• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.205-215
• /
• 2006

In this paper an optical power meter using Hadamard transform, which can be used in multiple channel optical elements alignment system, is proposed. A traditional optical power meter in multiple channel optical elements alignment system is able to judge how well the elements are aligned each other by measuring optical power of the first and the last two channels with at least two detectors. It has critical drawback that the alignment accuracy per channel is dependent on the number of detectors. The proposed optical power meter can get noise reduction by the Hadamard transform based multiplexing technique. The Hadamard transform based multiplexing technique using spatial light modulators is distinguished by the best enhancement of signal-to-noise ratio (SNR) for the reconstructed signals. Moreover, the noise reduction increases with increasing the order of multiplexing, namely the number of optical element channels. The proposed system is implemented by PDLC (Polymer Dispersed Liquid Crystal) mask which is operated by electric filed and generates optimal multiplexing patterns based on the Hadamard transform and single detector. It means that we obtain not only the each channel's optical power of multiple channel elements at once but also the best enhancement of SNR with single detector. Experimental results show that the proposed optical power meter is suitable for an active optical alignment system for multiple channel optical elements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.431-431
• /
• 2007

In this paper, the LC alignment characteristics of the NDLC thin film deposited by PECVD and sputtering were reported respectively. The NDLC thin film deposited using sputter showed uniform LC alignment at the 1200 eV of the ion beam intensity and pretilt angle was about $2^{\circ}$ while the NDLC thin film deposited using the PECVD showed uniform LC alignment and high pretilt angle at the 1800 eV of the ion beam intensity. Concerning the ion beam intensity, uniform LC alignment of the NDLC thin film deposited by the sputtering was achieved at the lower intensity. And the pretilt angle of the NDLC thin film deposited by sputter was higher than those of NDLC thin film that was deposited using the PECVD. The uppermost of the thermal stability of NDLC thin film was $200^{\circ}C$, respectively. However, NDLC thin film deposited by the PECVD showed stability at high temperature without defects, compared to NDLC thin film deposited by the sputter.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.178-181
• /
• 2001

The electro-optical (EO) characteristics for the twisted-nematic (TN)-liquid crystal display (LCD) photo-aligned with polarized UV exposure on various blending photopolymer surfaces were investigated. Excellent LC alignment and voltage-transmittance (V-T) characteristics for TN-LCD photo-aligned with polarized UV exposure of normal incidence on the blending Photopolymer (polyimide (PI) + PM4Ch (poly(4-methacryloyloxy chalcone))) surface containing chalcone group can be achieved. The EO performances of the TN-LCD photo-aligned on the blending photopolymer can be improved due to the photosensitivity by long side chain of the photopolymer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.895-898
• /
• 2004

We propose configurations for a transflective in-plane switching (IPS) cell using muti-domain structures. Usually, the cell configurations for a transflective liquid crystal(LC) cell have a complicated structure, because retardation change of transmissive part and reflective part are not same. The transflective LC cell should have two configurations for each part, such as a multi-cell gap structure. With the ion-beam alignment and the horizontal switching LC cell, a simple structure for a transflective LC cell is proposed. The configuration only adopts one cell gap structure, which may help the enhancement of a yield. Their original optical properties in conventional transmissive and reflective type IPS liquid crystal dispaly(LCD) are kept, it shows the wide-viewing angle and the good wavelength dispersion characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.924-928
• /
• 2005

We synthesized the two types of photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the two types of photopolymer surface can be obtained. The Voltage-transmittance (V-T) curve in the photoaligned TN cell with UV exposure was different from two type. The response time of photoaligned TN cell was measured about 21 ms in two alkyl chain and about 15 ms in four alkyl chain.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.1-5
• /
• 2005

The recent Bistable Nematic ($BiNem^{(R)}$) LCD technology presents long term bistability, high level passive matrix multiplexing, gray levels capabilities and high optical quality. The $BiNem^{(R)}$ device, based on anchoring breaking, needs specific low anchoring strength materials - alignment layers and liquid crystal mixtures. We present here our approach to develop nematic mixtures with wide enough temperature range and low zenithal anchoring energy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1080-1082
• /
• 2008

An ultra-thin reflective flexible LCD film has been demonstrated. The 30% thickness of the display can be reduced by applying a quarter-wave-plate film as upper substrate. A low temperature alignment material and special designed photo spacer were applied in this new display. The bending behavior was improved by reduced thickness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.858-861
• /
• 2006

In this paper we model the liquid crystal director field in the Patterned Vertical Alignment (PVA) LC using the fast Q-tensor method, which can model multidimensional director configurations with defects in the liquid crystal director field. We observed the dynamic behaviors of the defect experimentally by applying the voltage and modeled the LC director field with defect in the active area of the PVA cell. As a result, we could also calculate the optical transmittance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1235-1238
• /
• 2006

One-Drop-Filling (ODF) process is an advanced vacuum filling process in LCoS manufacture line. The merits not only increase the throughput of liquid crystal filling process but also reduce the number of equipments. Studying application of ODF process in LCoS panel manufacturing is the purpose of is this article. The accuracy of liquid crystal drop size, the stability of seal dispensing and the nozzle size etc. In the tiny panel manufacture are more important than those factors in normal panel manufacture.

• Journal of Information Display
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2005

We propose new fabrication methods of a pixel-isolated liquid crystal (LC) structure for flexible display applications. In the LC structure fabricated through the proposed method, the patterned interpixel walls for sustaining the cell thickness are supported by the solidified polymer layer through anisotropic phase separation of LC/polymer composite, causing the alignment of the LC molecules to have very good mechanical stability against external pressure. In addition, we show that such pixel-isolating walls can be made by the stamping method which can be applied to fabricate large size plastic LCDs by roll-to-roll processing.