• Asian-Australasian Journal of Animal Sciences
• /
• 제27권3호
• /
• pp.383-390
• /
• 2014

A 15-wk feeding trial was conducted to examine the supplemental effects of Barodon on growth performance, gastrointestinal histology, feed digestibility and innate immunity in olive founder. A basal commercial diet was used as a control and two other diets were prepared by spraying 0.1% or 0.2% of Barodon. Triplicate groups of fish (BW, 145 g) were fed one of the test diets to apparent satiation twice daily. At the end of the feeding trial, fish growth performance was not significantly affected by dietary treatments; however, feed utilization was significantly improved (linear and quadratic, p<0.05) by Barodon supplementation. Significantly higher (p<0.05) survival rates were obtained in fish fed Barodon containing diets. Hepatosomatic index increased significantly in Barodon treated groups. Also, the use of Barodon resulted in significant increase (linear and quadratic, p<0.05) of intestine length and number of goblet cells. Significantly higher (Quadratic, p<0.05) apparent digestibility coefficient of DM was obtained by supplementation of Barodon. Lysozyme and myeloperoxidase activities increased quadratically and linearly, respectively, in Barodon treated fish. Also, significantly higher (linear and quadratic, p<0.05) superoxide dismutase activity was found in Barodon fed fish. The findings in this study show that inclusion of Barodon in diets for olive flounder improves feed utilization and digestibility, and positively affects digestive tract histology and innate immunity.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.

• 한국전자파학회논문지
• /
• 제26권7호
• /
• pp.606-612
• /
• 2015

본 논문에서는 차량 내부 단말 통신을 위한 이중대역 직교편파 마이크로스트립 안테나를 제안하였다. 제안한 안테나는 서로 수직한 선형 편파를 형성하기 위한 수직한 이중 급전 부분과 이중대역 동작을 구현하기 위한 H 모양의 폐루프형 슬롯이 구비된 방사체로 구성된다. 방사체에 구비한 H 모양의 폐루프형 슬롯은 방사체의 각 변의 급전 부분에 따라 기하학적으로 다른 효과를 발생시키기 때문에, 제안한 안테나는 두 개의 동작 주파수에서 서로 수직한 선형 편파로 동작한다. 제안한 안테나는 1.8 GHz에서 지표면에 수직한 선형 편파와 2.4 GHz에서 지표면에 수평한 선형 편파로 동작함을 이론 및 실험적으로 검증하였다. 제작한 안테나의 모의실험과 측정실험 결과는 반사 계수, 방사패턴 및 안테나 이득에서 잘 일치되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.99-104
• /
• 2004

Micro/meso cutting is getting more important in the fields of precision machining technology. A micro-turning lathe is one of parts to consist the Micro Factory. It accepts stepwise motion actuators that are used for feeding system instead of the conventional mechanism. It is consisted of two Piezoelectric ceramics; one is for feeding the slider, and the other is for clamping the slider in the guide way of the body. The linearity and positional accuracy of the actuators are good enough for high precision motion. The spindle unit is operated with DC motor on the top of the slider. The motion is communicated with miniaturized linear encoder attached on each side of axis. A mono crystal diamond tool is used for cutting tool. This micro-lathe has been made a machining experiment to see the characteristics of micro-machining.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1327-1331
• /
• 2004

In this paper constant power models for electric trains have been used to analyze the steady states of the AT feeding systems. There are some previous studies utilizing constant impedance models or constant current models. These mentioned models are easy to use, but even so they don't yield exact results because of the innate restraints of the models since linear models cannot represent the characteristic of constant power in inverter-driven trains. It is reasonable that the train be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. Nonlinear equations which reflect constant power model for train have been developed by considering mutual impedances between wires and AT's turn-ratio of 1:1, then these equations have been solved by N-R iterative method. The proposed method doesn't need any specific assumptions through either the process of developing equations or the process of acquiring solutions, so it can be said to be stricter than other conventional methods.

• Journal of Animal Science and Technology
• /
• 제56권1호
• /
• pp.4.1-4.7
• /
• 2014

The effect of sodium and sodium salts on carcass and body organ characteristics of broilers under a four phase feeding program were investigated. A basal diet (0.08% dNa with NaCl) was formulated and one of two sources of dNa ($NaHCO_3$ and $Na_2SO_4$) were supplemented to obtain four different percentages of dNa (0.17, 0.26, 0.35, and 0.44%) for each treatment. There was a linear decrease in dressing percentage (DP) with source ${\times}$ level interaction ($p{\leq}0.001$), while there was a linear increase in breast yield and thigh yield with increasing dNa supplementation ($p{\leq}0.001$). Chicks fed 0.35% $NaHCO_3$ and 0.44% dNa $Na_2SO_4$ supplemental salts had lower abdominal fat ($p{\leq}0.04$). Chicks that received increasing levels of dNa (from 0.17 to 0.44%) showed increasing gizzard weight ($p{\leq}0.02$) and decreasing spleen weight ($p{\leq}0.02$). When both salts were supplemented at 0.26% dNa, the chicks showed their lowest bursa weight ($p{\leq}0.001$). Consequently, chicks at higher dNa showed an increase in breast and thigh meat yield, and increasing capacity of their digestive organ. The higher levels of dNa should be tested with other cations and anions to fully understand acid base homoeostasis.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권11호
• /
• pp.1614-1623
• /
• 2015

The objectives of the current experiment were to study the response of the growth performance of early finishing gilts to different net energy (NE) concentrations in diets, and to compare the NE values of diets between calculated NE values and measured NE values using French and Dutch CVB (Centraal Veevoederbureau; Central Bureau for Livestock Feeding) NE systems. In a metabolism trail, the NE concentrations in five diets used for the growth trial were determined based on digestible nutrient concentrations, digestible energy, and metabolizable energy using a replicated $5{\times}5$ Latin square design with 10 barrows (initial body weight [BW], $39.2{\pm}2.2kg$). In a growth trial, a total of 60 early finishing gilts (Landrace${\times}$Yorkshire; initial BW, $47.7{\pm}3.5kg$) were allotted to five dietary treatments of 8.0, 9.0, 10.0, 11.0, and 12.0 MJ NE/kg (calculated, as-is basis) with 12 replicate pens and one pig per pen in a 42-d feeding experiment. The NE and amino acid (AA) concentrations in all diets were calculated based on the values from NRC (2012). Ratios between standardized ileal digestible AA and NE concentrations in all diets were closely maintained. Pigs were allowed ad libitum access to feed and water. Results indicated that calculated NE concentrations in diets (i.e., five dietary treatments) were close to measured NE concentrations using French NE system in diets. The final BW was increased (linear and quadratic, p<0.05) with increasing NE concentrations in diets. Furthermore, average daily gain (ADG) was increased (linear and quadratic, p<0.01) with increasing NE concentrations in diets. There was a quadratic relationship (p<0.01) between average daily feed intake and NE concentrations in diets. Feed efficiency (G:F) was also increased (linear, p<0.01) as NE concentrations in diets were increased. The NE intake per BW gain (kcal NE/kg of BWG) was increased (linear, p<0.01) with increasing NE concentrations in diets that were predicted from both French and Dutch CVB NE systems. Linear regression indicated that predictability of daily NE intake from the BW of pigs was very low for both French ($R^2$, 0.366) and Dutch CVB ($R^2$, 0.374) NE systems. In conclusion, increasing NE concentrations in diets increase BW, ADG, G:F, and NE intake per BW gain of early finishing gilts. The BW of early finishing gilts is not a good sole variable for the prediction of daily NE intake.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.328-328
• /
• 2004

최근의 생산시스템은 수요자의 요구에 맞추어 다종소량화 경향이 뚜렷해지고 부품 또는 제품의 다기능화 및 소형화가 급속하게 진전되고 있으며, 여기에 보조를 맞추어 제품의 고정밀화가 그 어느 때보다 강하게 요구되고 있다. 이에 따라 공작기계를 이용한 정밀 가공기술의 필요성이 증가하게 되었고 공작기계가 공작물의 가공정도에 미치는 영향에 대한 평가가 많은 관심을 모으고 있다. 이는 가공된 공작물의 정밀도는 그것을 가공한 공작기계의 정밀도에 의해 좌우되기 때문이다.(중략)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.226-227
• /
• 2001

일반거주지역의 초고속 광가입자망 구축을 위해 B-PON(Broadband Passive optical network)시스템과 이를 위한 급전방안으로 공유급전이 고려되고 있다. 한곳의 Power-Node가 최대 32개의 ONU에 전력을 공급하기 위해서는 고 전위의 구동 source가 필요하게 된다. 고압실현을 위하여 검토되는 회로는 범용으로 사용되는 linear 방식보다는 SMPS(Switching Mode Power Supply)방식의 소형경량화의 회로를 채택하며, 고 용량화에 수반되는 역률 문제를 보상하고, 고효율을 실현하여 전체시스템의 전력밀도의 극대화를 이루었다.

• 제어로봇시스템학회논문지
• /
• 제15권7호
• /
• pp.675-682
• /
• 2009

Instead of direct driving like BLDC, the induction principle is adopted as a driving one for planar stage. The stage composed of four linear induction motors put in square type is activated by two-axial forces; low-frequency attractive force and thrust force of the linear induction motors. Here, the modified vector control whose new inputs are q-axis current and dc current biased to three phase current instead of d-axis current or flux current is applied extensively to overall motion of the stage. For the developed system, the precision step test and the constant velocity test are tried to guarantee its feasibility for TFT-LCD pattern inspection. However, to exclude a discontinuity due to phase shift and minimize a force ripple synchronized with the command frequency, the initial system is revised to the antagonistic structure over the full degree of freedom. Concretely describing, the porous air bearings guide an air-gapping of the stage up and down and a pair of liner induction motors instead of single motor are activated in the opposite direction each other. The performances of the above systems are compared from trapezoid tracking test and sinusoidal test.