• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.587-594
• /
• 2022

This paper analyzed radio link throughput performance by applying radio link simulation and test equipment because there is limit in train filed test in 420 km/h high speed environment. According to the radio performance analysis, the throughput performance is slightly degraded in QPSK and 16QAM modulation schemes. But throughput performance is highly degraded in 64QAM modulation scheme.

• Journal of Ship and Ocean Technology
• /
• v.10 no.3
• /
• pp.36-48
• /
• 2006

The train ferry, accommodating trains roll on and off, is often called as 'Railway on the Sea' or 'Blue High-way' since she can connect the railways or roads segregated by the sea and improve the accessibility and continuity of land transport systems. The ferry is especially appropriate to the intermodal transport routes mostly passing through the land but have relatively short sea segment. As the train ferry can considerably reduce the cost and time for cargo handling and modal shift and unnecessitates excessive initial investment on infrastructures such as large harbor cranes or vast container yards, introduction of train Ro-Ro ferries lessen the total transport cost for door-to-door transportation with full exploitation of the existing railway system. All the ports placed in Shandong, Liaoning and Jiangsu provinces of China are connected to the hinterlands via well developed railway and road systems. Therefore, realization of the Incheon-Yantai train ferry system will link Korea railways to TCR and the 4,131-kilometer-long Longhai-Lanxin Railway, along the famous Eurasian Continental Bridge. In the present paper, the Incheon-Yantai train ferry will be introduced as a good example of an efficient multimodal short sea shipping system for Northeast Asia.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.358-361
• /
• 1999

In auxiliary block of high speed train power factor correction and harmonics reduction is very important issue for efficient energy transport. The GTO-equipped PWM converter is used for traction untill resently. But the rising power capability of IGBTs resently allows to build IGBT-equipped PWM converter with a considerably increased switching frequency. This paper presents switching pattern, control method, operation mode and tuned filter to reduce dc link voltage ripple for paralleled converter.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.253-260
• /
• 2001

Rotating bogie frame will be used in the bogie for the Light Rail Train being developed. In development of the bogie, analyzed were the structural strength and fatigue characteristics of the rotating bogie frame. Defined load cases were applied for the analysis. No part of the rotating bogie frame is subjected to stress beyond the fatigue endurance limits of the material used when grinding the weldment of the lower plate link bend. It is concluded that the rotating bogie frame is considered safe in the view of the structural strength.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.162-167
• /
• 1999

In Auxiliary block of High speed train Power factor correction and Harmonics reduction is very important issue for efficient energy transport. The GTO-equipped PWM converter is used for traction untill resently. but the rising power capability of IGBTs resently allows to build IGBT-equipped PWM converter with a considerably increases switching frequency. In this paper presents switching pattern, control method, operation mode and tuned filter to reduce dc link voltage ripple for paralleled converter.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.61-66
• /
• 2016

This paper presents the implementation for a network structure of railway cars using a point to point communication. Most of network's representative specifications for a train are the FIP (Field Bus), MVB (Multifunction Vehicle Bus), CAN and WTB (Wire Train Bus) which is used by ALSOM, SIEMENS and BOMBADIER as major in this field. These networks in a physical layer use a multi-drop method, connected from $1^{st}$ car to $n^{th}$ car of a train through a cable without any extra services such as an electric part, amplifier. However waveforms which is passed through a long cable in the multi-drop are distorted by a capacitance or resistance of the cable or environments. Also since using a cable connected directly from $1^{st}$ car to $n^{th}$ car, if over two trains make double head, it isn't easy to distinguish ID for each railway cars. So by using the point to point network per each car, it is able to reduce a distortion. Also since reducing distortion, this communication speed can be been higher and transmit and receive any packets more stably. Using proposed token in a packet, this can make ID per each railway car automatically. Finally experimental results show the good performance and effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.366-368
• /
• 2001

ProfiBus provides real-time data communication among field devices in the EMU(Electrical Multiple Unit) and TCMS(Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) method, which is the layer 2 DDLM (Direct Data Link Mapper) protocol of ProfiBus.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.548-555
• /
• 1998

The influences of high speed train on the dynamic responses of steel composite railway bridges are investigated. The bridge system which has two Ⅰ-girder and several cross beams is modeled with plate and frame elements. With assumption of concrete slabs ate fully connected with steel girders, the offset between slabs and girders is modeled using rigid link. The track system is modeled using beams on elastic foundation theory. And, the TGV train is modeled in 2-dimension considering bouncing and pitching motion. And, braking action of vehicle is considered using speed dependent braking function. To investigate the behavior of bridges due to moving trains, parametric studies are performed.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.350-355
• /
• 2004

Because the wage of railway crews is based on the duty hour rather than the working hour, most researches have focused on the balance of duty hour for the crews. In this paper, the structure of duty hour and its relationship to the crew wage are analyzed and some issues are identified. The duty hour consists of several different jobs which are weighed equally in calculating the crew's wage. Also, the difference between the working hour and duty hour is inconsistent with the train routes; i.e., the difference of a long distance train is larger than that of a small or medium distance train. To solve the problems, possible ways to link the duty hour to the wage better are proposed and exemplified

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.265-268
• /
• 2006

Performed fatigue strength analysis for Hub to get the targeted service life of 20 years. ANSYS is used to analysis. The major structure of bearing which connect the hub and blades is modeled using the element of LINK10. To represent the stiffness of LINK10 element, initial strain and diameter of LINK10 element is applied. Prior to calculating the fatigue damages, the influence matrix is extracted from the unit loads. The target service life of 20 years is achieved from the Analysis results.