• 설비공학논문집
• /
• 제11권4호
• /
• pp.464-471
• /
• 1999

This paper describes a design of the helium-recondensing system utilizing cascade Roebuck refrigerators. Superconducting generator or motor has the superconducting field winding in its rotor that should be continuously cooled by cryogen. Since liquid helium transfer from the stationary system to the rotor is problematic, cumbersome, and inefficient, the novel concept of a rotating helium-recondensing system is contrived. The vaporized cold helium inside the rotor is isothermally compressed by centrifugal force and expanded sequentially in cascade refrigerators until the helium is recondensed at 4.2K. There is no helium coupling between the rotor and the stationary liquid helium storage. Thermodynamic analysis of the cascade refrigeration system is performed to determine the key design parameters. The loss mechanisms are also explained to identify entropy generation that degrades the performance of the system.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.10-17
• /
• 2003

액체 로켓의 추진제탱크 가압을 위해 사용되는 극저온 액체헬륨의 정상상태 및 천이상태 열유동 해석을 수치적으로 수행하였다 벽면에서의 단열 및 비단열 조건에 대한 정상 해석을 통하여 설계유량 및 설계유속을 만족시키는 헬륨 배관의 내경 및 압력손실, 온도변화 등을 조사하였으며 특히 단열조건에서도 헬륨의 온도는 주울-톰슨계수의 영향에 의해 증가하는 경향이 있음을 밝혀내었다. 그리고 국부적인 열유입 있을 경우에의 관내 헬륨의 온도 및 압력의 시간적 변화를 천이해석을 통하여 고찰하였으며 열유입부의 밀도 감소에 의한 열유입부 후단부의 속도 증가량을 예측하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.354-359
• /
• 2001

As the temperature of liquid under negative pressure approaches the absolute zero, the nucleation process due to thermal fluctuations hardly occurs. Instead of this mechanism, quantum fluctuations may lead the formation of nucleus for new phase in metastable state. In this study, the thermal as well as quantum nucleation bubble in liquid helium under negative pressure was investigated theoretically. The energy barrier against nucleation was estimated by molecular interaction due to the Londom dispersion force. It is shown that the phase transition from liquid to vapor in is possible due to the quantum tunneling below 0.2 K for Helium-4 and 0.1 K for Helium-3, at negative pressures close to the ideal tensile strength at which every liquid molecules become bubbles simultaneously.

• 항공우주기술
• /
• 제5권2호
• /
• pp.134-142
• /
• 2006

헬륨분사를 통한 극저온 추진제의 과냉각 방식은 발사체의 이륙 전에 액체산소의 bulk boiling을 억제하고 과냉각 상태를 유지하기 위한 효과적인 방법들 중의 하나이다. 본 자료에서는 이러한 헬륨 분사 냉각 시스템에 대한 이론적 고찰을 통해 열전달과 질량전달 조건을 이해하고, 해석 모델을 제시하였다. 해석 모델의 주요 특징은 유한 열전달과 무한질량전달 개념을 이용하여 분사 시스템을 표현한 것이다. 또한, 실험과 해석결과의 비교를 통하여 해석 모델을 검증하였으며, 헬륨 분사량의 변화, 탱크 압력의 변화 등 조건 변화에 따른 결과를 살펴보았다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권2호
• /
• pp.108-118
• /
• 2000

This paper describes a design of the helium-recondensing system utilizing cascade Roebuck refrigerators. Superconducting generator or motor has the superconducting field wind-ing in its rotor that should be continuously cooled by cryogen. Since liquid helium transfer from the stationary system to the rotor is problematic, cumbersome, and inefficient, the novel concept of a rotating helium-recondensing system is contrived. The vaporized cold helium inside the rotor is isothermally compressed by centrifugal force and expanded sequentially in cascade refrigerators until the helium is recondensed at 4.2 K. There is no helium coupling between the rotor and the stationary liquid helium storage. Thermodynamic analysis of the cascade refrigeration system is performed to determine the key design parameters. The loss mechanisms are explained to identify entropy generation that degrades the performance of the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.89-91
• /
• 1996

In dry-winding(unfilled) superconducting magnets, the behavior of liquid helium occupying the extremely small void space within the winding is contributed as a primary factor for transient stability of magnets. Therefore, numerical experiments have been carried out concerning the influences of transient heat transfer of liquid helium ocupying the void space in the winding and thermal properties of insulation at the conductor surface on the transient stability of magnets, by using three-dimensional finite element method(FEM). In this paper, we are going to consider three different cases for heat transfer characteristics of liquid helium to observe the influences of the rest of liquid helium in void space within the winding on the transient stability.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권1호
• /
• pp.1-6
• /
• 2021

Thermoacoustic oscillations (TAOs) could be often observed in liquid helium cryogenic system especially in half-open tubes. These tubes have closed warm end (300K) and open cold end (usually 4.4K). This phenomenon significantly induces additional heat load to cryogenic system and other undesirable effects. This work focuses on using computational fluid dynamics (CFD) method to study TAOs in liquid helium. The calculated physical model, numerical scheme and algorithm, and wall boundary conditions were introduced. The simulation results of onset process of thermoacoustic oscillations were presented and analyzed. In addition, other important characteristics including phase relation and frequency were studied. Moreover, comparisons between experiments and the CFD simulations were made, which demonstrated thevalidity of CFD simulation. CFD simulation can give us a better understanding of onset mechanism of TAOs and nonlinear characteristics in liquid helium cryogenic system.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.551-554
• /
• 2006

Inhibition of propellant temperature rising in liquid propulsion rocket using cryogenic fluid as a propellant is very important. Especially propellant temperature rising during stand-by after filling and pre-pressurization can bring into cavitation in turbo-pump. One of the method preventing propellant temperature rising in cryogenic feeding system is recirculating propellant through the loop composed of propellant tank, feed pipe, and recirculation pipe. The circulation of propellant is promoted through gas-lift effect by gas injection to lower position of recirculation pipe. In this experiment liquid oxygen and gas helium is used as propellant and injection gas. Under atmospheric and pressurized tank ullage condition, helium injection flow-rate is varied to observe the variation of recirculating flow-rate and propellant temperature in the feed pipe. There is appropriate helium injection flow-rate for gas-lift recirculation system.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1108-1115
• /
• 2015

본 연구에서는 마우스피스 방법을 이용하여 산소의 질량유량 측정과 헬륨의 체적유량 측정에 대한 관계식을 정리하였다. 마우스피스 방법은 상사된 실험식을 이용함으로써 시험비용을 절감할 수 있다. 마우스피스 방법에서는 기체헬륨을 측정하여 용이하게 액체산소의 누설량을 측정할 수 있다. 시제품의 누설량 측정에서 상온과 극저온 상태의 헬륨과 산소간의 누설량 관계를 이해하기 위해 실험을 수행하여 비교하였다. 헬륨의 누설 체적유량[$A.m{\ell}/s$]은 액체상태의 산소 누설의 질량유량[g/s]에 대비하여 174배였다. 실험식과 비교된 계산식은 미국 국립기술표준원의 자료를 이용하여 증명하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.72-82
• /
• 2007

This paper relates to reducing the temperature of a cryogenic liquid by contacting it with gas bubbles, which can be characterized by diffusion-driven evaporative cooling, The characteristic of diffusion-driven evaporative cooling is thoroughly examined by theoretical. analytical and experimental methods specifically for the case of helium injection into liquid oxygen. The results reveal that if the gaseous oxygen partial pressure in helium bubbles is lower than the liquid oxygen vapor pressure, cooling occurs autonomously due to diffusion mass transfer. The method of lowering the injected helium temperature turns out to be very effective for cooling purpose.