• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1461-1470
• /
• 2012

This paper reports the contamination performance of transmission line porcelain insulators tested under five different contaminant conditions - clean and ESDD (equivalent salt deposit density) level (A, B, C, and D) through measurement of their leakage current under drop of potential method. To estimate the contamination for transmission line porcelain insulators, leakage current waveform and its maximum value were measured under step-up power test. In the clean insulators test, % distortion factors decreased with increasing step-up power, and as the ESDD level increased, some characteristics such as frequency analysis, harmonics and % distortion facotor could be used for contamination diagnosis of the transmission line porcelain insulators.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.1
• /
• pp.109-114
• /
• 1995

The purpose of this study was to investigate the changes of the shape of the panoramic innominate line and also to examine the relation of the panoramic innominate line to maxillary posterior wall according to positional changes in panoramic radiographs of the patients who had no pathoses in the maxillary sinus and adjacent bony structures. Thus these panoramic radiographs were obtained and evaluated in standard, forward 10mm, backward 10mm, chin down 10°, and chin up 10° positions. And the following results were obtained : 1. Panoramic innominate lines were not changed in shape according to various positional changes in panoramic radiography. 2. The panoramic innominate line was observed to be more clear images and decreased distance to the posterior wall of maxillary sinus at forward 10mm and chin down 10° positions. And the panoramic innominate line was observed more blurred images and increased distance to the posterior wall of maxillary sinus at backward 10mm and chin up 10° positions.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.317-329
• /
• 2002

This report was studied about system design of tilting car for speed up for conventional railroad of KNR. The maximum operating speed of Kyun-Pu line was recorded a 140km/h by saemaul train at 1985 and the average speed its is 107km/h now. The chungang line, janghang line and honam line of KNR had rebuilt to the electrified line for operation of tilting train. This report was described about the operation status of advanced countries, the operation situation of trains of KNR, system design for operation and speed up by EMU tilting train on the conventional railroad in the future.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.387-393
• /
• 1987

The introduction of a digiral subscriber loop transmission system necessitates an optimized line interface solution. To meet this objective an adaptive line equalizer has been developed. The equalizer can be compensated up to 42 dB line loss at 200KHz, and operated up to 3.2 Km transmission length (0.4 mm\ulcornercable)at a rate of 400Kb/s. This has been builted using a variable \ulcorner equalizer to compensate a frequency-attenuation characteristics of metallic cable, an AGC (automatic gain control) circuits with simple control algorithm, and various filters to minimize a transmission constraints over subscriber loop. The purpose of this paper is to present a short description of a design of the adaptive line equalizer with a summary of implementation results. Some design concepts and considerations which results in an implementation of the equalizer are also given.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.610-619
• /
• 2000

This paper presents an off-line UPS using the high temperature superconductive magnetic bearing. FES(Flywheel Energy Storage) system has good advantages in compare with lead acid battery. So, high efficiency FES using high temperature SMB(superconductive magnetic bearing) was composed in this paper. The outer rotor type of PMSM(Permanent Magnet Synchronous Motor) as motor/generator was used for the experiment, and square wave current and sinusoidal wave control methods was compared for high efficiency operation of motor/generator. The circuit for in phase sinusoidal wave current control with EMF in the full speed range was designed and the proposed flywheel energy storage system was applied in single phase off-line UPS system. As the stable operation characteristics of prototype system was confirmed, the its excellence as energy storage device in Off-line UPS was proved.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.4
• /
• pp.221-226
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.4
• /
• pp.221-221
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.123-131
• /
• 2009

The telecommunication technology in the 21st century has come up to the standard which could transmit various spatial information by means of on-line and the printing technology using computers has been on a par with presswork in quality. In addition, map users also would like to get various spatial information through on-line directly or indirectly. None the less, the supply system of national base map in our country has maintained the off-line sales method. It is owing to this reason that the nation's supply system has shown a high degree of inefficiency from the viewpoint of the inventory control, rapidity, and economical efficiency as compared with the on-line sales system in the developed countries. This study tried to analyze some problems of the present supply system in order to build up the foundation of the efficient map supply system and also developed the system such as On-demand maps, on-line paying and sales, inventory control, meta dat establishment, and security module, etc. This study tried to analyze some problems of the present supply system in order to build up the foundation of the efficient map supply system and also developed the system such as On-demand maps, on-line paying and sales, inventory control, meta dat establishment, and security module, etc.

• Journal of Distribution Research
• /
• v.15 no.3
• /
• pp.35-69
• /
• 2010

Successful management of distributors is crucial for the success of multi-level marketing (MLM) because MLM sells products and services through distributor networks. The present study examines the impact of the up-line distributors' transformational leadership on down-line distributors' entrepreneurship, market orientation, and performance. The proposed research questions were examined based on a survey of 135 down-line distributors working at the largest domestic MLM company. A mediation mechanism was found that the up-line distributors' transformational leadership increases the down-line distributors' entrepreneurship and market orientation, which in turn influences their performance. Based on the findings, the present study suggests the importance of transformational leadership in MLM. Practical implications for the roles of transformational leadership and its impact on corporate management in specific business areas are also discussed.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.140-143
• /
• 2007

Fingerprint Recognition System is made up of Off-line treatment and On-line treatment; the one is registering all the information of there trieving features which are retrieved in the digitalized fingerprint getting out of the analog fingerprint through the fingerprint acquisition device and the other is the treatment making the decision whether the users are approved to be accessed to the system or not with matching them with the fingerprint features which are retrieved and database from the input fingerprint when the users are approaching the system to use. In matching between On-line and Off-line treatment, the most important thing is which features we are going to use as the standard. Therefore, we have been using "Delta" and "Core" as this standard until now, but there might have been some deficits not to exist in every person when we set them up as the standards. In order to handle the users who do not have those features, we are still using the matching method which enables us to make up of the spanning tree or the triangulation with the relations of the spanned feature. However, there are some overheads of the time on these methods and it is not sure whether they make the correct matching or not. In this paper, introduces a new data structure, called Union and Division, representing binary fingerprint image. Minutiae detecting procedure using Union and Division takes, on the average, 32% of the consuming time taken by a minutiae detecting procedure without using Union and Division.