• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6052-6059
• /
• 2012

본 논문에서는 전산실 파워라인의 고조파 문제를 다룬다. 전산실 UPS의 부하 측 각 상의 전압 및 전류는 한국전력공사 전기공급 약관의 규제치 전압 왜형률 5%와 전류 왜형률 5%, 그리고 KS C 4310 의 무정전 전원장치인 UPS의 출력측 고조파 전류 한도 5% 이하를 만족시켜야 한다. 그러나 측정 결과 전압 왜형률은 0.86%로 한국전력공사 규제치에 부합하나, 전류 왜형률은 34.98%로 한국전력공사 규제치인 5%를 초과하여 부적합하였다. 이에 대한 대책으로 AC필터를 설치한 결과 전류 왜형률이 15.22%로, 기준 값 이내에는 미치지 못하였으나 본래의 34.98%에서 절반에 가까운 수준에는 근접 하는 효과가 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.528-532
• /
• 2004

Novel single-stage power factor correction AC/DC converter with low DC link voltage using new magnetic feedback technique is proposed in this paper. The Proposed converter has high power factor, tight output voltage regulation and low link capacitor voltage less than 450V for all the load range through the universal input line. This converter has also no dead-zone in the input current, which is seen in the conventional converter using the previous magnetic feedback technique. In this paper, the analysis of operations and features of the proposed converter is provided, and the experimental results of 90W-prototype shows the low harmonic distortions satisfied with EN 61000-3-2 Class D, high power factor and low link voltage less than 450V.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.187-188
• /
• 2007

This paper describes a simple and high-performance LDO regulator designed using a $0.18{\mu}m$ CMOS process. It is designed to provide a regulated voltage for on-chip small loads instead of for off-chip heavy loads. Since the load capacitance is very small in this applications, the frequency compensation can be easily achieved without a buffer. The designed LDO drives a load current up to 15mA and dissipates only 12uA quiescent current. The line regulation is and the load regulation is for a 9mA load step. The PSRR at 10kHz is 54dB.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.391-400
• /
• 2008

Multi-pulse topology of converters using elementary six-pulse GTO - VSC (gate turn off based voltage source converter) operated under fundamental frequency switching (FFS) control is widely adopted in high power rating static synchronous compensators (STATCOM). Practically, a 48-pulse ($6{\times}8$ pulse) configuration is used with the phase angle control algorithm employing proportional and integral (PI) control methodology. These kinds of controllers, for example the ${\pm}80MVAR$ compensator at Inuyama switching station, KEPCO, Japan, employs two stages of magnetics viz. intermediate transformers (as many as VSCs) and a main coupling transformer to minimize harmonics distortion in the line and to achieve a desired operational efficiency. The magnetic circuit needs altogether nine transformers of which eight are phase shifting transformers (PST) used in the intermediate stage, each rating equal to or more than one eighth of the compensator rating, and the other one is the main coupling transformer having a power rating equal to that of the compensator. In this paper, a two-level 48-pulse ${\pm}100MVAR$ STATCOM is proposed where eight, six-pulse GTO-VSC are employed and magnetics is simplified to single-stage using four transformers of which three are PSTs and the other is a normal transformer. Thus, it reduces the magnetics to half of the value needed in the commercially available compensator. By adopting the simple PI-controllers, the model is simulated in a MATLAB environment by SimPowerSystems toolbox for voltage regulation in the transmission system. The simulation results show that the THD levels in line voltage and current are well below the limiting values specified in the IEEE Std 519-1992 for harmonic control in electrical power systems. The controller performance is observed reasonably well during capacitive and inductive modes of operation.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.784-793
• /
• 2019

Two objectives can be pursued simultaneously with the ${\delta}$ control of a single-phase electric spring (ES). These objectives are the stabilization of the voltage across the critical load (CL) of a power system, and the achievement of a specific functionality similar to the pure compensation of reactive power or the correction of the power factor. However, existing control systems implementing the ${\delta}$ control do not cope with non-ideal operating conditions, such as line voltage distortions, and exhibit a somewhat sluggish regulation of the CL voltage. In an effort to improve both the steady-state and transient performances of an ES power system, this paper proposes implementing the ${\delta}$ control by means of a control system built up on the repetitive control and assisted by state feedback with pole assignment. This paper starts by analyzing the dynamics of an ES power system in terms of its poles and zeros. After that, a reduced second-order model of the dynamics is formulated to avoid a notch filter in the pole assignment. A repetitive control for an ES power system is then designed to meet the two above mentioned objectives. Experimental tests carried out on a laboratory setup demonstrate the effectiveness of the proposed control system in significantly improving the ES power system performance, while reaching the two objectives. In particular, the tests outline the large mitigation of harmonics in the CL voltage under line voltage distortions and its fast stabilization action.

• 전자공학회논문지
• /
• 제50권10호
• /
• pp.239-244
• /
• 2013

본 논문에서는 고속 PMIC(Power Management Integrated Circuit) 회로를 위한 저전압 입력 보호기능을 가지는 UVLO(Under Voltage Lock Out) 기능이 탑재된 LDO(Low Drop-Out) 레귤레이터를 설계하였다. 설계된 LDO 레귤레이터는 밴드갭 기준전압 회로, 오차 증폭회로, 파워 트랜지스터 등으로 이루어지진다. LDO 레귤레이터는 5 V 전원전압으로부터 3.3 V 출력을 갖도록 설계되었으며, 저전압 입력보호 기능을 하는 UVLO 회로는 전원부와 파워 트랜지스터 사이에 삽입된다. 또한 UVLO는 5 V 구동전압에서, 하강 시 2.7 V 에서 LDO 레귤레이터 동작을 멈추게 하고, 구동전압 상승 시 4.0 V 에서 LDO 레귤레이터가 정상 동작한다. $1{\mu}m$ 20 V 고전압 CMOS 공정을 사용하여 모의실험 한 결과, 설계한 LDO 레귤레이터는 5.88 mV/V의 라인레귤레이션을 가지고, 부하전류가 0 mA에서 200 mA로 변할 때 27.5 uV/mA의 로드레귤레이션을 보였다.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.63-69
• /
• 2017

본 논문은 드론의 체공시간 증대를 위해 고효율 전력관리 회로 및 시스템을 제안한다. 종래의 드론은 다수개의 직렬 배터리와 낮은 효율의 선형 레귤레이터 사용으로 무겁고 발열이 크며 이로 인한 전력누수 문제가 있었다. 본 논문에서는 3.7V 단일 Li-Po 배터리 셀을 사용할 수 있는 스위칭 방식의 승압형 DC-DC 전력변환 회로에 대한 연구를 다룬다. 본 연구를 통해 시제품 개발 결과 3.7V 입력, 5V 출력의 step-up regulation을 실현하였다. 또한 종래 선형 레귤레이터의 50% 수준이었던 전력효율 대비 최대 91.3% 효율과 $50^{\circ}C$ 이하의 표면온도를 달성하였으며, 0.02V/V 및 0.15V/A의 line/load regulation 성능을 측정으로 검증하였다. 본 연구결과를 통해 3.7V 단일 셀 배터리 사용으로 충방전을 위한 별도의 cell-balancing 회로가 필요하지 않게 되며, 높은 전력관리 효율로 드론의 체공시간을 획기적으로 개선시킬 수 있는 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.505-508
• /
• 1994

This paper describes an implementation of a single phase PWM ac/dc converter whose control scheme can be directly applied to the rectification of ac traction system. Power circuit using self-commutated switching devices(GTO) provides input power factor correction with dc voltage regulation. Effective compensation of load variations and line disturbance can be accomplished by real time instantaneous control of ac input current and dc link voltage using 32 bit floating point DSP. Parallel operation of two converters reduces the input line current ripple. Experimental results of the two parallel converter system are shown in the 20KW range for the verification of the system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권8호
• /
• pp.392-401
• /
• 2001

This paper presents the single-stage high power factor AC to DC converter operated in active-clamp mode. The proposed converter is added active-clamping circuit to boost-flyback single-stage power factor corrected power supply. The active-clamping circuit limits voltage spikes, recycles the energy trapped in the leakage inductance, and provides a mechanism for achieving soft switching of the electronic switches to reduce the switching loss. The auxiliary switch of active-clamping circuit uses the same control and driver circuit as the main switch to reduce the additional cost and size. To verify the performance of the proposed converter, a 100W converter has been designed. The proposed converter gives good power factor correction, low line current harmonic distortions, and tight output voltage regulation, as used unity power factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2641-2643
• /
• 1999

This paper describes the first field demonstration of the distribution STATCON in Korea including installation and its evaluation for improving power quality in distribution system. The purpose of installation is to verify functionally the voltage source inverter based equipment for voltage regulation and harmonic mitigation in distribution line. The operational data resulting from field test and the site figure are included.