• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.237-245
• /
• 2007

In this paper, a modified PCF (Point Coordination Function) MAC (Medium Access Control) Protocol is proposed to support the multiple direct link communication between STAs (STAtions) in infrastructure mode IEEE 802.11 wireless LANs. By the proposed MAC protocol, the direct link communication between STAs, which are located within the communication range of each other, is allowed without the use of AP (Access Point) as a relay. Moreover, when multiple direct data communication between STAs can be simultaneously performed with a sufficiently small interference, multiple simultaneous direct link communication is allowed for the efficient use of radio bandwidth. AP polls STAs to grant the transmission opportunities using the direct link communication by transmitting the polling frames to STAs. An efficient polling method for granting the transmission opportunities to STAs is proposed to reduce the number of the polling frame transmissions and enhance the PCF MAC performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.23-31
• /
• 2005

ITS(Intelligent Transportation System) implementing information collection services and information support services for cars of moving fast needs a communication system of special aim such as RF-DSRC(Radio Frequency Dedicated Short Range Communication). Before RSE(Road Side Equipment) and OBE(On-Board Equipment) will be able to communicate RF-DSRC, OBE first have to request Link Initialization Access using ACTC(Activation Channel) in allocated ACTS(Activation Slot) by Slotted ALOHA. Even though Link Initialization Access is a important element to decide performance of communication system, optimal mathematic modeling study of Link Initialization Access which is adapted RF-DSRC characteristics is not enoush. So, in this paper, we propose mathematical modeling about Link Initialization Access of RF-DSRC. And then we computed Link Initialization Access probability defining offer load(G) which is adapted RF-DSRC characteristics for analyzing performance of modeling.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.676-682
• /
• 2011

Sybil attack can disrupt proper operations of wireless sensor network by forging its sensor node to multiple identities. To protect the sensor network from such an attack, a number of countermeasure methods based on RSSI (Received Signal Strength Indicator) and LQI (Link Quality Indicator) have been proposed. However, previous works on the Sybil attack detection do not consider the fact that Sybil nodes can change their RSSI and LQI strength for their malicious purposes. In this paper, we present a Sybil attack detection method based on a transmission power range. Our proposed method initially measures range of RSSI and LQI from sensor nodes, and then set the minimum, maximum and average RSSI and LQI strength value. After initialization, monitoring nodes request that each sensor node transmits data with different transmission power strengths. If the value measured by monitoring node is out of the range in transmission power strengths, the node is considered as a malicious node.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.108-119
• /
• 2014

In this paper, through the example of international lunar exploration mission the equipment was to investigate, and the amount of data transferred per day were identified. Data storage and the data transfer rate (8.4Mbps less) for the satisfaction of the value within the range of available S and X bands was confirmed by using the communication link budget. The result is to define the range of the sensor information can be obtained, as well as from the values of the parameters calculated for the transmission communication systems will be able to define the specifications.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.90-98
• /
• 2004

Variable-speed drives are being continually innovated. Recently, sensorless induction motor drives have been much studied due to several advantages. Most sensorless algorithms are based on the mathematical modeling of motors, and all the information is obtained from the monitored voltages and currents. Therefore, the accuracy of such variables largely affects the performance of a sensorless induction motor drive. However, the output voltage of the SVPWM-VSI which is widely used in a sensorless induction motor drive has a considerable error, especially in a low speed range. This paper proposes a variation of the dc link voltage as a high-performance strategy for overcoming the above problem. The proposed strategy leads to an improved resolution of the output voltage of the SVPWM-VSI in a sensorless induction motor drive. Simulation and experiment have been performed for the verification of the proposed strategy.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.250-253
• /
• 2024

This paper proposes a low-power waveform for a long-range air-to-air data link. In the case of an air-to-air data link, data communication is performed in the air and high Doppler shift may occur depending on the flight speed, so a waveform based on the non-coherent method is suitable. In addition, since it is mounted on an aircraft, it must have low power characteristics. This paper proposes a waveform that combines a modulation technique based on frequency modulation and pulse position modulation that can turn on/off the transmission signal. As a result of the performance analysis, it was shown that the performance was suitable for air-to-air operation while showing low power characteristics.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.117-129
• /
• 2020

In a Satellite communication system, a link budget analysis is the detailed investigation of signal gains and losses moving through a channel from a sender to receiver. It inspects the fading of passed on data signal waves due to the process of spreading or propagation, including transmitter and receiver antenna gains, feeder cables, and related losses. The extent of the proposed tool is to make an effective, efficient, and user-friendly approach to calculate link budget analysis. It is also related to the satellite communication correlation framework by building up a graphical interface link analysis tool utilizing STK^® software with the interface of C# programming. It provides better kinds of graphical display techniques, exporting and importing data files, printing link information, access data, azimuth-elevation-range (AER), and simulation is also possible at once. The components of the link budget analysis tool include transmitter gain, effective isotropic radiated power (EIRP), free space loss, propagation loss, frequency Doppler shift, flux density, link margin, elevation plot, etc. This tool can be useful for amateur users (e.g., CubeSat developers in the universities) or nanosat developers who may not know about the RF communication system of the satellite and the orbital mechanics (e.g., orbit propagators) principle used in the satellite link analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.783-785
• /
• 2013

In this paper, analyzed of UAVs operation altitude and range from the point of view of the data link. UAVs operation altitude is determined by the specification of the mission equipment and operational purposes. The link-of-sight analysis of data link equipment before deciding the unmanned aircraft operation altitude conditions should be considered. If GDT=0m installation then 32dBi antenna apply 13,724 meter is operation altitude. 44dBi antenna 6,657 meters. Operating altitude perspective, high-gain antenna is recommended of the long range communication.

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.303-310
• /
• 2018

LoRaWAN(Long Range Wide Area Network) is a standard for low-power, long-range, low-speed communication as announced in the LoRa Alliance. LoRaWAN addresses the physical layer and medium access control layer and the technology used in the physical layer is referred to as LoRa. LoRa can be used for remote monitoring and remote control in maritime conditions. However, unlike land, marine environment is not only difficult to construct an infrastructure for service provision, but also difficult to analyze LoRa performance in maritime. In this study, we construct an infrastructure using cloud platform and analyze LoRa link performance in maritime conditions.

• Journal of KIISE
• /
• v.44 no.7
• /
• pp.733-741
• /
• 2017

LPWAN(Low Power Wide Area Network) technology is M2M (Machine to Machine) networking technology for the Internet of Things. The technology is designed to support low-power, long-distance and low-speed communications that are typical of LoRaWAN(Long Range Wide Area Network). To exchange inter-object information using a LoRaWAN, the link performances for various environments must be known. however, active performance analysis research that is based on an empirical environment is nonexistent. Therefore, this paper empirically evaluates the performance of the LoRa (Long Range) link, a physical communication technology of the LoRaWAN for various variables that may affect the link quality in indoor and outdoor environments. To achieve this, a physical performance monitoring system was designed and implemented. A communication experiment environment was subsequently constructed based on the indoor and outdoor conditions. The SNR(Signal to Noise Ratio), RSSI(Received Signal Strength Indication), and the PDR(Packet Delivery Ratio) were evaluated.