ratio. Therefore, it was Proved that a critical cross section exists with the number of passage holes.

• 농업과학연구
• /
• 제38권2호
• /
• pp.295-299
• /
• 2011

The content of hesperidin in the mixed tea, which was composed of dried orange peel, laurel leaf, mulberry leaf, silver magnolia leaf, oriental melon tap, cassia seed, and licorice root, was determined by high performance liquid chromatography (HPLC). Hesperidin was quantified by a reverse phase column with gradient solvent system (watcr:acetonitrile = 80:20 to 35:65 for 30 min) and UV/VIS detection (280 nm). The How rate was kept constant at 1.0 ml/min. The content of hesperidin in the mixed tea was measured in depending on extraction time 1, 2, 3, and 4 min (29.07, 52.39, 52.45, and 88.35 mg/g, respectively).

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.5-10
• /
• 2005

정지궤도 인공위성의 추진시스템은 각 탱크 및 배관, 주요 핵심부분 등에 온도를 측정할 수 있는 온도센서를 장착하고 있다. 또한 추진시스템 내에 다수의 탱크가 장착될 경우 온도변화에 따라 탱크 내 추진제가 이동하는 열펌핑 현상이 발생하고 이때 온도변화는 일정한 경향을 갖는다. 본 논문에서는 무궁화위성 1호 추진시스템의 온도변화를 분석하고 이를 통하여 배관내에 가압제의 유입시기를 추정하고 위성폐기 시점을 추정하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.643-647
• /
• 2014

Two types of fuel supply method ar used in CNG vehicles. One is premixed ignition and the other is gas-jet ignition. In premixed ignition, the fuel is introduced with intake air so that homogeneous air-fuel mixture may form. The ignitability of this method depends on the global equivalence ratio. In gas-jet ignition, CNG is introduced directly into the engine combustion chamber. The overall mixture is stratified by retarded fuel injection. In this study, a visualization technique was employed to obtain fundamental properties regarding overall mixture formation of direct injected CNG fuel inside a constant volume chamber. Jet angles, penetrations and projected jet area with respect to ambient pressure are investigated. The penetration decreases apparently and the time reaching the CVC wall was delayed as the chamber pressure increases. This is caused by the higher inertia of the fluid elements that the injected fluid must accelerate and push aside. It is same to liquid fuel such as diesel and gasoline, but this phenomenon is far more prominent for the gaseous fuel.

• Food Quality and Culture
• /
• 제1권1호
• /
• pp.6-12
• /
• 2007

In this study, we examined the effects of egg yolk powder added to flour dough on the lipid oxidation of fried products during storage. The flour dough containing the egg yolk powder (0, 5, and 10%) was fried in sunflower oil at $180^{\circ}C$ for 90 sec. The fried products were then stored at $60^{\circ}C$ for 9 days in the dark. The lipid oxidation of the fried products was evaluated by fatty acid composition, peroxide values (POV), conjugated dienoic acid (CDA) contents, and thiobarbituric acid (TBA) values. The color and phospholipids (PL) contents of the fried products were also determined by colorimetry and high performance liquid chromatography, respectively. The addition of egg yolk powder to the dough decreased the POV, CDA contents, and TBA values of the fried products during storage. Although POV, CDA contents, and TBA values significantly increased in the products without egg yolk powder during storage, little change was observed in the products with egg yolk powder. The PL contents remained relatively constant in the flied products added with egg yolk powder during storage. The lightness and greenness of the fried products decreased, and the yellowness increased, as the storage time increased. The results clearly indicate that the addition of egg yolk powder to the dough improved the lipid oxidative stability of the fried products during storage in the dark, and the PL in the egg yolk might have contributed to the improvements in lipid oxidative stability.

• 환경위생공학
• /
• 제15권1호
• /
• pp.39-45
• /
• 2000

The purpose of this study was conducted to indentified the fixing quality of $CO_2$, the most important greenhouse effect gas, by microalgae Chlorella ellipsoidea in batch test apparatus. The glass flask of $1.4{\ell}$ culture media which was saturated with 99.99% pure $CO_2$ gas was setted water bath of $25^{\circ}C$, 5000Lux, and seeded 100$m\ell$ algae liquid. We checked the change of inorganic carbon concentration and algae population with time in culture media. The result were next: the growth of algae population relied on aquatic IC(inorganic carbon) concentration. And the pH was increased with decrease of IC concentration. The growth of algae population had positive correalation with $CO_2$ concentration, and the coefficient of correlation was 0.982. The specific growth rate($\mu$) of Chlorella ellipsoidea was 1.104/d, the maximum specific growth $rate({\mu}_{max}$) of 9.21/d, and helf velocity constant($K_s$) of $259mg/{\ell}$ by Monod equation.