• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.940-941
• /
• 2009

The adsorption strength of liquid crystal molecules on the polymer surface was compared measuring temperature dependence of retardation above Nematic-Isotoropic transition temperature ($T_{NI}$). The relationship between surface order parameter and adsorption strength on the polymer surface was discussed.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.285-290
• /
• 1993

A series of samples were prepared by treating natural zeolite from Kampo area with HCl and NaOH. And, the adsorption characteristics of some liquid samples were investigated by the Diamond-Kinter method. The adsorption amount of all liquid investigated was more effective in acid treatment than in alkali treatment. In the case of n-, iso-C3H7OH, thed adsorption amount of n-form which has smaller molecular size was larger. Similar tenedncy was observed in n-, iso-C4H9OH, but the amount was lower than n-, iso-C3H7OH. In CHCl3 and CCl4, that of CHCl, which is smaller molecular size and has polarity, was far lager. From the view of the molecular size, adsorption amount of C6H5CH3 and p-C6H4(CH3)2 showed the characteristics of surface activity rather than chemical treatment.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.127-131
• /
• 2017

Isosteric heat of hydrogen adsorption is one of the most important parameters required to describe solid-state hydrogen storage systems. Typically, it is calculated from adsorption isotherms measured at 77K (liquid N2) and 87K (liquid Ar). This simple calculation, however, results in a high degree of uncertainty due to the small temperature range. Therefore, the original Sievert type setup is upgraded using a heating and cooling device to regulate the wide sample temperature. This upgraded setup allows a wide temperature range for isotherms (77K ~ 117K) providing a minimized uncertainty (error) of measurement for adsorption enthalpy calculation and yielding reliable results. To this end, we measure the isosteric heats of hydrogen adsorption of two prototypical samples: activated carbon and metal-organic frameworks (e.g. MIL-53), and compared the small temperature range (77~87K) to the wide one (77K ~ 117K).

• 대한화학회지
• /
• 제17권2호
• /
• pp.80-84
• /
• 1973

고체-액체 경계 면에서의 흡착은 흡착 층을 단일 분자층으로 생각하고 흡착체에 평행한 방향에 대해서는 이차원 액체로 수직한 방향에 대해서는 조화 단진동을 하는 것으로 보고 여기에 천이상태이론을 적용하여 흡착 층에서의 용액의 상태 합을 구성하고, 시클로헥산-벤젠 이성분 용액의 실리카-겔에 대한 흡착에 적용하여, 흡착량과 흡착 층에서의 몰 엔트로피 및 흡착열의 값을 계산하여 얻었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.847-848
• /
• 2004

We studied a low density 8CB liquid crystal-hydrophobic aerosil dispersions imbedded in submicron-size cylindrical pores. The nanosize spherical aerosil particles are adsorbed at the pore wall and hinder the planar anchoring. The adsorption is temperature dependent, and an axial to radial molecular configuration transition occurs within the cylindrical pores.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.812-818
• /
• 2024

The volume and toxicity of radioactive waste can be decreased by separating the components of high-level liquid waste according to their properties. An impregnated silica-based adsorbent was prepared in this study by combining N,N,N',N',N",N"-hexa-n-octylnitrilotriacetamide (HONTA) extractant, N',N'-di-n-hexyl-thiodiglycolamide (Crea) extractant, and macroporous silica polymer composite particles (SiO₂-P). The performance of platinum-group metals adsorption and separation on prepared (HONTA + Crea)/SiO₂-P adsorbent was then assessed together with that of co-existing metal ions by batch-adsorption and chromatographic separation studies. From the batch-adsorption experiment results, (HONTA + Crea)/SiO₂-P adsorbent showed high adsorption performance of Pd(II) owing to an affinity between Pd(II) and Crea extractant based on the Hard and Soft Acids and Bases theory. Additionally, significant adsorption performance was observed toward Zr(IV) and Mo(VI). Compared with studies using the Crea extractant, the high adsorption performance of Zr(IV) and Mo(VI) is attributed to the HONTA extractant. As revealed from the chromatographic experiment results, most of Pd(II) was recovered from the feed solution using 0.2 M thiourea in 0.1 M HNO₃. Additionally, the possibility of recovery of Zr(IV), Mo(VI), and Re(VII) was observed using the (HONTA + Crea)/SiO₂-P adsorbent.

• 자원환경지질
• /
• 제33권6호
• /
• pp.519-524
• /
• 2000

This study has been performed to evaluate the possibility of utilizing stone powder sludges from stone quarry and manufacturing plant as adsorbents for heavy metals in industrial wastewater. The stone powder sludges from stone quarry (IS-01) have the most effective adsorption capacity (above 95％ of initial concentrations) under the given experimental conditions of reaction times (Pb : 15 min, Cu : 2 hr, Zn : 48 hr), initial acidity of solution (pH>3) and dosage (sludge/liquid ratio : 0.02). The stone powder sludges from manufacturing plant (CW-01) show relatively high adsorption capacity (about 95％ of initial concentrations) only for Pb with a reaction times of 12 hours, initial acidity of solution (pH>3) and dosage (sludge/liquid ratio : 0.02). The stone powder sludges (IS-01) from stone quarry having relatively excellent adsorption capacity under the given experimental conditions show their potential utilization as heavy metal adsorbents.

• 공업화학
• /
• 제9권5호
• /
• pp.661-666
• /
• 1998

고시리카제올라이트 (HSZ), 거대망상수지입자(MR) 및 입상활성탄(GAC)에 의한 수용액중의 12가지 아민유도체의 평형흡착 실험 데이터와 Freundlich, Langmuir, Toth, Redlich-Peterson 식의 인자들을 각각 구하였다. 아민류의 흡착특징에 있어서는 고시리카제올라이트는 unfavourable, 입상활성탄은 favourable로 비선형이나, 거대망상수지흡착제는 선형관계의 특성을 나타내며, 변수가 2개인 Freundlich 식과 3개인 Redlich-Peterson 흡착등온식에 잘 일치하였다. HSZ, MR, GAC에 의한 아민류의 흡착능은 방향족>1급아민>2급아민 순이었으며, Freundlich상수 k와 n의 곱인 (k n)값은 HSZ와 MR 및 GAC에서 아민류의 끓는 점 $T_B$, 몰부피 $V_m$, 그리고 해리상수 $pK_a$에 비례하여 증가하였다.

• 한국자기공명학회논문지
• /
• 제12권1호
• /
• pp.60-64
• /
• 2008

Cross-polarization (CP) signals were observed even from liquid samples such as neat toluene. Therefore, CP signals of liquid molecules in the presence of high surface materials do not necessarily mean the molecules are adsorbed on solid surface, especially when no signal from the tertiary observing nuclei such as carbons of the molecules is detected.

• 공업화학
• /
• 제19권4호
• /
• pp.439-444
• /
• 2008

폐각 원료를 수증기 활성화 공정을 거쳐 다공성 흡착제로 제조하여 흡착성능을 평가하였다. 세척 파쇄한 폐각원료를 $600{\sim}1000^{\circ}C$로 탄화시킨 후 $700{\sim}800^{\circ}C$의 회전로에 주입하는 수증기 활성화법에 의해 활성화공정을 수행하였다. 다양한 조건으로 제조된 폐각흡착제 중 $1000^{\circ}C$로 탄화시켜 제조된 흡착제가 다른 공정으로 제조된 흡착제에 비해 흡착능이 높게 나타났다. 또한 기상흡착과 액상흡착실험을 통해 흡착제로서의 활용가능성을 확인한 결과 기상흡착의 경우에는 기존 흡착제에 비해 현저히 떨어진 성능을 나타내었으며, 액상흡착의 경우에는 흡착질로 benzene을 선정한 경우 다른 상용 흡착제와 비교하여 거의 유사한 흡착특성을 나타내어 흡착제로서의 활용가능성을 확인할 수 있었다.