• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.959-961
• /
• 1996

In this paper, we study the modeling and control of Electro-Magnetic Suspension System with 2 Degree Of Freedom. While the previous researchers considered the control of single rail EMS Systems, we consider the control of two rail EMS Systems. We first derive a simple model to represent the dynamics of EMS System with 2 D.O.F., using the Lagrange's method. The nonlinear equations of motion that we derive are shown to be linearizable by coordinate change and nonlinear static state feedback. The nonlinear static state feedback controller is constructed explicitly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.58-61
• /
• 1996

For a class of single-input single-output continuous-time nonlinear systems, a multilayer neural network-based controller that feedback-linearizes the system is presented. Control action is used to achieve tracking performance for a state-feedback linearizable but unknown nonlinear system. The multilayer neural network(NN) is used to approximate nonlinear continuous function to any desired degree of accuracy. The weight-update rule of multilayer neural network is derived to satisfy Lyapunov stability. It is shown that all the signals in the closed-loop system are uniformly bounded. Initialization of the network weights is straightforward.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.694-701
• /
• 2010

In this paper an effective direct torque control (DTC) and stator flux control is developed for a quasi six-phase induction motor (QIM) drive with sinusoidally distributed windings. Combining sliding-mode (SM) control and adaptive input-output feedback linearization, a nonlinear controller is designed in the stationary reference frame, which is capable of tracking control of the stator flux and torque independently. The motor controllers are designed in order to track a desired second order linear reference model in spite of motor resistances mismatching. The effectiveness and capability of the proposed method is shown by practical results obtained for a QIM supplied from a voltage source inverter (VSI).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2292-2295
• /
• 2001

In this paper, The control problem for a series DC motor is considered to adaptive fuzzy sliding-mode control scheme. Based on a nonlinear mathematical model of a series connected DC motor, instead of the combination of a nonlinear transformation and state feedback(feedback linearization) reduces the nonlinear control design. To demonstrate its effectiveness, an experimental study of this controller is presented. Two sets of fuzzy rule bases are utilized to represent the equivalent control input with unknown system functions of the main target. The membership functions of the THEN-part, which is used to construct a suitable equivalent control of SMC, are changed according to the adaptive law. With such a design scheme, we not only maintain the distribution of membership functions over state space but also reduce computing time considerably.

• Advances in aircraft and spacecraft science
• /
• 제6권5호
• /
• pp.371-389
• /
• 2019

The implementation of a robust $H_{\infty}$ Control, which is numerically efficient for uncertain nonlinear dynamics, on longitudinal and lateral autopilots is realised for a quarter scale Piper J3-Cub model accepted as an unmanned aerial vehicle (UAV) under the condition of sensor noise and disturbance effects. The stability and control coefficients of the UAV are evaluated through XFLR5 software, which utilises a vortex lattice method at a predefined flight condition. After that, the longitudinal trim point is computed, and the linearization process is performed at this trim point. The "${\mu}$-Synthesis"-based robust $H_{\infty}$ control algorithm for roll, pitch and yaw displacement autopilots are developed for both longitudinal and lateral linearised nonlinear dynamics. Controller performances, closed-loop frequency responses, nominal and perturbed system responses are obtained under the conditions of disturbance and sensor noise. The simulation results indicate that the proposed control scheme achieves robust performance and guarantees stability under exogenous disturbance and measurement noise effects and model uncertainty.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2031-2042
• /
• 2017

In this paper, a novel traffic flow control method based-on ramp metering and speed regulation using an adaptive sliding mode control (ASMC) method along with a deadzoned parameter adaptation law is proposed at a stochastic macroscopic level traffic environment, where the influence of the density and speed disturbances is accounted for in the traffic dynamic equations. The goal of this paper is to design a local traffic flow controller using both ramp metering and speed regulation based on ASMC, in order to achieve the desired density and speed for the maintenance of the maximum mainline throughput against disturbances in practice. The proposed method is advantageous in that it can improve the traffic flow performance compared to the traditional methods using only ramp metering, even in the presence of ramp storage limitation and disturbances. Moreover, a prior knowledge of disturbance magnitude is not required in the process of designing the controller unlike the conventional sliding mode controller. A stability analysis is presented to show that the traffic system under the proposed traffic flow control method is guaranteed to be uniformly bounded and its ultimate bound can be adjusted to be sufficiently small in terms of deadzone. The validity of the proposed method is demonstrated under different traffic situations (i.e., different initial traffic status), in the sense that the proposed control method is capable of stabilizing traffic flow better than the previously well-known Asservissement Lineaire d'Entree Autoroutiere (ALINEA) strategy and also feedback linearization control (FLC) method.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.54-64
• /
• 2015

본 논문에서는 DACS(Divert and Attitude Control System)를 장착한 KV(kill vehicle)의 비선형 가속도 조종루프 설계에 대해서 다룬다. ACS(Attitude Control System)는 받음각을 0으로 유지시키는 추력을 유발시키며, 받음각 제어를 위해 ACS를 제어명령으로 사용하는 궤환선형화 기반 비선형 받음각 조종루프를 제안한다. 받음각이 0인 조건에서는 비행경로각과 자세각이 일치하기 때문에 DCS(Divert Control System)는 유도루프에서 요구하는 측방향 가속도를 직접 생성하도록 제어한다. 이러한 방식에서는 추력에 의한 공력간섭 효과를 최소화 시킬 수 있으며, DCS와 ACS의 운용로직을 단순화 시킬 수 있다. 수치 시뮬레이션을 통해 제안한 기법의 성능을 검증한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권1호
• /
• pp.105-110
• /
• 2017

이 논문에서는 해상에서의 환경 하중과 외력을 고려한 해상 크레인의 상하 동요 보상 시스템에 대해 연구한 내용을 소개한다. 이를 위해 강체라 가정된 해상 크레인과 유압 구동식 윈치, 탄성력을 갖는 로프, 그리고 로프 끝단의 중량물로 구성된 동역학 모델을 먼저 살펴본다. 중량물의 상하 동요 움직임을 보상하기 위해, 선형화를 통한 PD 제어를 적용했다. 또한, 비선형 시스템에 맞춘 슬라이딩 모드 제어기 및 시간 지연을 고려한 비선형 일반 예측 제어 알고리즘을 사용한 제어를 적용했으며, 그 결과 진동폭이 줄어듬을 확인할 수 있다. 결과적으로, 1초의 시간 지연을 고려하여 설계한 강인 제어기를 활용하게 되면, 상하동요 보상시스템에서 오차를 가장 많이 줄여서 본 시스템에 적합한 제어 알고리즘으로써 활용할 수 있음을 볼 수 있다.

• 수산해양기술연구
• /
• 제31권2호
• /
• pp.178-189
• /
• 1995

병렬형 도립진자를 수학적으로 모델링하고 주파수 응답법에 의해 파라미터를 동정하여, $H_\infty$제어이론 중 혼합감도문제에 의거하여 제어계를 설계한 후 응답 시뮬레이션을 한 결과그 응답으로부터 모델링의 불확실성에 대처할 수 있는 강인한 제어계를 구성할 수 있었다. 앞으로 실제 시스템에 대하 s제어들 과제로 남겨두고 있다. 시뮬레이션 응답과는 달리 실제 으답실험에서도 좋은 결과를 얻기 위해서는 여러 가지의 어려움이 있을 것으로 예상된다. 특히 응답 시뮬레이션에서도 나타난 바와 같이 전자가 미소각으로 기울어진 상태에서 제어를 할 경우에도 각 상태의 변동량이 크고, 또한 상당한 제어입력을 요한다. 따라서 센서 잡음에 대한 영향을 충분히 고려할 필요가 있으므로, 노이즈를 많이 발생시키는 PWM방식의 직류모터 구동 드라이버보다는 선형 드라이버를 이용하는 것이 적절할 것으로 예상된다

• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.60-67
• /
• 2007

A signal conditioning circuit for capacitive displacement sensors was developed using a high frequency modulation/demodulation method, and its performance was evaluated. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. The developed signal processing circuit consists of three parts: linearization, modulation/demodulation, and nonlinearity compensation. Each part was constructed discretely using several IC chips and passive elements. An evaluation system for precision displacement sensors was developed using a laser interferometer, a precision stage, and a PID position controller. The signal processing circuit was tested using the evaluation system in the respect of resolution, repeatability, linearity, and so on. From the experimental results, we know that a highly linear voltage output can be obtained successfully, which is proportional to displacement and the nonlinearity of output is less than 0.02% of full range. However, in the future, further investigation is required to reduce noise level and phase delay due to a low-pass filter. The evaluation system also can be applied effectively to calibration and evaluation of precision sensors and stages.