• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.169-176
• /
• 2005

Many RC building structures of multiple uses constructed in Korea have the irregularities of torsion and soft story at bottom stories. A typical irregular building was selected as prototype and shaking table tests were performed to investigate the seismic performance of this building. The objective of this study is to evaluate the correlation between the experimental and analytical responses of this irregular building structure subjected to the earthquake excitation by using OpenSees(Open System for Earthquake Engineering Simulation). The results of analyses simulate well the effect of axial forces on the shear force of column and axial deformation. However, some discrepancy between analytical and experimental results in the distribution of shear forces and overturning deformation were observed.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.437-444
• /
• 2005

An equivalent linearization technique based on Rayleigh peak distribution for friction damper and brace system (FDBS) under stochastic excitation is proposed. For verification, shaking table test of a small scale 3-story building model with the FDBS is conducted for various slip moment levels. Using experimental result, equivalent linearization of the FDBS is conducted based on Rayleigh peak distribution, which is compared with measured peak distribution. For comparative study, model updating technique is applied based on identified modal properties. Finally, complex modal analysis and time history analysis for the obtained equivalent linear systems are conducted and compared with experimental result.

• Communications for Statistical Applications and Methods
• /
• v.16 no.4
• /
• pp.697-705
• /
• 2009

The Pearson chi-squared statistic or the deviance statistic is widely used in assessing the goodness-of-fit of the generalized linear models. But these statistics are not proper in the situation of continuous explanatory variables which results in the sparseness of cell frequencies. We propose a goodness-of-fit test statistic for the cumulative logit models with ordinal responses. We consider the grouping of a dataset based on the ordinal scores obtained by fitting the assumed model. We propose the Pearson chi-squared type test statistic, which is obtained from the cross-classified table formed by the subgroups of ordinal scores and the response categories. Because the limiting distribution of the chi-squared type statistic is intractable we suggest the parametric bootstrap testing procedure to approximate the distribution of the proposed test statistic.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.96-98
• /
• 1996

Welding of corner area across the edge is a difficult problem in robotized arc welding system, especially when continuously-welded leakage-proof product is required. This paper presents the methodology of cooperation plan of an arc welding robot and 1 or 2 axis welding manipulators for corner area welding. Welding trajectory for the robot is generated using clothoid curves; symmetrical double clothoid curve or unsymmetrical clothoid curve depending on the nature of the workpiece. The clothoid curve is first formulated for the case of linear type positioning table and then applied to the case of rotary type manipulator. The methodology is then illustrated for practical downhand welding situations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.538-543
• /
• 2011

In this paper, optimal spot weld layout design of the shock tower structure is performed for increasing fatigue life of spot weld and fatigue life of shock tower simultaneously. To predict the fatigue life, linear static analysis is conducted then fatigue analysis is performed by applying random vibration load. To optimize the spot weld layout, design variables that have an effect on spot weld fatigue life are selected. Based on the DOE table, spot weld fatigue analysis is conducted. Finally, response surface model is made from fatigue analysis results and optimized spot weld layout model which increases fatigue life of sport weld and fatigue life of shock tower is determined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.291-292
• /
• 2006

Currently A demand of high precision workpiece is increasing in industry. At present, roundness measuring machine using Air bearing, coordinate measuring machine that are used from measurement station. but these machines will not be able to apply to In-line process. because of like these machine's price are very expensive and measurement time is long. also, the complexity of conventional roundness measurement method based on fourier transform, it makes difficult to development analysis program. This work present new architecture of a Out-diameter measuring system fur analysis of roundness of product. In this system, the influence of table motion errors is minimize by using two LVDT sensor and knife edge contact tip. We are produce a test machine and make an experimenter on Out-diameter of test bearing. The measurement result compared with roundness measuring machine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.417-422
• /
• 2002

The main purpose of this paper is to determine the dynamic optimal shapes of tapered column with constant volume. The linear, parabolic and sinusoidal tapers with the regular polygon cross-section are considered, whose material volume and span length are always held constant. The ordinary differential equation including the effect of axial load is applied to calculate the natural frequencies. The Runge-Kutta method and Regula-Falsi methods are used to integrate the differential equation and compute the frequencies, respectively. Then the dynamic optimal shape whose lowest natural frequency is highest is determined by reading the critical value of the frequency versus section ratio curve plotted by the frequency data. In the numerical examples, the tapered columns are analysed and the numerical result of this study are shown in table and figures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.647-655
• /
• 2003

This paper studies the observability of calibration system with a constraint movement by a constraint operator. The calibration system with the constraint movement need only simple sensing device to check whether the constraint movements are completed within an established range. However, it yields the concern about the poor parameter observability due to the constraint movements. This paper uses the QR-decomposition to find the optimal calibration configurations maximizing the linear independence of rows of a observation matrix. The number of identifiable parameters are examined by the rank of the observation matrix, which represents the parameter observability. The method is applied to a parallel typed machining center and the calibration results are presented. These results verify that the calibration system with low-cost indicators and simple planar table is accurate as well as reliable.

• Communications for Statistical Applications and Methods
• /
• v.4 no.3
• /
• pp.725-734
• /
• 1997

많은 사회과학 조사에서 분할표 형태로 얻어진 범주형 자료에는 오분류(misclassification)로 인한 오차가 내재되는 경우가 종종 있다. 질적속성 추정을 위한 확률화응답은 이러한 오분류 문제의 한 특수한 경우로 여겨지기도 한다. 그래서 확률화응답을 통한 범주형자료는 혼합된 분할표(mixed-up contingency table)로 여길 수 있는 바, 본 논문에서는 이에 대해 대수선형모형(log-linear model)을 설정하고 Chen과 Fienberg(1976)의 Iterative scaling procedure(ISP)에 의하여 얻어진 최우추정량의 극한을 이용하였다. 이 결과 Warner(1965) 형태의 대칭기법에 대해서는 Singh(1976)에 의하여 제안된 최우추정량과 같아지게 됨을 보임으로써 Warner에 의해서 제시된 추정량이 최우추정량으로 적절하지 않음을 확인해 보고, 무관질문기법에 대해서는 Greenberg, et al.(1969)에 의해서 제안된 추정량이 추정의 관점에서 최우추정량으로 적절하지 않음을 알아 보았다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.49-52
• /
• 2011

본 논문에서는 구간선형 모델을 적용하여 낮은 복잡도를 가지는 LSC(Lens-Shading Correction) 알고리즘을 제안한다. 제안한 알고리즘은 각 화소와 렌즈 중심점으로부터 거리를 정수형으로 계산하고, 이 정수를 거리에 대한 LSC 이득값이 저장된 LUT(Look-Up Table)에 대한 주소로 적용하여, 입력 화소 값에 곱함으로써 LSC를 수행한다. 거리를 구하려면 제곱근 회로가 추가되어야 한다. LUT에 저장된 이득값은 원점으로부터의 거리에 대한 평균 이득값을 저장하고 있기 때문에, 제곱근 계산에 높은 정밀도를 할애하여도 LSC 보상된 영상의 화질에 미치는 영향은 높지 않으므로 정수형 제곱근 연산을 수행한다. 제곱근 계산은 구간 선형화하여 단지 덧셈과 쉬프트 연산만으로 제곱근 연산을 완료할 수 있도록 간략화 하였다. 제안한 알고리즘을 양산 중인 일반 카메라 모듈에 적용한 결과, 카메라모듈 제조업체의 LSC 평가 기준을 상회하는 수준으로 나타나며, 구현될 하드웨어 복잡도가 매우 낮아서 모바일 카메라 구현에 매우 적합하다.