• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.1-12
• /
• 2016

이 연구는 슈크로오스디스테아레이트(Sucro-DS)를 사용하여 친수형 O/W 에멀젼을 만들고, 이 에멀젼의 드로플렛(droplet)은 다중층의 구조를 가지는 액정생성에 관한 것이다. Sucro-DS의 물리화학적 특성을 알아보았고, 이를 이용한 유화성능에 대하여 연구하였다. 액정을 형성하기 위하여 3wt%의 Sucro-DS, 5wt%의 글리세린, 5wt%의 수쿠알란, 5wt%의 카프릭/카프릴릭트리글리세라이드, 3wt%의 세토스테아릴알코올, 1wt%의 글리세릴모노스테아레이트, 78wt%의 정제수의 혼합계에서 안정한 다중층의 라멜라구조가 형성됨을 알 수 있었다. 이를 응용하여 불안정한 활성물질을 봉입한 크림을 만드는 방법에 대하여 기술하였다. 또한, 이 기술을 이용한 크림의 보습효과에 대하여 연구하였다. 인체 임상시험을 통한 피부개선효과에 대하여 연구한 결과를 보고한다. Sucro-DS 를 사용하여 안정한 액정상을 생성하는 pH 범위는 5.2~7.5 에서 안정한 액정구조를 유지하고 있었다. 액정의 안정성이 우수한 농도는 3wt%의 베헤닐알코올을 함유할 경우의 경도는 13kg/mm,min 이었다. 동일 함량의 점도는 25,000mPas/min 이었다. 유화제의 영향에 대하여 실험한 결과, Sucro-DS 의 농도는 5wt%가 적합하였고, 안정한 액정의 입경분포는 4~6mm 이었다. 이를 현미경분석을 통하여 관찰하였고, 3 개월동안 액정변화의 안정성은 $4^{\circ}C$, $25^{\circ}C$, $45^{\circ}C$에서 안정함을 알 수 있었다. 임상시험으로, 바르기 전의 보습력은 $13.4{\pm}7%$ 이었다. 액정이 형성되지 않은 크림의 보습력은 $14.5{\pm}5%$로 바르기 전보다는 약 8.2% 보습력이 상승하였다. 반면, 액정크림의 경우 $19.2{\pm}7%$로, 도포 전보다는 43.3%보습력이 상승하였다. 응용분야로 Sucro-DS 유화제를 사용한 액정크림, 로션, 아이크림 등 다양한 제형개발이 가능하고, 화장품산업은 물론 의약품산업 및 제약산업에서 피부외용제의 유화기술로 폭넓게 응용이 가능할 것으로 기대한다.

• 폴리머
• /
• 제24권6호
• /
• pp.810-819
• /
• 2000

Poly(p-hydroxybenzoate) (PHB)/poly(ethylene terephthalate) (PET) 8/2 공중합 폴리에스터 액정고분자와 poly(ethylene 2,6-naphthalate) (PEN), PET를 용융방사하여 인장탄성률을 측정하고, 55$^{\circ}C$ ο-chlorophenol 에서 2시간 동안 모재인 PEN/PET부분을 용출시킨 후, 용출되지 않은 PHB 피브릴을 전자현미경으로 조사하였다. 모재고분자 속에 존재하는 피브릴이 단섬유일 때 적용하는 Halpin-Tsai식과 피브릴이 연속상일 경우 적용하는 혼합의 법칙을 사용하여 이론적인 탄성률을 계산하고, 측정된 탄성률과 비교하였다. 이론적 탄성률과 측정된 탄성률의 차이를 보정하기 위하여 무차원 점도비 상수 (K)를 정의하고, K를 적용하여 기존의 식을 변형하였다. 변형된 Halpin-Tsai식과 혼합의 법칙을 통해 계산된 이론적인 탄성률은 용융방사를 통해 제조된 복합재료의 탄성률 계산에 더 적합함을 확인하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.19-23
• /
• 2019

A large grain YBCO bulk superconductor is fabricated by the top-seeded melt growth (TSMG) method. In the TSMG process, the seed crystal is placed on the top surface of a partially melted compact and therefore the seed crystal is frequently tilted during the melt process due to intrinsic unstable nature of Y211 particle +liquid phase mixture. In this work, we report the successful growth of single-domain YBCO bulk superconductors by a bottom-seeded melt growth (BSMG) method. Investigations on the trapped magnetic field and the microstructures of the synthesized specimens show that a bottom-seeded melt growth method has hardly affected on the crystal growth behavior, the microstructure development and the magnetic properties of the large grain YBCO bulk superconductors. The bottom-seeded melt growth method is clearly beneficial for the stable control of seed orientation through the melt process for the fabrication of a large grain YBCO bulk superconductor.

• Korean Chemical Engineering Research
• /
• 제51권5호
• /
• pp.587-590
• /
• 2013

N-vinyl-2-pyrrolidone (NVP)에 포함된 불순물인 2-pyrrolidone을 제거하기 위해 용융결정화가 이용될 수 있으며, 그 기본 연구로써 두 물질의 고-액 상평형을 측정하였다. 시차주사 열량계(DSC)와 결정화기를 이용하여 얻어진 두 실험결과는 비슷한 경향을 보였으며, NVP와 2-pyrrolidone으로 구성된 2성분계 혼합물이 공융계를 형성함을 보였다. 간단한 열역학 식을 이용하여 혼합물의 상평형과 공융점(eutectic point)을 계산하였으며 실험결과와 비교적 잘 일치하였다. 결정화 공정의 설계에 중요한 요소인 결정성장속도를 알기 위해 판형 결정화기를 이용하여 시간에 따른 NVP 결정의 두께를 측정하였다. 냉각온도가 낮을수록 NVP의 결정성장속도가 증가하였다. 실험데이터로부터 상관된 열전달계수는 결정의 성장 거동을 잘 설명하였다.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.121-126
• /
• 2006

HVOF thermal spray coating of Co-alloy T800 is progressively replacing the classical hard coatings such as chrome plating because of the very toxic $Cr^{6+}$ ion known as carcinogen causing lung cancer. For the study of the possibility of replacing of chrome plating, the wear properties of HVOF Co-alloy T800 coatings are investigated using the reciprocating sliding tester both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$. The possibility as durability improvement coating is studied for the application to the high speed spindles vulnerable to frictional heat and wear. Wear mechanisms at the reciprocating sliding wear test are studied for the application to the systems similar to the sliding test such as high speed spindles. Wear debris and frictional coefficients of T800 coatings both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$ are drastically reduced compared to those of non-coated surface of parent substrate Inconel 718. This study shows that the coating is recommendable for the durability improvement coatings on the surfaces vulnerable to frictional heat. The sliding surfaces are weared by the mixed mechanisms such as oxidative wear, abrasion by the sliding ball slurry erosion by the mixture of solid particles and small drops of the melts and semi-melts of the attrited particles cavitation by the relative motions among the coating, sliding ball, the melts and semi-melts. and corrosive wear. The oxide particles and the melts and semi-melts play roles as solid and liquid lubricant reducing the wear and friction coefficient.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.1-33
• /
• 2000

Silicon carbide ceramics with sintering additives from the system AlN-Y$_2$O$_3$ can be gas-pressure sintered to theoretical density. While commonly a combination of sesquioxides is used such as Al$_2$O$_3$-Y$_2$O$_3$, the oxynitrid additives offer the advantage that only a nitrogen atmosphere is require instead of a powder. By starting form a mixture of ${\beta}$-SiC and ${\alpha}$-SiC, and by performing dedicated heat treatments after densification, anisotropic grain growth is obtained which leads to a platelet microstructure showing enhance fracture toughness. In the present work, recent improvement of the mechanical behaviour of these materials at ambient and high temperatures is reported. By means of a surface oxidation treatment in air it is possible to obtain four-point bending strengths in excess of 1 GPa, and the strength retention at high temperatures is significantly improved.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.55-59
• /
• 2013

A Light Emitting Diode(LED) is a semiconductor device which converts electricity into light. LEDs are widely used in a field of illumination, LCD(Liquid Crystal Display) backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. In general, LEDs production does die bonding and wire bonding on board, and do silicon and phosphor dispensing to protect LED chip and improve brightness. Then lens molding process is performed using mixed liquid silicon rubber(LSR) by resin and hardener. A mixture of resin and hardener affect the optical characteristics of the LED lens. In this paper, computational design of static mixer was performed for mixing of liquid silicon. To evaluate characteristic of mixing efficiency, finite element model of static mixer was generated, and fluidic analysis was performed according to length of mixing element. Finally, optimal condition of length of mixing element was applied to static mixer from result of fluidic analysis.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.6-16
• /
• 1998

Ceramides are currently emerging as the major skin care ingredients due to !heir barrier properties in the stratum corneum of the human skin. Thus, major cosmetic companies have developed synthetic ceramide analogs for their own use. In this study, several ceramide mimic compounds , new skin barrier lipids, were designed and synthesized, and their physical and biological properties were investigated to evaluate their skin care capability. Several structures were designed from the variation of hydrophobic alkyl chain and hydrophilic moiety by the use of molecular modeling software. The selected targets were synthesized, and their properties and activities were studied as the pure form, in the emulsion, or in the lamellar mixture containing cholesterol and fatty acid. Some compounds, such as 1,3-bis(N-(2-hydroxyethyl)-palmitoylamino)-2-hydroxypropane, enhanced the restoration of skin barrier damaged by SDS(sodium dodecyl sulfate), and by acetone treatment. The rate of restoration was comparable to that of natural ceramides. The synthesized compounds alleviated SDS induced skin irritation and facilitated lamellar phase liquid crystal formation. The treatment of 1,3-Dis(N-(2-hydroxyethyl)-palmitoylam ino)-2-hyd roxypropane on the acetone damaged skin revealed that the compound promoted the recovery of intercellular lipid lamellar structure of stratum corneum layer. The replacement of palmitoyl groups of the compound with shorter alkyl chain gave lower emulsion viscosity and liquid crystal density, suggesting easier formulation and poorer barrier activity. Most of the synthesized compounds were non-irritable in various toxicological tests proving that they can be safely introduced to the skin care formulations.

• 공업화학
• /
• 제30권4호
• /
• pp.415-420
• /
• 2019

비이온 계면활성제와 유화안정제가 O/W 유화 제형에 미치는 영향을 살펴보기 위하여 비이온 계면활성제와 유화안정제 종류를 달리한 여러 제형을 만들어 이들의 유변학적 특성을 비교하였다. 친수성 비이온 계면활성제는 polysorbate 60 (Tween 60), PEG-60 hydrogenated castor oil (HCO 60), octyldodeceth-16 (OD 16), ceteareth-6 olivate (Olivem 800) 등을 사용하였고, 유화안정제로는 cetyl alcohol, glyceryl monostearate, stearic acid 등을 각각 사용하였다. Octyldodeceth-16을 사용한 유화 제형에서만 상분리가 일어나고 나머지 제형은 모두 안정한 상을 유지하였다. 계면활성제 ceteareth-6 olivate와 유화안정제 cetyl alcohol을 혼합 사용한 제형의 점도, 경도, 크림성 등이 가장 높게 나타나고 유화된 입자 사이즈도 가장 큰 값으로 측정되었다. 이와 같은 결과는 유화 제형에 액정이 많이 생성되면서 네트워크 구조의 텍스처가 형성되었기 때문이다. 이 제형에서는 탄성적 특성이 크게 나타나고 힘이 가해지는 이력에 따라 점도 값이 달라지는 씩소트로픽 현상이 나타났다.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.16-22
• /
• 2007

Recently, mesoporous metallic materials are becoming more and more important in various applications like catalysts, electrochemical detectors, batteries, and fuel cells because of their high surface area. Among the various methods for manufacturing mesoporous structure, surfactant templating method followed by electroplating has been tried in this study. A mesoporous metallic film was prepared by electrodeposition from electroplating solution mixed with surfactant template. Nonionic type lyotropic liquid crystalline surfactant, Brij56, and nickel acetate based solution were selected as a template material and electroplating solution, respectively. To determine the content of surfactant forming a hexagonal column structure, the phase diagram of electroplating solution and surfactant mixture has been exploited by polarized optical microscopy equipped with heating and cooling stage. Nickel films were electroplated on Cu foil by stepwise potential input method to alleviate the concentration polarization occurred during the electroplating process. TEM and XRD analyses were performed to characterize the size and shape of mesostructures in manufactured nickel films, and electrochemical characterization was also carried out using cyclic voltammetry.