• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.173-185
• /
• 2004

The production using U-shaped line is studied. This research presents the relationship among machining time, cycle time and production rate in a U-shaped line. The U-shaped line produces shafts by automated machines. In this paper when any production rate is given the U-shaped line always satisfies the production rate. An algorithm is developed for the determination of cycle time, the number of machines and workers of the U-shaped line in order to minimize the total machine capacity and the number of workers for any given production rate. The U-shaped line was successfully designed by applying the proposed algorithm.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.51-58
• /
• 2012

As a basic study to improve hooking ability of long line fishing gear, which is widely used around Jeju-do coast, the researcher performed hooking experiment of parrot fish by manufacturing and installing 7 kinds of model long line fishing gears, whose thickness of branch line are different and 8 kinds of model long line fishing gear, whose length of branch line are different, in indoor circular aquarium, which is installed for the model experiment of thickness and length of branch line that are various by fishing implement and improper. The hooking rate depending on thickness and length of branch line was calculated and the effect of thickness and length of branch line on hooking rate was analyzed. Its results are as follows. When branch line was thin and long, high hooking rate appeared. In the scope of value setting, the relationship between thickness ($B_t$) of branch line and total hooking rate ($Th_r$) can be shown as following formula as. In the scope of value setting, the relationship between length ($B_t$) of branch line and total hooking rate ($B_t$) can be shown as $Th_r=-20.83B_t+26.04$. Through Pearson correlation analysis, the coefficient of correlation between thickness of branch line and hooking rate was -0.718. Therefore it showed significance in 0.01 significance level. Through Pearson correlation analysis, the coefficient of correlation between length of branch line and hooking rate was 0.431. Therefore it showed significance in 0.01 significance level.

• 한국환경과학회지
• /
• 제10권6호
• /
• pp.407-415
• /
• 2001

A case of air pollution study of estimation of emission rate for source to railroad rolling stock and emissive character about is unusual. Recent emission rate of railroad rolling stock was estimated with emission factor of EPA in three region(Seoul, Incheon, and Gyeonggido). But this EPA factor could be incorrect because Korea and America have a different railroad environment in the variety of fuel and character of railroad rolling stock In this study, emission rate of each line, car and region(district) with omission factor of Korean case(National Railroad Administration, 1997) was estimated. In Busan Metropolitan City, railroad rolling stocks were divided accoding to, each line, car and service. Particularly, the Idle fuel rate omitted in the preceding study was included in calculation fuel rate. Total emission rate of Busan Metropolitan City was 887.41 t/year Each emission rates of Kyeongbu line, Donghaenambu line, Gaya line, Uam line, Bujeon line, and idle was 489.15t, 196.46t, 33.94t, 12.66t, 6.47t, and 48.75t, respectively.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권5호
• /
• pp.310-318
• /
• 2016

Emerging technologies such as the Internet of Things (IoT) and the Advanced Driver Assistant System (ADAS) often have image transmission functions with tough constraints, like low power and/or low delay, which require that they adopt line-based, low memory compression methods instead of existing frame-based image compression standards. Bit rate control in the conventional frame-based compression systems requires a lot of hardware resources when the scope of handled data falls at the frame level. On the other hand, attempts to reduce the heavy hardware resource requirement by focusing on line-level processing yield uneven image quality through the frame. In this paper, we propose a bit rate control that maintains consistency in image quality through the frame and improves the legibility of text regions. To find the line characteristics, the proposed bit rate control tests each line for ease of compression and the existence of text. Experiments on the proposed bit rate control show peak signal-to-noise ratios (PSNRs) similar to those of conventional bit rate controls, but with the use of significantly fewer hardware resources.

• 한국미생물·생명공학회지
• /
• 제17권3호
• /
• pp.241-246
• /
• 1989

Quadrupole mass spectrometer를 이용한 발효 배기가스의 분석을 통해 세포의 증식을 on-line monitoring하고자 model 균주로 Candida utilis에 대해 연구하였다. Quadrupole mass spectrometer와 interface된 16-bit 개인용 컴퓨터 (IBM PC-AT)에서 산소 소비속도(OUR)와 이산화탄소 발생속도(CER)를 on-line 계산할 수 있었고 계속해서 이들 계산치로부터 세포농도와 증식속도 및 비증식속도를 계산하였다. 계산된 값들은 실험적으로 측정한 세포농도 및 비증식속도와 잘 일치함을 알 수 있었다.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.1-5
• /
• 2012

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.115-119
• /
• 2008

Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but mechanical property. In this study, ABS and PP were used as experimental materials. And weld line length, depth and strength have been examined according to the injection molding conditions. As the results of experimental studies, weld line length increased as flow rate increases for all materials. And the flow rate is most influenced to the creation of weld line length. Also weld line strength increased, as flow rate and melt temperature increase for all materials. The whole experiment results was similar to CAE analysis results.

• Journal of Nutrition and Health
• /
• 제31권8호
• /
• pp.1347-1354
• /
• 1998

The purposes of this study were to : (a) anlayze wating time, service rate, arrival rate, and coustomer expectations/satisfaction in cafeteria business foodservices and (b) identify the differences in those factors between foodservices by menu managmenet systems. The samples were two business foodservices operated by contract management in Seoul. The queue, laptime , service rate, and arrival rate were measured at each foodservice by stopwatch observation. The menu type, delivery system, number of meals served , servide time, and turnover rate of each foodservic was investigated. Questionnaires were developed to survey customer expectations and satisfaction. Satistical data analysis was completed using the SAS package programs for descriptive analysis and t-test. The mean waiting time of island type dafeteria system with separte set -menu was shorter than that of the other. In both foodservices, arrival rates were not significantly different from one another , but sevice rates were significnatly high in dafeteria menu systems. The peak time of the queue was found out at combination set menu line. The separate set menu line had a higher servide rate than the combination set menu line. The mean waiting time of the island type cafeteria line was shorter than that of the straifth type . At the straight type dafeterial line, both arrival rate and service rate were higher than those of island-type. The results of this study suggested that a separate set-menu would be more desirable than a combination set-menu in case of providing set menu with cafeteria menu.

• 대한의생명과학회지
• /
• 제25권1호
• /
• pp.32-39
• /
• 2019

Conventional high-flux hemodialysis (HD) is not as good as normal kidney function. Morbidity and mortality rates of patients receiving HD are still very high. To increase mid-to-large molecule clearance by combining diffusion and convection, on-line hemodiafiltration (HDF) is required. The objective of this study was to compare long-term survival rate of patients treated with on-line HDF to those who received conventional high-flux HD by reviewing data from Chonnam National University Hospital (CNUH). We selected patients who attended the 'CUNH dialysis center' and agreed to participate in the study. Overall, 40 patients with ESRD switched from high flux HD to on-line HDF or started on-line HDF from August 2007 to December 2009. Additionally, a total of 42 patients receiving conventional high-flux HD during the same period were enrolled. We then reviewed long-term survival rate of patients receiving on-line HDF over the next seven years. When we compared survival rates for seven years, the survival rate of the group receiving on-line HDF was 65% (26/40) while that of the group receiving the conventional high-flux HD was 54.8% (23/42). Although the number of patients was small to see survival difference clearly by one specific dialysis modality, there was somewhat difference in survival rate between the two groups. Indicators such as anemia, calcium-phosphate metabolism, nutritional status, treatment adequacy, and hospitalization were also improved in the group receiving HDF. Overall, results of our study showed beneficial effects of on-line HDF on clinical outcomes and survival in chronic HD patients.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.204-209
• /
• 2003

The line-of-sight stabilization system is an equipment which is loaded on a vehicle and stabilizes the direction of the line-of-sight of the vision sensor to obtain a not-swayed image in the existence of external disturbances. To obtain accurate Euler angles and angular velocities simultaneously we usually need a control system which uses high-price inertial sensors including Vertical Gyro(VG) or Rate Integrating Gyro(RIG). In this paper, we design and implement a control system of a gimbal, which is a line-of-sight stabilization system using a low-cost mixed algorithm of a rate gyro and an accelerometer instead of a VG and a RIG. In the experiment where we laid the implemented line-of-sight stabilization system on the rate table. we can see the stabilized performance to external disturbances.