• 공업화학
• /
• 제31권3호
• /
• pp.291-298
• /
• 2020

본 연구에서는 RF/DC 마그네트론 증착법을 이용하여 실온에서 유리 기판 상에 ZITO/Ag/ZITO 다층막 투명전극을 제조하였다. ZITO/Ag/ZITO (100/8/42 nm)로 이루어진 다층막 구조에 대해, 면저항이 9.4 Ω/㎡이고 550 nm에서 투과도가 83.2%인 투명 전도성 필름이 얻어졌다. ZITO/Ag/ZITO 다층막 필름의 면저항 및 투과도 특성은 적외선(열선)을 효과적으로 차단할 수 있기 때문에 고분자분산액정(polymer-dispersed liquid crystal, PDLC) 기반 스마트 윈도우 적용에 매우 유용함을 알 수 있었으며 이로 인해 에너지 절약형 스마트 유리로서의 응용도 가능할 것으로 판단된다. 제조된 ZITO/Ag/ZITO 다층막 투명전극을 적용한 2관능성 우레탄 아크릴레이트 기반 PDLC 시스템에 있어서 PDLC 층 두께 및 자외선(ultraviolet, UV) 세기 변화가 전기광학적 특성, 광중합 동력학 및 표면 형태학에 미치는 영향을 조사하였다. 15 ㎛의 PDLC 층 두께를 가지며 2.0 mW/c㎡의 UV 세기로 광경화된 PDLC 셀이 우수한 off-state 불투명도, 높은 on-state 투과도 및 양호한 구동 전압을 나타냈다. 또한, 본 연구에서 제조된 최적 조건의 PDLC 기반 스마트 윈도우는 광을 효율적으로 산란시킬 수 있는 2~5 ㎛ 크기의 양호한 마이크로 구조를 갖는 액정 droplet들이 형성되었으며, 이로 인해 우수한 최종 물성을 갖는 PDLC 셀이 제조되었다.

• 공업화학
• /
• 제33권1호
• /
• pp.50-57
• /
• 2022

본 연구에서는 RF/DC 마그네트론 증착법을 이용하여 유리 기판 상에 실온에서 TIZO/Ag/TIZO 다층막 투명전극 필름을 증착하였다. 전체 박막 두께 60 nm TIZO/Ag/TIZO (10 nm/10 nm/40 nm)로 이루어진 다층막의 경우 650 nm에서 투과도는 86.5%, 면저항 값은 8.1 Ω/□를 나타냈으며, 적외선(열선)을 효과적으로 차단할 수 있는 투과도 특성 때문에 향후 에너지 절약형 스마트 윈도우로서의 적용도 가능할 것으로 판단된다. TIZO/Ag/TIZO 다층막 투명전극을 적용한 폴리에스터 아크릴레이트 기반 고분자분산액정(polymer-dispersed liquid crystal, PDLC) 시스템에 있어서 액정과 prepolymer의 함량비, PDLC 코팅층의 두께 및 자외선 세기 변화에 따른 전기광학 특성 및 표면 형태학에 미치는 영향이 조사되었다. 15 ㎛의 PDLC 층 두께에 1.5 mW/cm²의 UV 세기로 광경화된 TIZO/Ag/TIZO 다층막 투명전극 적용 PDLC 셀이 전반적으로 양호한 구동 전압과 on-state 투과도 및 뛰어난 off haze를 나타냈으며, PDLC 복합체의 고분자 매트릭스 표면에 형성된 액정 droplet들은 입사광을 효율적으로 산란시킬 수 있는 1~3 ㎛ 크기를 갖고 있었다. 또한, 본 연구에서 제조된 TIZO/Ag/TIZO 다층막 투명전극 적용 PDLC 기반 스마트 윈도우는 연한 갈색의 색조를 띠고 있어서 심미적 측면에서 색다른 장점을 부여할 것으로 기대된다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권5호
• /
• pp.289-294
• /
• 2002

Cellulose production by Acetobacter pasteurianus was investigated in static culture using four bioreactors with silicone rubber membrane submerged in the medium. The shape of the membrane was flat sheet, flat sack, tube and cylindrical balloon. Production rate of cellulose as well as its yield on consumed glucose by the bacteria grown on the flat type membranes was approximately ten-fold greater than those on the non-flat ones in spite of the same membrane thickness. The membrane reactor using flat sacks of silicone rubber membrane as support of bacterial pellicle can supply greater ratio of surface to volume than a conventional liquid surface culture and is promising for industrial production of bacterial cellulose in large scale.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2004년도 춘계학술발표논문집
• /
• pp.127-139
• /
• 2004

The process of papermaking involves water removal on the paper machine wire, in the press section and in the dryer section. In the dryer section, liquid water in the wet web is removed mainly by evaporation. In conventional machine this is achieved by passing the web over a number of steam heated dryer rolls. A drying process of paper on a heated cylinder roll calculated based on a 1-dimensional model which concerns unsteady heat and mass transfer in the direction of paper thickness. In this study, Prediction of moisture contents average paper sheet temperature and volume fraction along a series of cylinder. Independently, developed models is compared using the same reference data. The model is implemented in CFD code, FLUENT, using user-define-function(UDFs).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1415-1417
• /
• 2009

High transmittance and low resistance index matched transparent conducting oxide (IMTCO) coated glass was prepared and characterized. IMTCO was deposited by RF magnetron sputtering with the thickness of 15nm and 90nm thick anti-reflection layer was evaporated. To modify surface to hydrophilic, in-situ plasma treatment was also performed. IMTCO coated glass exhibited 96.6% of transmittance in the wavelength range of 400~700nm which is relatively high value compared to commercially available IMTCO glass. The sheet resistance uniformity was measured to be 1.53%.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.8-13
• /
• 2000

X-ray diffraction technique was used to quantify change of cellulose crystallinity during refining. XRD data confirmed that fiber wall delamination was caused by the structural conversion of celluloses which occurred in a liquid medium during refining. The quantified crystallinity of celluloses in pulp fibers was closely associated with the change of fiber wall delamination, which was defined by measurement of fiber wall thickness. In particular, it was well recognized that low intensity beating showed a better response in the change of crystallinity than high intensity one. The decrease o cellulose crystallinity during refining considerably enhanced the improvement of interfiber bonding ability of a dried sheet.

• 폴리머
• /
• 제35권6호
• /
• pp.574-579
• /
• 2011

자동차 선도장 강판을 위한 핵심 응용기술로서 3-롤코팅 공정을 연구하였다. 본 연구를 위한 3-롤코팅은 저장조로부터 코팅액을 끌어 올리는 pick-up롤, 적절한 코팅 두께로 계량시키기 위한 계량롤, 강판에 직접 코팅시키기 위한 applicator 롤로 구성되어 있다. 전단담화의 유변물성을 갖는 고분자 도료의 코팅 유동 특성과 코팅 운전 영역을 pickup 롤과 계량롤 사이의 속도비와 간격 등의 공정조건과의 상관관계를 통해 고찰하였다. 안정한 코팅 영역에서, 간격이 크거나 속도비가 작을수록 코팅 두께는 증가하였다. 또한, ribbing과 cascade라는 불안정성은 각각 속도비가 낮고 높을 때 관찰되었다. 특히, 속도비가 낮을때, ribbing의 파장과 심각도가 증가함을 확인하였다.

• 열처리공학회지
• /
• 제34권3호
• /
• pp.122-129
• /
• 2021

This study focuses on the microstructural development of 99% magnesium alloy sheet manufactured using twin roll casting (TRC) process. Herein, a plate with a thickness of 5 mm was manufactured using the TRC process, homogenization heat treatment was performed at 400℃ for 2-32 h, and finally, the change in microstructure was evaluated via optical microscopy and textural analysis. The results suggest that the plate manufactured using the TRC process was not destroyed and was successfully rolled into a plate. Microscopic observation suggested that the dendritic cast structure was arranged along the rolling direction. And the central layer of the rolled plate, where was present in a liquid state at the beginning of rolling, solidified later during the TRC process to form central segregation. The initial cast structure and inhomogeneous structure of the plate were recrystallized by homogenization heat treatment for only 2 h, and it was confirmed that the segregated part of the central layer became homogeneous and recrystallization occurred. Grain growth occurred as the heat treatment time increased, and secondary recrystallization occurred, wherein only some grains were grown. The textural analysis, which was conducted via X-ray diffraction, confirmed that the relatively weak basal plane texture developed using the TRC process was formed into a random texture after heat treatment.

• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.44-54
• /
• 2002

A brief review of current status in the field of agricultural spray and future research challenges are presented. Researches on the pesticides sprays, pollen sprays, postharvest sprays, and biological control agent sprays among the various applications of agricultural spray were selected and reviewed. In the agrochemical sprays, the techniques to increase the deposition such as electrospray and reduce the drift such as introductions of drift retardants and of mechanical means are reviewed. The introduction of mechanical means includes low drift, air-assisted, air inclusion, shield or shroud assisted and pulse flow nozzles. For flat fan nozzles, the data of breakup length and thickness of liquid sheet are essential to understand the atomization processes and develop the transport model to target In the air-assisted spray technology to reduce drift, further works on the effect of application height on drift and air assistance on droplet size should be followed. In addition, methods for quantifying the included air in the air inclusion techniques are required. The atomization characteristics of biopesticides spray are not being elucidated and the formulations of biopesticides should be taken into account the spray characteristics of existing nozzle and sprayer. A few researches on the droplet size of fallout can be found in the literature. A combined technology with electrostatic method into one of method for the reduction of drift may be an effective strategy for increasing deposition and reducing drift. Only an integrated approach involving all stakeholders such as engineers, chemists, and biologists, etc. can result in improved application of agricultural spray.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.121.2-121.2
• /
• 2011

Aluminum-doped Zinc Oxide (AZO) is considered as an excellent candidate to replace Indium Tin Oxide (ITO), which is widely used as transparent conductive oxide (TCO) for electronic devices such as liquid crystal displays (LCDs), organic light emitting diodes (OLEDs) and organic solar cells (OSCs). In the present study, AZO thin film was applied to the transparent electrode of a channel-shaped flexible organic solar cell using a low-temperature selective-area atomic layer deposition (ALD) process. AZO thin films were deposited on Poly-Ethylene-Naphthalate (PEN) substrates with Di-Ethyl-Zinc (DEZ) and Tri-Methyl-Aluminum (TMA) as precursors and $H_2O$ as an oxidant for the atomic layer deposition at the deposition temperature of $130^{\circ}C$. The pulse time of TMA, DEZ and $H_2O$, and purge time were 0.1 second and 20 second, respectively. The electrical and optical properties of the AZO films were characterized as a function of film thickness. The 300 nm-thick AZO film grown on a PEN substrate exhibited sheet resistance of $87{\Omega}$/square and optical transmittance of 84.3% at a wavelength between 400 and 800 nm.