• Plant Biotechnology Reports
• /
• v.4 no.3
• /
• pp.185-192
• /
• 2010

The Arabidopsis ${\omega}$-3 fatty acid desaturase (AtFAD7) catalyzes the synthesis of trienoic fatty acids (TA). A transgenic tobacco line, T15, was produced by a sense AtFAD7 construct and showed a cosuppression-like phenotype, namely extremely low TA levels. The sequence similarity between AtFAD7 and a tobacco ortholog gene, NtFAD7, was moderate (about 69%) in the coding sequences. AtFAD7 siRNAs accumulated at a high level, and both AtFAD7 and NtFAD7 mRNAs are degraded in T15 plants. The low-TA phenotype in T15 was dependent on a tobacco RNA-dependent RNA polymerase6 (NtRDR6). We also produced tobacco RNAi plants targeting AtFAD7 gene sequences. The AtFAD7 siRNA level was trace, which was associated with a slight reduction in leaf TA level. Unexpectedly, this RNAi plant showed an increased NtFAD7 transcript level. To investigate the effect of translational inhibition on stability of the NtFAD7 mRNAs, leaves of the wild-type tobacco plants were treated with a translational inhibitor, cycloheximide. The level of NtFAD7 mRNAs significantly increased after cycloheximde treatment. These results suggest that the translational inhibition by low levels of AtFAD7 siRNAs or by cycloheximide increased stability of NtFAD7 mRNA. The degree of silencing by an RNAi construct targeting the AtFAD7 gene was increased by co-existence of the AtFAD7 transgene, where NtRDR6-dependent amplification of siRNAs occurred. These results indicate that NtRDR6 can emphasize silencing effects in both cosuppression and RNAi.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.359-371
• /
• 1998

We present the design specifications and the performance estimation of the FUVS (Far Ultraviolet Spectrograph) proposed for the observations of aurora, day/night airglow and astronomical objects on small satelltes in the spectral range of $900~1750AA$. The design of FUVS is carried out with the full consideration of optical characteristics of the grating and the aspheric substrate. Two independent methods, ray-tracing and the wave front aberration theory, are employed to estimate the performance of the optical design and it is verified that both procedures yield the resolution of $2~5AA$ in the entire spectral range. MDF (Minimum Detectable Flux) is also estimated using the known characteristics of the reflecting material and MCP, to study the feasibility of detection for faint emission lines from the hot interstellar plasmas. The results give that the observations from 1 day to 1 week, depending on the line intensity, can detect such faint emission lines from diffuse interstellar plasmas.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.67-75
• /
• 2014

Architecture is not only coming out of the making of a building room but also contributing to the making of an urban room. "The inside is not a contradiction of the outside...architecturally opened". (De Carli, 1967) The urban room is felt as a sense of rapport between building and city because architecture makes the building room closed simultaneously open toward the city. Architecture exists between both rooms. There is the possibility of integrating, by the conception of interior, architecture and urbanism and thus, the possibility of giving a theoretical ground to Interior Architecture/Design; "all architecture is interior architecture". (Ottolini, 1996) It is in line with the idea of the "Fusing: Landscape/Urbanism/Architecture". (Holl, 2009) The paper deals with, through literature review, a possibility of the fusing: Interior/Architecture/Landscape/Urbanism. The first site explores the meaning of the urban place as a thing, which gives a possibility of combining the building interior and the urban interior. The second site illustrates the idea of the urban interior for dwelling. The urban interior is definitely a place of dwelling to keep human inhabitancy, which takes place in a united interior of the building interior and the urban interior. The third site clarifies the idea of the urban interior. While the building interior gives human being with the private stage, the urban interior provides him with the public stage of city life. The two different interiors constitute an interior world for his trajectory of dwelling. The last site traces the conceptual development of the urban interior. The trace comes to a conclusion that architecture, landscape, and urbanism can be unified by the conception of interior and the urban interior is an object of "Interior Architecture/Design". This paper is theorized as a twofold singular of the building interior and the urban interior. Ultimately, it is relevant to the theoretical principle of fusing interior/architecture/landscape/urbanism, and aims at offering a departing point to consider the urban interior as an object of "Interior Architecture/Design" and for the future studies of the urban interior.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.27-29
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.324-336
• /
• 2000

The paper proposes an efficient buffer management scheme to enhance performance of the disk I/O system. Without any user level information, the proposed scheme automatically detects the block reference patterns of applications by associating block attributes with forward distance of a block. Based on the detected patterns, the scheme applies an appropriate replacement policy to each application. We also present a new block allocation scheme to improve the performance of buffer cache when kernel needs to allocate a cache block due to a cache miss. The allocation scheme analyzes the cache hit ratio of each application based on block reference patterns and allocates a cache block to maximize cache hit ratios of system. These all procedures are performed on-line, as well as automatically at system level. We evaluate the scheme by trace-driven simulation. Experimental results show that our scheme leads to significant improvements in hit ratios of cache blocks compared to the traditional schemes and requires low overhead.

• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.39-51
• /
• 2011

Objectives: This study was designed to evaluate exposure levels of various chemicals used in wafer fabrication product lines in the semiconductor industry where work-related leukemia has occurred. Methods: The research focused on 9 representative wafer fabrication bays among a total of 25 bays in a semiconductor product line. We monitored the chemical substances categorized as human carcinogens with respect to leukemia as well as harmful chemicals used in the bays and substances with hematologic and reproductive toxicities to evaluate the overall health effect for semiconductor industry workers. With respect to monitoring, active and passive sampling techniques were introduced. Eight-hour long-term and 15-minute short-term sampling was conducted for the area as well as on personal samples. Results: The results of the measurements for each substance showed that benzene, toluene, xylene, n-butyl acetate, 2-methoxy-ethanol, 2-heptanone, ethylene glycol, sulfuric acid, and phosphoric acid were non-detectable (ND) in all samples. Arsine was either "ND" or it existed only in trace form in the bay air. The maximum exposure concentration of fluorides was approximately 0.17% of the Korea occupational exposure limits, with hydrofluoric acid at about 0.2%, hydrochloric acid 0.06%, nitric acid 0.05%, isopropyl alcohol 0.4%, and phosphine at about 2%. The maximum exposure concentration of propylene glycol monomethyl ether acetate (PGMEA) was 0.0870 ppm, representing only 0.1% or less than the American Industrial Hygiene Association recommended standard (100 ppm). Conclusion: Benzene, a known human carcinogen for leukemia, and arsine, a hematologic toxin, were not detected in wafer fabrication sites in this study. Among reproductive toxic substances, n-butyl acetate was not detected, but fluorides and PGMEA existed in small amounts in the air. This investigation was focused on the air-borne chemical concentrations only in regular working conditions. Unconditional exposures during spills and/or maintenance tasks and by-product chemicals were not included. Supplementary studies might be required.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2006

In this paper, adaptive Facial Emotional Recognition system based on Gabor Wavelet Neural Network, considering six feature Points in face image to extract specific features of facial expression, is proposed. Levenberg-Marquardt-based training methodology is used to formulate initial network, including feature extraction stage. Therefore, heuristics in determining feature extraction process can be excluded. Moreover, to make an adaptive network for new user, Q-learning which has enhanced reward function and unsupervised fuzzy neural network model are used. Q-learning enables the system to ge optimal Gabor filters' sets which are capable of obtaining separable features, and Fuzzy Neural Network enables it to adapt to the user's change. Therefore, proposed system has a good on-line adaptation capability, meaning that it can trace the change of user's face continuously.

• The KIPS Transactions:PartB
• /
• v.14B no.2
• /
• pp.81-88
• /
• 2007

We implement automobile license plates recognition system. These days automobile license plate recognition systems are widely used for tracing stolen cars. managing parking facilities, ticketing speeding cars, and so on. Recognition systems largely consist of three parts plates extraction, segments extraction, and segment recognition. For plates extraction, we measure the degree of inclination of plate. We use filters that extract only the horizontal components of the front of an automobile to measure the degree of inclination. For segment extraction, we trace the change of the number of blocks that consist solely of foreground pixels or background pixels as the horizontal scanning line moves along upward. For recognition of each individual letter or digit, we devise a variant of template matching method, called comparative template matching. Through experiments, we show that comparative template matching is less prone misled by noises and exhibits higher performance compared to the traditional method of template matching or histogram based recognition.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.591-597
• /
• 1996

To straighten the path that farm machinery follows in paddy fields, it is necessary to measure and evaluate the tracks that these machines leave behind. However, there are no known methods for making such measurements and evaluations since it is difficult to accurately trace the paths that the machine make in paddy fields. Therefore, a measuring system has been developed which can accurately recored the path of a farm machinery in a field by measuring the horizontal straight-line distance from the side of the field to the machine. This system consists of a track subsystem on the machine and a range finder system. A measuring appraratus is installed on a flatcar which runs on rails over 50 m long at the side of the filed. The track subsystem uses a CCD camera to track the movement of the machine in the field which is following a lengthwise path. The range finder subsystem measures the distance that the measuring apparatus has traveled on the rails and the distance from the app ratus to the machine in the field. This system makes it possible to record the path that the machine travels. Even though differences in traveling distance arise between the measuring apparatus and the farm machine, these differences are detected by image processing , which allows the machine in the field to be located accurately. The short(0.05 second) time required for image processing is enough to follow an object . In the present study, this system was able to measure the path that a moving tractor makes. Even though a lag of up to 0.4 meters occurred, this system did not miss its target during operation of the track subsystem. Thus the path measuring system developed here is able to record vehicle paths automatically by following the movement of vehicles in the field and measuring the distance to them. It is expected to come into use in such applications as unmanned moving vehicle tests.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04a
• /
• pp.55-62
• /
• 1997

In Japan, the membrane filtration is becoming a common technology for municipal water supply system especially for small plant. 6 years before (1991), the national research project of membrane filtration for small plant has started. The project was named as "MAC 21", MEMBRANE AQUA CENTURY 21. In the project the Ministry of Health and Welfare, 8 universities and 18 water treatment plant companies have been involved. This was the first attempt to research a common theme in joint with government, universities and private companies. After three years, the guide line for membrane filtration application for small plant has been established. This has promoted to install some actual plant. And also, another joint research for "RESEARCH OF MEMBRANE FILTRATION FOR ADVANCED WATER TREATMENT" has started in 1994 and completed in March, 1997. The project was named as MAC21. In the former project the main objectives were removal of turbidity and bacteria from water. However, in new project the objective was establishment of the further advanced membrane filtration technology which would be applicable for trace chemical components removal such as tri-halo-methane pre-courser, agricultural chemicals removal, offensive smell and taste removal and virus removal. For the objectives, application of nanofiltration and hybrid-system, a combination of micro-filtration ultra-filtration with biological, ozone and activated carbon treatment process have been studied. In addition, application of membrane filtration for treatment of back-wash waste water originated from membrane filters and conventional sand filters has.been studied. At the end of March of this year, about 30 membrane filtration plants are actually supplying the water, the total treatment capacity is about 6,000 m$^{3}$/day and another 20 will be installed within one year.led within one year.