• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.10 s.340
• /
• pp.9-16
• /
• 2005

The growth of the Internet over the last several years has placed a tremendous strain on the high bandwidth Hence, the amount of internet traffic has risen sharply and it has demanded to use the limited resource. MPLS (Multiprotocol Label Switching) is regarded as a core technology for migrating to the next generation Internet. It is important to reduce the number of labels and LSP(Label Switched Path)s for network resource management. In this thesis, we considered an MPLS multicast mechanism in the current Internet. The scalability problem due to lack of labels and multicast property is one of the serious problems in MPLS multicast mechanism, we proposed a Label Aggregation algorithm that the multicast packets on same link in MPLS allocates the same label for the scalability problem. In order to support the proposed algorithm we defined a new LDP(Label Distribution Protocol) multicast field and multicast packet is copied and transmitted for multicast group links of next node in LSR(label Switch Router).

• Proceedings of the KOR-KST Conference
• /
• 2007.05a
• /
• pp.469-476
• /
• 2007

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.453-456
• /
• 2003

DWDM(Dense Wavelength Division Multiplexing) 기반의 광 네트워크가 범 세계적인 차세대 광 인터넷(NGOI: Next Generation Optical Internet) 백본망의 대안으로 인식되고 있으나, 기존의 전기적인 오버헤드 비트를 이용한 전송 관리 정보의 사용이 더 이상 유효하지 않아 장애 관리에 많은 문제점을 드러내고 있다. 본 논문에서는 NGOI 백본망의 링크 관리를 위해 광 성능 모니터링 시스템 및. GMPLS(Generalized Multi-Protocol Label Switching)의 링크 관리 프로토콜(LMP: Link Management Protocol)을 활용한 관리 모델을 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.893-902
• /
• 2002

MPLS enables efficient explicit routing, and thus provides great advantages in supporting traffic engineering. Exploiting this capability, we Propose a load balancing scheme which deploys a multipath routing. It is named LBM (Load Balancing in MPLS networks), and targets at efficient network utilization as well as performance enhancement. LBM establishes multiple LSP (Label Switched Path)s between a pair of ingress-egress routers, and distributes traffic over these LSPs at the new level. Its routing decision is based on both the length and the utilization of the paths. In order to enhance the efficiency of a link usage, a link is limited to be used by shorter paths as its utilization becomes higher Longer paths are considered to be candidate alternative paths as the utilization of shorter paths becomes higher. Simulation experiments are performed in order to compare the performance of LBM to that of static shortest path only scheme as well as the other representative dynamic multipath traffic distribution approaches. The simulation results show that LBM outperforms the compared approaches, and the performance gain is more significant when the traffic distribution among the ingress-egress pairs is non-uniform.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.1-13
• /
• 1998

The Shortest Path Problem in Time-dependent Networks, where the travel time of each link depends on the time interval, is not realistic since the model and its solution violate the Non-passing Property (NPP:often referred to as FIFO) of real phenomena. Furthermore, solving the problem needs much more computational and memory complexity than the general shortest path problem. A new model for Time-dependent Networks where the flow speeds of each link depend on time interval, is suggested. The model is more realistic since its solution maintains the NPP. Solving the problem needs just a little more computational complexity, and the same memory complexity, as the general shortest path problem. A solution algorithm modified from Dijkstra's label setting algorithm is presented. We extend this model to the problem of Minimum Expected Time Path in Time-dependent Stochastic Networks where flow speeds of each link change statistically on each time interval. A solution method using the Kth-shortest Path algorithm is presented.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.426-433
• /
• 2002

This paper deals with an offline routing problem, which can be used as an explicit routing procedure in MPLS(Multiprotocol Label Switching) network, for traffic engineering. This problem is formulated as an MIP(Mixed Integer Programming) with the objective function which is to minimize the sum of the maximum link utilization for load balancing (link utilization) and the routing cost. Constraints arc composed of link capacity restriction and demand requirement that has origin-destination pair, bandwidth requirement and hop restriction. The problem is proved to be NP-hard so that the Lagrangean relaxation method is applied to propose a Lagrangean heuristic. To test the effectiveness & efficiency of the proposed algorithm, computational experiments are performed with numerical instances. The experiment results show that the proposed algorithm solves the problem within a reasonable time.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.233-241
• /
• 2004

In this paper, we propose a packet-lossless fast rerouting scheme at a link/node fault in MPLS (Multiprotocol Label Switching) network with minimized accumulated buffer delay problem at ingress node. The proposed scheme uses a predefined, alternative LSP (Label Switched Path) In order to restore user traffic. We propose two restoration approaches. In the first approach, an alternative LSP is initially allocated with more bandwidth than the protected working LSP during the failure recovery phase. After the failure recovery, the excessively allocated bandwidth of the alternative LSP is readjusted to the bandwidth of the working LSP. In the second approach, we reduce the length of protected working LSP by using segment-based restoration. The proposed approaches have merits of (ⅰ) no buffer delay problem after failure recovery at ingress node, and (ⅱ) the smaller required buffer size at the ingress node than the previous approach.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.3 s.8
• /
• pp.9-22
• /
• 2005

Route travel cost in transportation networks consists of actual route travel cost and route perception cost. Since the route perception cost is differently perceived according to each origin and each destination, route search has limitation to reflect the note perception cost due to route enumeration problem. Thus, currently employed advanced traveller information systems (ATIS) have considered only actual route travel cost for providing route information. This study proposes an optimal and a K-route searching algorithm which are able to reflect the route perception cost but encompass route enumeration problem. For this purpose, this research defines the minimum nit of route as a link by adopting the link label technique in route searching, therefore the comparison of two adjacent links which can be finally expanded the comparison of two routes. In order to reflect the characteristics of route perception in real situation, an optimal shortest cost path algorithm that both the forward search from the origin and the backward search from the destination can be simultaneously processed is proposed. The proposed algorithm is applied for finding K number of shortest routes with an entire-path-deletion-type of K shortest route algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.636-637
• /
• 2018

The electronic shelf label(ESL) system based on wireless communication can reduce waste of disposable paper, reduce labor force and update real time information. However, the environment in which a large number of ESL modules are installed is exposed to interference from radio frequency(RF) communications in the Industry-Science-Medical(ISM) band. In this paper, we propose an ESL system based on visible light communication to avoid congestion of ESL system using ISM band. In the proposed system, the goods information and ID transmitted from the administrator server are transmitted in the ESL Tag, and the ESL Tag identifies the ID and displays the product information. Experiments show that ESL system using visible light communication is possible.