• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.165-172
• /
• 2001

Wheel bearing units were almost exclusively used for car front wheel, where the two ball rows are directly side by side with integrated rubber seal. The seal is of important for wheel bearing units due to the adverse environmental conditions with mud and splash water. The seal of wheel bearing units was designed to have geometry with multi lips, which elastic lip contacts and deforms with bearing. The equation of reaction force for deformed lip as cantilever beam was previously used for seal lip design. But it's result was not useful because deflection of the beam differs from lip's. In this study, deformed shape of the lip was assumed to and order function which is more similar to lip deformation and made the equation for reaction force prediction. The Reaction forces from each other equations were compared with results by FEA to prove usefulness of new equation.

• 대한소아치과학회지
• /
• 제42권3호
• /
• pp.233-241
• /
• 2015

본 연구는 학령 전 어린이의 정상적인 교합력과 구순 폐쇄력을 알아보기 위한 목적으로 수행되었다. 3-6세의 어린이 98명을 대상으로 하였고, 60명의 성인을 대조군으로 교합력과 구순 폐쇄력을 측정하였다. 좌우측 평균 교합력은 남아에서 217.69 N, 여아에서 205.05 N이었고, 평균 구순 폐쇄력은 남아에서 4.81 N, 여아에서 4.07 N이었다. 어린이는 연령이 증가함에 따라 교합력, 구순 폐쇄력 모두 증가하는 경향을 보였고, 성별에 따른 유의한 차이는 없었다. 성인에서는 교합력과 구순 폐쇄력 모두 남성이 여성보다 유의하게 큰 값을 보였다. 교합력과 구순 폐쇄력은 연령, 신장, 체중 모두에 대해 통계학적으로 유의한 양의 상관관계를 보였다. 그리고 어린이의 교합력과 구순 폐쇄력은 유의한 양의 상관관계를 나타내었다. 이상의 연구 결과 얻어진 정상적인 교합력 및 구순 폐쇄력은, 비정상적으로 낮은 값을 보이는 어린이를 감별하여 훈련을 통해 정상적인 성장을 유도하는데 사용될 수 있을 것이다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.158-162
• /
• 1996

A split shaft device is commonly used to measure the radial force of lip seals. The radial force measured with this device includes some inevitable error. This error is caused by the fact that the split shafts cannot maintain a perfect circle when the interference becomes larger or smaller than some initial interference. In this study, a theoretical model for the calculation of the radial contact force has been carried out, and an explicit equation for the measurement error as a function of the initial interference and the interference to be measured has been obtained. The error when the interference is small is not dependent upon the material properties and the shape of the lip seal, but rather upon the amplitude of the initial interference and the interference to be measured. When the interference is larger or smaller than the initial interference, the measured contact force is always underestimated or overestimated.

• Tribology and Lubricants
• /
• 제9권1호
• /
• pp.32-37
• /
• 1993

The equations are derived for the evaluation of the axial contact forces. The contact forces of rubber seals are analyzed as a function of the ratio of real contact length, the thickness of seal lip, the inclined angle of seal lip, and the interference between the edge of seal lip and the rotating inner ring. The experimental apparatus is developed for the test of seal lip contact force. The data for designing rubber seals are presented in terms of the ratio of real contact length, initial inclined lip angle, lip thickness. and the interference. The results obtained from the derived equation for the contact force are in good agreement with the experimental results.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1559-1566
• /
• 1994

Using the finite element method, the contact force, contact band width and temperature distribution of lip seals analyzed for the interference including some nonlinearities such as material nonlinearity, geometrical nonlinearity and nonlinear contact boundary condition. The calculated results showed that the contact stress concentrated on the contact zone between the garter spring and the rubber toward the flex side, the contact edge of lip seals. The high contact forces due to the increased interference separate the sealing gap between the lip edge and the rotating shaft. This may lead to leak the sealed oil.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1576-1580
• /
• 2007

Typical lip seals are widely used as sealing mechanism of rotary and reciprocating shaft. Double lip seal has comparatively high stiffness and dynamic radial eccentricity. Usually material of these seals is made of elastomer and nonlinear finite element analysis is required to analyze behaviour of this material because Young's modulus is varied with working load. In this paper, MSC MARC/MENTAT is used for nonlinear analysis of double lip seal with pressure variation and interference. The contact normal force of double lip seal between lip and shaft is analyzed to reduce power loss when shaft rotates.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.82-88
• /
• 1994

This paper deals with a FEM computation as well as measurement of the contact force and distribution of the temperature in rubber lip seals when the sealing interference between the rotating shaft and the lip edge is present. The study of the contact forces and distributions of the temperature and the sealing contact stress has always been one of the basic steps in the process of designing a lip seal. The calculated FEM results indicate that as the sealing interference increases, the contact force moderately increases compared with decreased sealing interference at the seal lip edge and radically increases the contacting width. And the FEM computation of oontact forces including nonlinear problems has been compared with experimental measurements with good agreement. The frictional heat does not dissipate promptly in the rubber seal lip and tends to accumulate at the contacting lip edge especially.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2261-2267
• /
• 1992

본 연구에서는 시일 립의 간섭량과 접촉력에 관련된 이론적 연구를 수행한다. 시일의 접촉면에서 축방향 접촉력이 크게 설계되면 시일 립 선단에서는 마찰과 마멸이 심하게 진행되어 시일수명을 크게 단출시킬 우려가 있고, 접촉력이 작으면 밀봉된 유 체의 누설유려가 증가되면서 볼과 레이스사이의 윤활상태를 나쁘게 하여 베어링 수명 을 크게 단축하는 결과를 초래하게 되므로 시일 립의 접촉력에 관련된 연구는 대단히 중요하다.

• 대한치과의사협회지
• /
• 제47권10호
• /
• pp.656-668
• /
• 2009

It is difficult to perform orthodontic treatment for cleft lip and palate patient. Although there are many orthodontic appliances to expand narrowed maxillary arch, results are rarely successful and the possibility of relapse is increased due to severe scars. Self-ligating bracket, recently used in orthodontic treatment, suggests solution of crowding by expansion of dental arches. Light and continuous force could apply for orthodontic movement due to characteristic low friction of self ligating bracket, which gives expansion force until dentition reaches its new equilibrium position and it can be expressed as spontaneous lateral expansion with heavy labial tension. This kind of expansion force is thought to be a possibility of expanding the constricted maxillary arch of cleft lip and palate patient. Repositioning of the maxilla by Le Fort I osteotomy in case of severe maxillary deficiency, increases the possibility of relapse because of limitation in anterior movement and adaptation of soft tissue. In these cases, distraction osteogenesis(DO) can be applied for stable result. We report a case of cleft lip and palate patient with narrowed maxillary arch and maxillary deficiency using self ligating bracket and DO.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7166-7175
• /
• 2015

본 논문은 대형 텔레비전 스탠드의 높이 조절에 있어 마찰력 감소를 위한 가스 스프링 사용에 대한 연구이다. 대상은 가스 스프링을 사용하는 50인치 이상의 대형 텔레비전의 높이 조절 동작에 적용되었다. 높이 조절 동작에 마찰력 감소를 얻기 위해서는 피스톤 로드에 작용하는 가스 씰 조임 기술을 개발해야 한다. 가스 씰 조임 기술이 작용하기 위해서는 가스 씰 조임 부의 내경, 커팅 각도 설계 및 소재 변경을 통해서 마찰력 향상을 얻을 수 있다.