• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.465-470
• /
• 2024

Kitchen cabinets are widely used for their spacious storage and efficient use of space, but their high installed location makes it difficult for the elderly and disabled to access. Therefore, in this paper, we propose a new height-adjustable kitchen cabinet that can be used more easily and safely. The lift-down range of cabinet was set considering the installation location of cabinet for efficient use of kitchen space and the maximum height accessible to the elderly and disabled, and the link geometry and driving method of the complex link mechanism were determined through the mechanism design procedure to ensure that the selected floor come down safely along the optimal descend path. In addition, the appropriate motor and control algorithm were added to allow the user to descend to the desired height with a simple button operation. It was confirmed through actual production that the proposed linkage mechanism performs the desired lift-down motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1338-1341
• /
• 2004

In this paper, we have proposed a new approach of routing and wavelength assignment algorithms, called Possible Available Wavelength (PAW) algorithm. The weight of a link is used as the main factor for routing decision in PAW algorithm. The weight of a link is defined as a function of hop count and available wavelengths. This function includes a determination factor of the number of wavelengths that are being used currently and are supposed to be available after a certain time. The session requests from users will be routed on the links that has the greatest number of link weight by using Dijkstra's shortest path algorithm. This means that the selected lightpath will has the least hop count and the greatest number of possible available wavelengths. The impact of proposed link weight computing function on the blocking probability and link utilization is investigated by means of computer simulation and comparing with the traditional mechanism. The results show that the proposed PAW algorithm can achieve the better performance in terms of the blocking probability and link utilization.

• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.163-171
• /
• 2016

A modular manipulator in serial-chain structure usually consists of a series of modularized revolute joint and link modules. The geometric shapes of these modules affect the number of possible configurations of modular manipulator after assembly. Therefore, it is important to design the geometry of the joint and link modules that allow various configurations of the manipulators with minimal set of modules. In this paper, a new 1-DoF(degree of freedom) joint module and simple link modules are designed based on a methodology of joint configurations using a series of Rotational(type-R) and Twist(type-T) joints. Two of the joint modules can be directly connected so that two types of 2-DoFs joints could be assembled without a link module between them. The proposed geometries of joint and link modules expand the possible configurations of assembled modular manipulators compared to existing ones. Modular manipulator system of this research can be a cornerstone of user-centered markets with various solution but low-cost, compared to conventional manipulators of fixed-configurations determined by the provider.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.415-422
• /
• 2001

A seedling pick-up device for vegetable transplanters was developed and its work performance was evaluated at the laboratory. The pick-up device extracts seedlings from a 200-cell tray of seedlings and transfers them to the place where they are to be transplanted into the soil. The device consists of a path generator, pick-up pins and a pin driver. The path generator is a five-bar mechanism comprised of a fixed link, a driving link, a driven link, a connecting link and a slider. The slider is constrained to move along the driven link and a fixed slot of combined straight-line and circular paths. The connecting link joins the driving link and the slider. When the slider moves along the straight-line path of the slot it takes seedlings out from the cell and transfers them to the transplanting hopper when moving along the circular path. A proto-type of the pick-up device was built and tested under the various operational conditions such as age of seedling, approach direction and penetration depth of pins to the cell, holding method of seedling and extracting velocity. The device extracted 30 seedlings per minute with the maximum success ratio of 97% using the seedlings of 23 days old. Some design details were also discussed and suggested to enhance the performance of the device.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.733-740
• /
• 2001

A monitoring robot capable of doing network and RF communication is introduced. The robot has several features that poses arbitrary position thanks to a mechanism combining the 4wheel drive and 4 link mechanism, transmits an image and command data via RF wireless communication. Moreover, the image data from the camera are transferred through a network communication. The robot plays a role in monitoring what is happening around the robot, and covers wide range due to a moving camera associated with the 4 arms. The robot can adjust its mass center by the 4 link mechanism, hence it guarantees a stability in moving on the slope.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.175-185
• /
• 2007

In IEEE 802.15.4 (Low-Rate Wireless Personal Area Network) specification, a successful reception and validation of a data or MAC command frame can be confirmed with an acknowledgment. However, the specification does not support security for acknowledgment frame; the lack of a MAC covering acknowledgments allows an adversary to forge an acknowledgment for any frame. This paper proposes an identity authentication mechanism at the link layer for acknowledgment frame in IEEE 802.15.4 network. With the proposed mechanism there is only three bits for authentication, which can greatly reduce overhead of device. The encrypted bit stream for identity authentication will be transmitted to device by coordinator within association process. Statistical method and simulation results prove that our mechanism is successful in handling MAC layer attack.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.256-262
• /
• 2009

In this paper, we propose a mechanism for increasing the handover performance of the IEEE 802.11 link layer. The mechanism reduces the number of scanning channels by referencing an AP map based on GPS. Also, by monitoring the SNRs of the mobile node and neighbor APs, it enables the handover to maintain a higher SNR than a given threshold. The experimental results establish that it has a disconnection ratio of 6.7% and an average SNR of 16.8 dB. It is 4.1% lower disconnection ratio and 26% higher SNR than the mechanism used by MadWifi.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.660-666
• /
• 2011

In this paper, we proposed a Particle Swarm Optimization(PSO) to search the optimal link lengths for legged walking robot. In order to apply the PSO algorithm for the proposed, its walking robot kinematic analysis is needed. A crab robot based on four-bar linkage mechanism and Jansen mechanism is implemented in H/W. For the performance index of PSO, the stride length of the legged walking robot is defined, based on the propose kinematic analysis. Comparative simulation results present to illustrate the viability and effectiveness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.614-620
• /
• 2006

Today the automobile has been changed from a mechanical system to an electronic control system fly the development of the electronic technology. In the automobile body, most of these electronic control devices are networked and managed fully by the CAN protocol. But, when a network system is overloaded, unexpected transmission delay for relative low priority objects occurs due to the static priority definition of the CAN protocol. To resolve this problem, this paper proposes a dynamic precedence queue mechanism that creates a queue for the low priority object and its relevant objects to be transmitted, which becomes urgent in an overloaded network system to keep the maximum allowable time delay. For the generated queue, the highest priority is assigned to transmit the queued objects within the shortest time. The mechanism is implemented in the logical link layer of CAN, which does not require any modification of the old CAN hardware. Effectiveness of the proposed mechanism is verified by the real experiments with an automobile network system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.343-354
• /
• 2020

Bi-stable mechanism is a system that has two different stable equilibrium positions within its range of motion. It has an ability to stay in two different positions without external power input and despite small disturbances. One of the most bi-stable applied mechanism is a morphing system, such as deployable structures, switch systems, and robot grippers. However, due to the complexity of mechanism and limitation of structure configuration, it is difficult to apply on a morphing system with rotating link mechanism. In this paper, an implementation method of rotational bi-stable mechanism using cylindrical permanent magnets is proposed. The magnetic field and the magnetic force were calculated from electromagnet model of the cylindrical permanent magnet. Based on the model, the force relation between two links containing the cylindrical permanent magnets was estimated. An array of cylindrical permanent magnets was selected for symmetric bi-stability, and an experiment on the link structure with the proposed bi-stable mechanism was performed to investigate the stability against a external torque.