• 한국광학회지
• /
• 제5권1호
• /
• pp.138-143
• /
• 1994

거친 표면을 가진 물체의 미소변위를 1차원 CCD소자와 레이저 스펙클(laser speckle) 방법을 이용하여 측정하였다. 거친 표면에서 산란된 레이저 광이 이루는 스펙클 무늬를 물체의 이동 전후에 얻고, 그것의 상호상관함수(cross-correlation)를 계산하여 스펙클 변위를 계산한다. 1차원 CCD소자를 이용하여 물체이동 전후의 스펙클 무늬를 측정하고, 레이저 스펙클 변위값을 386 PC로 인터페이스하여 PC에서 계산한다. 사용한 CCD 소자의 화소 간격은 $15\mu\textrm{m}$이고, 화소의 개수는 1728개이다. 스펙클 변위와 물체의 이동거리와는 비는 레이저 빔의 파면의 곡률에따라 1.03으로부터 5.20까지 변화한다. CCD 픽셀의 간격이 $15\mu\textrm{m}$이므로 물체의 $3\mu\textrm{m}$ 이동을 감지해 낼 수 있다.

• 정보처리학회논문지A
• /
• 제10A권3호
• /
• pp.207-214
• /
• 2003

계층적 자료구조인 사진트리는 이진 영상을 표현하는데 매우 중요한 자료구조이다. 사진트리를 메모리에 저장하는 방법 중 선형사진트리 표현 방법은 다른 표현 방법과 비교할 때 저장 공간을 매우 효율적으로 절약할 수 있는 이점이 있기 때문에 사진트리와 관련된 연산의 수행을 위해 선형 사진트리를 사용하는 효율적인 알고리즘 개발에 많은 연구가 진행되어 왔다. 선형이동은 영상을 주어진 거리만큼 이동시키는 연산으로, 영상 처리의 응용에서 중요하게 사용되는 연산에 속한다. 본 논문에서는 RMESH (Reconfigurable MESH) 구조에서 3-차원 n${\times}$n${\times}$n 프로세서를 사용하여 선형 사진트리로 표현된 이진 영상의 선형 이동을 수행하는 효율적인 알고리즘을 제안한다. 이 알고리즘은 n${\times}$n${\times}$n RMESH의 계층구조에서 선형 사진트리의 위치코드들을 효율적으로 전송할 수 있는 기본적인 연산들을 이용함으로써 상수 시간의 시간 복잡도를 갖는다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.876-881
• /
• 2008

When biped robots speed up to run and reduce speed to walk after running, it needs stable speed translation. This paper proposed simple speed translation using the modified LIPM (Linear Inverted Pendulum Mode). We can change stride and period time of a biped robot in some bounded sets with this propose algorithm. This method is simple and effective in simulation.

• 한국진공학회지
• /
• 제15권5호
• /
• pp.512-517
• /
• 2006

신뢰도 높은 나노 직선 이동장치를 제작하였다. 장치는 기본 몸체에 고정된 6개의 피에조 다리들과 이들이 붙잡고 있는 사파이어 육각기둥으로 이루어 졌다. 특정한 전압파형을 피에조 다리에 인가하여 피에조 다리를 순차적으로 움직임으로 육각기둥을 앞으로 혹은 뒤로 움직인다. 직선 이동장치를 지표면에 수직 방향으로 시험구동 하였다. 육각기둥이 수 mm를 움직이는 동안 속도가 일정함을 확인하였다. 위쪽으로 올라가는 가장 느린 속도는 $1.7{\times}10^{-6}m/s$, 즉 ${\sim}28.3nm$/걸음이었고 아래쪽으로 내려가는 가장 느린 속도는 중력의 도움을 받아 ${\sim}3.7{\times}10^{-6}m/s$, 즉 ${\sim}61.7nm$/걸음 이었다. 피에조에 인가된 전압을 증가시키면 육각기둥의 이동속도가 선형으로 증가하였다. 이 직선 이동장치를 주사형 터널링 현미경의 접근 장치로 사용할 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.311-314
• /
• 1997

According to the development of industrial equipment such as semiconductor manufacturing machines, optical device, and precision machine tool, a high-precision translation system with wide range has been required. This paper describes a high-precision 2-axis translation system, which consists of microstage and global stage. In order to achieve the highresolution in the long range, some engineering techniques are used. Three linear guides with flexible coupling are adopted to reduce the motor vibration in the global stage. A simple elastic hinge structure activated by five PZT is applied to reduce the angular dev~atlon. As the result of combination of microstage and global stage associated with some engineering techniques, the 2-axis translation system can measure the 200 X 200 mrn range with the nanometer accuracy.

• Journal of Information Processing Systems
• /
• 제17권1호
• /
• pp.203-212
• /
• 2021

To eliminate ambiguities in the existing methods to simplify Chinese pronunciation learning, we propose a model that can predict the pronunciation of Chinese characters automatically. The proposed model relies on a statistical machine translation (SMT) framework. In particular, we consider the components of Chinese characters as the basic unit and consider the pronunciation prediction as a machine translation procedure (the component sequence as a source sentence, the pronunciation, pinyin, as a target sentence). In addition to traditional features such as the bidirectional word translation and the n-gram language model, we also implement a component similarity feature to overcome some typos during practical use. We incorporate these features into a log-linear model. The experimental results show that our approach significantly outperforms other baseline models.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.109-114
• /
• 2000

A new method for the determination of camera system rotation and translation from in 3-D space using recursive least square method is presented in this paper. With this method, the calculation of the equation is found by a linear algorithm. Where the equation are either given or be obtained by solving five or more point correspondences. Good results can be obtained in the presence if more than the eight point. A main advantage of this new method is that it decouple rotation and translation, and then reduces computation. With respect to error in the solution point number in the input image data, adding one more feature correspondence to required minimum number improves the solution accuracy drastically. However, further increase in the number of feature correspondence improve the solution accuracy only slowly. The algorithm proposed by this paper is used to make camera system rotation and translation easy to recognize even when camera system attached at end effecter of six degrees of freedom industrial robot manipulator are applied industrial field.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.78-84
• /
• 2001

The translation system is made up of springs, masses and a dashpot. This precise piece of equipment is controlled electro-mechanically by a motor and operating program. The control strategy of the system can be changed by spring stiffness, change of mass, and the damping coefficient of the dashpot. This system proves the necessity and effect of a closed loop control. In this paper, PD control experiments were implemented for the translation system. When the north falter was added on the PD controller, we compared the response characteristics of the two systems. The state feedback controller minimized scalar control gains and the resulting response characteristics of the system were studied using the LQR design. Finally, we improved the response characteristics of the translation system which are rising time, settling time, steady state error, and overshoot LQR was better as compared with PD control.

• The Journal of Korean Physical Therapy
• /
• 제26권2호
• /
• pp.97-103
• /
• 2014

Purpose: The aim of this study was to clarify the gender difference during standing balance in accordance with recruitment of abdominal muscles against sudden support surface translation. Methods: Twenty healthy males (n = 10, $26.50{\pm}3.54$ years, $170.60{\pm}6.30cm$, $72.80{\pm}5.69kg$) and females (n = 10, $24.40{\pm}2.63$ years, $163.00{\pm}4.97cm$, $52.10{\pm}4.41kg$) participated in the study. Each subject performed standing balance task on a platform, which moved in the anterior and posterior direction, with a total of 18 trials in three abdominal conditions (resting, hollowing, and bracing). We analyzed angular displacement of thoracic and lumbar spine and linear displacement of center of mass for evaluatione of spinal stability and standing balance, respectively. Results: Angular displacement of thoracic and lumbar spine and linear displacement of center of mass did not differ significantly between female and male in all conditions. Conclusion: Our results indicate that the ability to maintain spinal stability and standing balance were similar between male and female regardless of the abdominal contractile conditions and the direction of support surface translation.

• Journal of Astronomy and Space Sciences
• /
• 제11권2호
• /
• pp.273-280
• /
• 1994

A linear method for determining three-dimensional motion of a rigid object is presented. In this method, two three-dimensional line correspondences are used. By using three-dimensional information of the features and observing that the rotation is unique regardless of the translation vector, the two components of motion parameters (rotation and translation) are computed separately. Also in this paper, the solution is given without a scale factor which is necessary in other methods that use only the two-dimensional projective constraints.