• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.269-270
• /
• 2015

We carried out near-IR photometric and optical spectroscopic observations of V582 Aur, which is a FU Orionis type object, to investigate any periodic and/or aperiodic variations. We obtained light curves on the scale of a night and a year, in J, H and Ks bands with KASINICS (KASI Near Infrared Camera System) attached to the BOAO (Bohyun-san Optical Astronomy Observatory) 1.8-m reflector in Youngcheon, South Korea and examined photometric variations on the two time scales. So far we have not found any periodic brightness variations on the scale of a night. On the other hand, we have found that there seems to be a periodic brightness variation with a period of approximately 45 days. In addition, high-resolution optical spectroscopic observations of V582 Aur were performed from February 2013 to May 2014 with the high-resolution echelle spectrograph BOES attached to the BOAO 1.8-m reflector. We analyzed several spectral lines to understand the physical state of V582 Aur. The P Cyg profiles are clearly shown in the $H{\alpha}$ line and Na I D line.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.521-531
• /
• 2018

This paper presents a procedure for field measurements which provides a generalized Narrowband Power Line Communications (NB-PLC) channel model for low voltage (LV) access network in order to deploy advanced metering infrastructure (AMI) within Lahore, Pakistan. The measurements of allocated sites were performed in the residential (urban and rural), industrial and commercial electricity consumers for the NB-PLC channel modeling of overhead transmission lines (TLs). On the basis of extensive field measurement results, the average attenuation profile and transfer functions are presented. The results obtained from field measurements are validated by comparing them with a proposed Simulink model. A close agreement in the measured and simulated transfer function (TF) results is observed. The proposed Simulink model is an effort to model the NB-PLC channels in an effective way, especially in South Asian countries.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.251-265
• /
• 2013

The emergence of social network services, is changing the foundation of human relationship formation and method of communication of individuals through sharing of free information. Social network service is a service to support or facilitate an on-line extension of off-line network among people by helping them to share personal profile. History of social network services very short. But users of the various layers is increasing rapidly and ripple effect social as a result is very large. The focus of existing research was mainly devoted to motivation of use and acceptance of social network services. Currently the use of SNS was maturing. Thus, in-depth research on the use pattern of SNS users is needed. The purpose of this study is that, for Facebook in social network services, to analyze the changes in the initial stage of use, medium-term, usage patterns at the current time. Results of the study by analyzing the characteristics of the change in the pattern of usage of user of Facebook, it can be used as basic materials for SNS researchers and service provider.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.612-615
• /
• 2003

In this paper, a design of radiation detector for gamma column scanner is introduced. Distillation column is important unit in Petro-chemical industries, and its on-line diagnose is very important. To get density profile measured by the radiation transmitted through column is well method for on-line diagnose as gamma scanning. For this purpose radiation detection circuit, radiation source and mechanical system for moving source and detector are required. Conventional radiation detection circuit for this application is sensitive to electric noise because of interface between the radiation circuit and the controller for mechanical system. The radiation detection system introduced here is using loop coil instead of slip ring to remove contact noise. Radiation detection system designed here for gamma scanning consist of BGO detector, high voltage circuit, PHA circuit and FSK modem. The BGO detector is used as radiation sensor, high voltage circuit and peak height analysis circuit is essential to process the signal generated from BGO detector. Micro controller convert measured data into ASCII data. FSK modem transmit ASCII data. Transmitted ASCH data is picked up in antenna coil and processed for combined function with mechanical system. This method gives good result by isolating the controlling circuit of mechanical system from radiation detecting circuit which is sensitive to noise.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.440-448
• /
• 2003

Sheet or plate bending is one of the most important industrial metal forming processes. Considerable attention has been focused on gaining a better understanding of bending characteristics. One of defaults in bending process is the springback. In this study, the springback characteristics of tailor-welded strips in U-bending process was investigated. Furthermore, effect of the process variables such as the geometry of the tools, thickness combination of workpiece, and welding prcoessing on springback were experimentally clarified. First, tailor-welded strips are joined by the laser welding process and consisted of two types of thickness combinations of the SCPl sheet, $0.8t{\times}1.2t$ and $0.8t{\times}1.6t$ to investigate the effect of different thickness combination on the springback. Secondly, two different directionly welded strips, one was welded along the centerline of the strip-width and the other was along the centerline of strip-length, were adopted to compare the effects of the location of weld line on the springback. Some cases of the experimental results were compared to the results simulated by using a commercial FEM code, PAM-STAMP and the theoretical results using the springback formula as well.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.175-180
• /
• 2019

The optical characteristics and power transfers between guiding channels of blazed grating-assisted directional coupler (B-GADC) are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. To evaluate the coupling efficiency of B-GADC, the dispersion curves as a function of the grating period and wavelength are analyzed numerically for quasi-TE and quasi-TM modes. Furthermore, symmetric, sawtooth and asymmetric grating profiles are considered to know the effect of blazing characteristics on power transfer of GADC. The numerical results show that the grating period for minimum-gap condition to obtain maximum power transfer decreases gradually as the blazed structure changes from symmetric to asymmetric profile. On the other hand, the coupling length increases reversely.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.3
• /
• pp.137-147
• /
• 2024

Green hydrogen presents a sustainable and environmentally friendly solution for clean energy production and transportation. This study aims to identify the optimal profile of green hydrogen transportation risers originating from a floating offshore wind turbine (FOWT) integrated with a hydrogen production facility. Employing the Cummins equation, a fully coupled dynamic analysis for FOWT with a flexible riser was conducted, with the tower, mooring lines, and risers described using a lumped mass line model. Initially, motion response amplitude operators (RAOs) were compared with openly published results to validate the numerical model for the FOWT. Subsequently, a parametric study was conducted on the length of the buoyancy module section and the upper bare section of the riser by comparing the riser's tension and bending moment. The results indicated that as the length of the buoyancy module increases, the maximum tension of the riser decreases, while it increases with the lengthening of the bare section. Furthermore, shorter buoyancy modules are expected to experience less fatigue damage, with the length of the bare section having a relatively minor impact on this phenomenon. Consequently, to ensure safety under extreme environmental conditions, both the upper bare section and the buoyancy module section should be relatively short.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.155-160
• /
• 2024

The polarization-selective beam splitter grating can be widely used in numerous optical information processing systems. In this paper, to design a high-efficiency plasma polarization beam splitter (PBS), the structure composed of an Ag metal layer in Littrow mounting is implemented. To achieve high diffraction efficiency in the transmitted 0th-order TE polarization and the reflected 0th-order TM polarization, the grating depth and grating ratio of presented PBS is optimized by using rigorous Modal Transmission-Line Theory. From the optimized results, PBS has advantages of wide band properties for incident wavelength and angle, and the efficiency is higher than 95% for both TE and TM polarization. Therefore, this highly efficient PBS wideband grating with high extinction ratio can be used as an excellent optical diffraction device.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.219-229
• /
• 1998

The purpose of this study is to define the characteristics of the skeleton and soft tissues of severe adult class III malocclusion. The materials selected for this study were lateral cephalograms of 112 adult class III malocclusion patients with ANB difference below -2 degrees. and the mean age was 22.9 years old. The normal control sampler consisted of lateral cephalograms of 50 adults in normal occlusion and the mean age was 22.1 years old. The Horizontal reference line was FH line and the vertical reference line was nasion perpendicular to FH line. The skeletal and soft tissue characteristics of Class III malocclusion are as follows : 1. In the skeletal profile evaluated by vertical reference line (Nasion perpendicular to FH), the forehead and maxilla was similar to normal, but the mandible was protruded significantly. 2. The soft tissue profile is concave. The thickness of soft tissue covering forehead area and nose is within normal range. but the upper lip is thicker and the nasolabial angle is smaller than normal. The lower lip and inferior labial sulcus is thinner than normal. The degree of eversion of lower lip is lesser than normal. 3. The cranial base of class III malocclusion is shorter and saddle angle is smaller than normal. 4. The location of midface evaluated in relations to cranial base is within normal range but, the length of midface is shorter than normal when compared from the deep portion of the facial skeleton. 5. The location of maxilla in reference to cranial base is within normal range but the length of maxilla was shorter in class III malocclusion. 6. The mandible was protruded, ramus height and body length, gonial angle were greater than normal, and the chin angle was smaller. 7. Upper incisor was proclined, lower incisor was retroclined.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.285-301
• /
• 1999

There is a need for more accurate prediction in surgical orthodontic treatment. Video imaging is an important technology in planning orthognathic surgery and educating patients about the esthetic results after treatment. Preoperative and postoperative lateral cephalogram of 30 patients who had one piece Le Fort I osteotomy advancement and mandibular set back by bilateral intraoral vertical ramal osteotomy with or without genioplasty were used in this study. The computer generated soft tissue line drawing prediction were compared with the actual postoperative cephalograms .The results are as follows. 1. 14 variables showed Statistically significant differences from 24 variables between computer predicted profile and post operative profile 2. Most of the differences were found in the maxilla-related soft tissue landmarks. 3. The predicted results were more accurate in the groups who had small amount of mandibular set back. 4. The predicted results were more accurate in the groups who had no genioplasty. Most of these differences were within 2mm ranges. Therefore profile change prediction by video imaging could be considered clinically acceptable.