• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.948-951
• /
• 2007

In order to improve the performance of LCD, chiral dopant is added to liquid crystal mixture. When we decide the rubbing direction, we must consider the rotation direction of liquid crystal molecules by chiral dopant. When the rotation direction of liquid crystal molecules caused by dielectric torque decided by rubbing direction and that decided by chiral dopant are coincided, the performance of LCD would be improved along to our initial cell design intentions.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.426-431
• /
• 2004

We have studied the pressure-dependent liquid crystal's dynamics in a twisted nematic (TN) liquid crystal panel with thin film transistor by applying an external pressure to it. When the external pressure is applied to the panel in a dark state, the disclination lines were generated as a light leakage whereas they did not appear in a simple test cell that has only pixel and common electrodes. It was because the disclination lines were Provoked by the electric field between pixel electrode and data/gate bus line for active matrix driving. Consequently, the external pressure resulted in dynamic instability of the liquid crystal so that the disclination lines at the data/gate bus line intruded into the active area.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.301-304
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by atomic beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}\;to\;45^{\circ}$ of incident angle. Consequently, the vertical alignment effect of liquid crystal electro-optical characteristic by the atomic beam alignment method on the SiC thin film layer can be achieved.

• Journal of Information Display
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Recent progress in both low pretilt and high pretilt defect free C1 surface stabilized ferroelectric liquid crystal (SSFLC) devices is reviewed. First, by numerical calculation to investigate the balance between surface azimuthal anchoring energy and bulk elastic energy within the confined chevron layer geometry of C1 and C2, it is possible to achieve a zigzag free C1 state by low azimuthal anchoring alignment with a low pretilt angle. The critical azimuthal anchoring coefficient for defect free C1 state is calculated. Its relationship with elastic constant, chevron angle as well as surface topography effect are also discussed. Second, using $5^{\circ}$ oblique SiO deposition alignment method a defect free, large memory angle, high contrast ratio and bistable C1 SSFLC display, which has potential for electronic paper applications has also been developed. The electrooptical properties and bistability of this device have been investigated. Various aspects of defect control are also discussed.

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1793-1798
• /
• 2005

액정 디스플레이 소자의 디렉터 내에서 결점을 모델링 할 수 있는 fast Q-텐서법을 이용하여 불균일한 표면에서 발생할 수 있는 결점의 발생과 움직임에 대한 모델링을 하였다. 결점을 모델링하기 위하여 $1{\mu}m$ 단차의 전극을 가진 수직배향셀을 이용하였다. 모델링을 통하여 단차에서 발생하는 액정 디렉터 내에서의 결점의 발생과 결점선을 확인할 수 있었으며 이러한 결과는 실험을 통하여 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.15-19
• /
• 1997

The characteristics of the response time and the viewing angle on twisted nematic (TN) liquid crystal display (LCD) and amorphous (a)-TN-LCD without rubbing were investigated. To measure the tansmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. It was found that the response time on A-TN-LCD was fast compared to the TN-I-CD, and the weak anchoring strength was attributed to the fast response time on a-TN-LCD. Also, we obtained the wide viewing angle characteristics on a-TN-LCD. The liquid crystal alignment of LCD device for electro-optical characteristics is discussed in the present paper.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.32-38
• /
• 2001

The most important parameter for TV application of LCD is a fast switching time for the display of moving image. To achieve faster switching time, the novel LC single materials with large dielectric anisotropies ($16{\sim}20$), high clearing temperatures ($195.5{\sim}237.4^{\circ}C$), broad nematic ranges (up to 169.9 $^{\circ}C$) and high birefringence ($0.254{\sim}0.2200$) were developed. KUR-series LC mixtures blended these single materials having significantly higher clearing temperatures and dielectric anisotropy values compared with conventional LC mixture. Especially, their clearing temperatures are $10{\sim}30^{\circ}C$ higher than their host mixture. These LC mixtures showing about lOms of high-speed switching time in Tv/Monitor of TFT LCD, is short enough to be addressed in a single time frame of 60Hz (16.7 ms). The threshold voltage $V_{th}$ was low enough to operate at a driving voltage of 5 V. The VHR values were found to be high enough for TFT-LCD in wide temperature range. Our novel LC mixtures are suitable materials for the inclusion in to LC mixtures for TV application of TN-LCD

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.68-71
• /
• 2003

To be able to show moving images without visual problems like blurring and tailing, the response time of liquid crystal display (LCDs) must be improved. In this paper we will discuss our progress in improving the response time by optimizing the cell configuration and the use of new liquid crystal mixtures. A 20.1inch diagonal UXGA IPS TFT-LCD has been developed having a response time as fast as l-frame time (16msec) for white-black operation and less than 16msec in all gray levels without applying ODC (Over Driving Circuit). This is very important because one of the technology to reduce motion blurring, the use of scanning backlight is conditioned by 16msec for all grays. The excellent gray-to-gray response can be explained by virtue of fundamental characteristics of S-IPS mode and makes a good contrast with the results of VA mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1933-1935
• /
• 2002

In this paper, we present a study of the structure and electro-optic behavior of hybrid liquid-crystal-silica sphere composite photonic crystals, formed by filling the (26% by volume) void space of fee (face centered cubic) silica opals infiltrated with a nematic liquid crystal. Three dimensional photonic crystals of visible range were fabricated via a self assembly method of silica spheres of submicron diameter. The expected fee structure was confirmed by scanning electron microscopy (SEM) of the dehydrated crystal with glass removed. The photonic crystal exhibited significant electric-field-induced shift of the optical Bragg reflection peak when the liquid crystal has the long molecular axis oriented parallel to the sphere surfaces.

• 한국광학회지
• /
• 제18권2호
• /
• pp.100-104
• /
• 2007

본 연구에서는 클래딩 영역에 주기적인 공기층이 있는 광자 결정 광섬유에 액정을 주입하고, 온도를 변화시켜 주면서 빛의 투과 스펙트럼의 변화를 측정하였다. 액정을 주입한 광섬유는 특정 온도에서 특정 파장에 대해 여러 가지 투과특성을 얻어 낼 수 있었다. 광섬유에 가해주는 온도에 따라서 투과하는 광 신호를 약 $10\sim15dB$ 정도 최소화 할 수 있었는데, 이를 이용하면 특정 파장 대역에서 광 신호를 소광시킬 수 있는 광 스위칭 소자에 응용 가능할 것이다.