• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.269-278
• /
• 2018

국내 BIM기술은 건축공사를 중심으로 적용되고 있으나, 최근 정부에서 인프라시설물 BIM적용 의무화를 검토하고 있으므로 토목공사까지 급속히 확대 적용될 것으로 예상된다. 인프라시설물은 광범위한 수평적 공간에서 공정이 진행되므로 BIM기술의 적용은 설계단계의 간섭관리보다는 시공단계의 공정관리 등 사업관리 전반에서 더욱 활용성을 갖게 된다. 4D CAD시스템은 시공단계의 공정관리에 적용되는 대표적인 BIM기술이나 실무적으로 활용할 수 있는 기능의 부족으로 실제 프로젝트에 적용되는 사례는 제한적이다. 본 연구에서는 상용화된 대표적인 4종류의 4D CAD시스템의 기능을 비교분석하여 프로젝트 특성별 선택 기준을 제공하고 실무적 활용성을 갖기 위해 개선되어야 할 기능을 분석하였다. 기능 분석결과로서 시스템별 장단점을 제시하였으며 시스템별 특성 분석으로 사용자의 활용 편리성을 제시하였다. 또한 토목시설물에 적용 가능한 기능 개선을 위하여 선형 4D시뮬레이션 방법론을 개발하여 인프라 시설물의 시공단계 BIM으로 활용성을 높일 수 있는 방안을 제시하였다. 철도 및 도로시설 공사에서 토공, 교량, 터널 등의 대부분 공정들은 수평적 공간에서 거리 축에 따라 작업이 진행된다. 따라서 단순히 기존 Gantt chart 방식의 4D 표현방법보다는 거리 축에 따라 공정이 표현되는 선형 4D 시뮬레이션 방법이 보다 실무적으로 도움이 될 수 있다.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.356-362
• /
• 2007

Magnetostrictive materials have been used for linear actuators due to its large strain, large force output with moderate frequency band in the presence of magnetic field. However their performance analysis is difficult because of nonlinear material behaviors in terms of coupled strain-magnetic field dependence, nonlinear permeability, pre-stress dependence and hysteresis. This paper presents a finite element analysis technique for magnetostrictive linear actuator. To deal with coupled problems and nonlinear behaviors, a simple finite element approach is proposed, which is based on separate magnetic field calculation and displacement simulation. The finite element formulation and an in-house program development are illustrated, and a simulation model is made for a magnetostrictive linear actuator. The fabrication and performance test of the linear actuator are explained, and the performance comparison with simulation result is shown. Since this approach is simple, it can be applied for analyzing magnetostrictive underwater projectors and ultrasonic transducers.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.606-616
• /
• 2003

A numerical analysis has been conducted in order to simulate the characteristics of complex flow through linear cascades of high performance turbine blade with/without tip clearance by using a pressure-correction based, generalized 3D incompressible Wavier-Stokes CFD code. The development and generation of horseshoe vortex, passage vortex, leakage vortex, tip vortex within tip clearance, etc. are clearly identified through the present simulation which uses the RNG k-$\varepsilon$ turbulent model with wall function method and a second-order linear upwind scheme for convective terms. The present simulation results are consistent with the generally known tendency that occurs in the blade passage and tip clearance. A 3D model for secondary and leakage flows through turbine cascades with/without tip clearance is also suggested from the present simulation results, including the effects of tip clearance height.

• 드라이브 ㆍ 컨트롤
• /
• 제9권4호
• /
• pp.1-7
• /
• 2012

The voice coil linear force motor is a kind of a direct drive motion device that uses a permanent magnetic field and coil winding to produce force. In order to design a voice coil linear force motor, an exact calculations of the required force, the flux density in air gap and the flux pathway are needed. A conventional method can be used usually to calculate the flux density in air gap, but with this method it is needed to find a magnetic circuit revision constant. In this paper a voice coil linear force motor is designed by conventional design method and analyzed by 3D simulation program "Flux". For the prototype linear force motor, the results of the calculated by conventional design method and the analyzed by 3D simulation program are compared with the test result. Finally it is showed that the magnetic circuit revision constant which is found by comparing of the analyzed and the measured data can be used for the design of the voice coil type linear force motor to minimize the trial and error.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.226-233
• /
• 2018

Elastomers based on the thermoplastics are widely used in rubber industries. Thermoplastic elastomers have the advantages of an easy shaping process and elimination of recycling problems. Thermoplastic polyester elastomer (TPE) is used for making rubber bands in wearable devices and its applications are increasing. In this study, five wrist bands were designed and their mechanical behaviors were examined by computer simulation, using hyper elastic models, Mooney-Rivlin and Ogden models, and a linear elastic model. Simulation results were compared and discussed in terms of band design and material model.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.567-572
• /
• 2015

Discharge characteristics of linear microwave plasma were investigated by using fluid simulation of 2D axis-symmetry based on finite elements method. The microwave power was 2.45 GHz TEM mode and transmitted through linear antenna. Resistive power and pressure were considered simulation variables and argon was used for working gas. A decrease of electron density along the quartz tube was observed in low power condition but relatively uniform plasmas were generated in chamber by increasing the resistive power. The electron temperature was highly detected near the surface of quartz tube because the electron was heated only dielectric surface. The power transmission efficiency decreased and characteristics of surface plasma were observed in high electron density condition.

• Genomics & Informatics
• /
• 제17권4호
• /
• pp.39.1-39.20
• /
• 2019

Analyzing patterns in data points embedded in linear and non-linear feature spaces is considered as one of the common research problems among different research areas, for example: data mining, machine learning, pattern recognition, and multivariate analysis. In this paper, data points are heterogeneous sets of biosequences (composite data points). A composite data point is a set of ordinary data points (e.g., set of feature vectors). We theoretically extend the derivation of the largest generalized eigenvalue-based distance metric D_ij(γ₁) in any linear and non-linear feature spaces. We prove that D_ij(γ₁) is a metric under any linear and non-linear feature transformation function. We show the sufficiency and efficiency of using the decision rule $\bar{{\delta}}_{{\Xi}i}$(i.e., mean of D_ij(γ₁)) in classification of heterogeneous sets of biosequences compared with the decision rules min_𝚵iand median_𝚵i. We analyze the impact of linear and non-linear transformation functions on classifying/clustering collections of heterogeneous sets of biosequences. The impact of the length of a sequence in a heterogeneous sequence-set generated by simulation on the classification and clustering results in linear and non-linear feature spaces is empirically shown in this paper. We propose a new concept: the limiting dispersion map of the existing clusters in heterogeneous sets of biosequences embedded in linear and nonlinear feature spaces, which is based on the limiting distribution of nucleotide compositions estimated from real data sets. Finally, the empirical conclusions and the scientific evidences are deduced from the experiments to support the theoretical side stated in this paper.

• ETRI Journal
• /
• 제31권6호
• /
• pp.806-808
• /
• 2009

A new computationally efficient algorithm-based propagator method for two-dimensional (2-D) direction-of-arrival (DOA) estimation is proposed, which uses two parallel uniform linear arrays. The algorithm takes advantage of the special structure of the array which enables 2-D DOA estimation without pair matching. Simulation results show that the proposed algorithm achieves very accurate estimation at a computational cost 4 dB lower than that of standard methods.

• 한국조경학회지
• /
• 제14권3호
• /
• pp.3-19
• /
• 1987

The purpose of this study was to investigate desirable width / height ratio of enclosed space and to offer basic information for the design of enclosed spaces. The data of this study were gathered from the experiment through simulation. Photographic sampling of 7 campus sites located in Kwanak campus of Seoul National University and slides of perspective drawings of enclosed spaces with various D/H ratio (12, 1, 2, 4, 6, 9, 12)were used for simulation. A response format was made using the method of paired comparison and students from various departments were randomly selected for evaluation. In the method of analysis of data Thurstone's equation of Comparative Judgement was used for calculating preference score. A1so non-linear regression analysis was used for finding out relations between preference and D/H ratio. The other method of data analysis were correlation, Chi - test. And the results were summarized as follows. 1. In sketch simulation the ratio of D/H 4 got the highest preference store. This result suggests that desirable D/H ratio of enclosed space is D/H 4. And at the lower range of D/H ratio, as ratio increases, the preference score increases. At the higher range of D/H ratio, however, as ratio increases, the preference score starts to decrease from the cardinal point of D/H 4. 2. In campus photograph simulation preference is influenced by slope, elevation change of floor, trees, lawn area, familiarity, space arrangement, and exterior shape of building besides D/H ratio. 3. The preference virtue was not significantly affected by order effect. This result suggests that order effect can be ignored in the study of visual preference. 4. There are so many factors related to preference that it is difficult to explore those factors without scientific information based on scientific method. We must carry out study for scientific approach of planning and design based on precise, complete simulation technique.

• 한국통신학회논문지
• /
• 제33권9A호
• /
• pp.917-923
• /
• 2008

D-STTD 시스템은 Alamouti Code로 알려진 STTD기법을 적용하여 다이버시티 효과를 획득하면서 STTD기법을 병렬로 한번 더 사용함으로써 멀티플렉싱 효과도 얻을 수 있는 기법이다. 이러한 서로 다른 정보를 보내는 멀티플렉싱 효과로 인해 D-STTD는 기존 STTD 기법의 Combining 기법을 적용하는데 어려움을 가져온다. 그래서 본 논문에서는 MMSE 기법을 바탕으로 멀티플렉싱 검출 기법으로 잘 알려진 Linear 알고리즘, SIC 알고리즘, OSIC 알고리즘을 D-STTD 시스템에 적용하고 그 성능을 비교한다. 그리고 새롭게 MAP 알고리즘을 D-STTD 시스템에 적용하여 성능을 분석하고자 한다. 모의 실험 결과, Linear MMSE Detector보다 반복 알고리즘을 적용한 Detector가 최대 3.7dB의 성능향상을 보였다. 특히, 반복 Detector 중 MAP 알고리즘을 적용한 경우에는 약 4.4dB의 성능차까지 나타냈다.