• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.37-47
• /
• 2006

The road sign is one of street furnitures functioning to guide directions for drivers. The road sign should be employed and designed to help drivers find their destinations easily and accurately. It is obvious that the road sign is one of the main components that enhance efficiency and safety of driving environments. The current way of guiding strategy at road signs in Korea is a system for mainly guiding 'points' although a new system guiding 'road names' and 'street numbers' with the introduction of new address system is now being introduced on urban areas. When the regional territory management offices and local governments try to employ current road sign systems, they are supposed to follow the sign regulations which contains standard project processes, selection methods of guiding points, character size and design, and location selection for each road sign. However, the current road sign regulations are very complex to understand and unclear for a person in charge to do tasks described above. Especially, selection process and criteria of guiding points are cumbersome and controversial. Furthermore, non sufficient ways of selecting guiding points considering road functions and geographic characteristics decrease the connectivity of guiding points. This study develops enhanced ways of increasing connectivity of successive guiding points through three case studies. Developed ways will help highway agencies and officials understand how to improve the connectivity of road signs.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.49-58
• /
• 2015

PURPOSES : The use of environmentally friendly construction methods has been recently encouraged to reduce fuel consumption and the effects of global warming. For this purpose, the roller compacted concrete pavement (RCCP) construction method has been developed. RCCP is more environmentally friendly and economically efficient than general concrete by reducing the amount of CO2 generated through the application of a smaller amount of cement. RCCP has a number of advantages such as an easy construction method, low cost, high structural hydration performance, and aggregate interlocking. However, mix design standards and construction guidelines of RCCP are required for domestic application. In addition, a study on aggregate selection, which has an effect on the characteristics of RCCP, is necessary owing to a limited number of researches. Thus, the aggregate effect on the performance of RCCP in securing the required strength and workability was evaluated in consideration of domestic construction. METHODS : Sand and coarse aggregates of both 19mm and 13mm in maximum size were used in this study. Four types of aggregate gradations (s/a = 30%, 58%, and 70% for the sand and coarse aggregate of 19mm in maximum size, and s/a = 50% for a combination of the three types of aggregates) were set up to investigate the effects of the PCA band on the RCC characteristics. The conditions of s/a = 30% and 70% were evaluated to check the gradation effect outside of the recommended band. The conditions of s/a = 58% and 50% were used because they are the optimum combination of the two and three types of aggregates, respectively. RCCP gradation band was suggested gradation with a proper construction method of RCCP by synthetically comparing and analyzing the correlation of optimum water content, maximum dry density, and strength of requirements through its consistency and compaction test. RESULTS : The lower and upper limit lines are insufficient to secure a relatively strong development and workability compared to an aggregate gradation in the RCCP gradation band region. On the other hand, the line in the RCCP gradation band and the 0.45 power curve in the RCCP gradation band region were satisfactory, ensuring the required strength and workability. CONCLUSIONS : The suitable aggregate gradation on RCCP process should meet the RCCP gradation band area; however, fine particles passing through a #60 sieve do not need to be within the recommended gradation band because the influence of this region on such fine particles is small.

• Journal of Elementary Mathematics Education in Korea
• /
• v.12 no.2
• /
• pp.149-163
• /
• 2008

The purpose of this study was to investigate research trends of the articles in Math-Educational journals between 1998 and 2006 in a bid to discuss whether the articles evenly dealt with different fields and whether studies on elementary mathematics education were in line with the 7th national curricula. It's basically meant to determine some of the right directions for future research on elementary mathematics education. The articles included in Math-Educational journals during the selected period were analyzed to find out the theme, area, method and subjects of the studies and when the studies were conducted. After checking National Assembly Digital Library by inputting a keyword 'elementary mathematics', 235 articles were found, and a content analysis was carried out, and statistical data on percentage were obtained. The results of this study were as follows: First, there had been steady research efforts about elementary mathematics education, as 20 or 30 studies had been conducted on a yearly basis. Second, as for theme of research, the most common themes were instructional design and method(25.5%), and an analysis of curricula and textbook(15.3%) was the second most dominant theme. Third, regarding the area of study, the most widely investigated area was number and operation (30.0%), followed by character/expression(27.8%), figure (23.9%), regularity/function (8.9%), probability/statistics(5.6%), and measurement (3.9%). Fourth, concerning the method of research, didactical analysis(43.8%) was most prevalent, followed by quantitative research(29.8%), qualitative research(16.6%) and a combination of qualitative and quantitative approaches(9.8%). Fifth, as to subjects, many of the studies(21.7%) investigated upper graders. In conclusion, it has to be accomplished the impartial researches for the whole area in order to develop elementary mathematics education and attain the objects of the 7th national curricula.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.38-45
• /
• 2006

The superconducting fault current limiters(SFCLs) provide the effect such as enhancement in power system reliability due to limiting the fault current within a few miliseconds. Among various SFCLs we have developed a flux-lock type SFCL and exploited a special design to effectively reduce the fault current according to properly adjustable magnetic field after the short-circuit test. This SFCL consists of two copper coils wound in parallel on the same iron core and a component using the YBCO thin film connected in series to the secondary copper coil. Meanwhile, operating characteristics can be controlled by adjusting the inductances and the winding directions of the coils. To analyze the operational characteristics, we compared closed-loop with open-loop iron core. When the applied voltage was 200[Vrms] in the additive polarity winding, the peak values of the line current the increased up to 30.71[A] in the closed-loop and 32.01[A] in the open-loop iron core, respectively. On the other hand, in the voltages generated at current limiting elements were 220.14[V] in the closed-loop and 142.73[V] in the opal-loop iron core during first-half cycle after fault instant under the same conditions. We confirmed that the open-loop iron core had lower power burden than in the closed-loop iron core. Consequently, we found that the structure of iron core enabled the flux-lock type SFCL at power system to have the flexibility.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.408-421
• /
• 2012

The purpose of this study was to verify differences in changes of physical self-concept between Taekwondo participation group and non Taekwondo participation group in order to meet the needs of the study the limitations of previous studies had to be considered. The participants were elementary students in S city selected by this researcher. 30 students were in the Taekwondo participation group and 40 students were in the non Taekwondo participation group decided by ACSM(15) exercise guide line standard, three times repetition measurements per 12 weeks were executed for $2{\times}3$ mixed design with repeated measure. For this statistic, SPSS 12.0 for windows was used for technical statistic, two-way ANOVA, paired t-test, and independent t-test. The results were as follows; First, there were differences of change pattern in physical self-concept generally between Taekwondo participation group and non Taekwondo participation group. Second, there was a difference between Taekwondo exercise group and non Taekwondo exercise group according to 1st and 2nd, 1st and 3rd measurement point partially. Third, there were differences between the Taekwondo exercise group and non Taekwondo exercise group on the 2nd and 3rd measurement. In conclusion, Taekwondo discipline tended to have a large effect increasing physical self-concept.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.344-354
• /
• 2005

In this paper, we proposed a new lifting architecture for JPEG2000 and implemented to ASIC. We proposed a new cell to execute unit calculation of lifting using the property of lifting which is the repetitious arithmetic with same structure, and then recomposed the whole lifting by expanding it. After the operational sequence of lifting arithmetic was analyzed in detail and the causality was imposed for implementation to hardware, the unit cell was optimized. A new lifting kernel was organized by expanding simply the unit cell, and a lifting processor was implemented for Motion JPEG2000 using it. The implemented lifting kernel can accommodate the tile size of $1024{\times}1024$, and support both lossy compression using the (9,7) filter and lossless compression using (5,3) filter. Also, it has the same output rate as input rate, and can continuously output the wavelet coefficients of 4 types(LL, LH, HL, HH) at the same time. The implemented lifting processor completed a course of ASIC using $0.35{\mu}m$ CMOS library of SAMSUNG. It occupied about 90,000 gates, and stably operated in about 150MHz though difference from the used macro cell for the multiplier. Finally, the improved operated in about 150MHz though difference from the used macro cell for the multiplier. Finally, the performance can be identified in comparison with the previous researches and commercial IPs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.985-993
• /
• 2017

Objective: The objective of this study was to evaluate increasing doses of a novel microbial phytase (Cibenza Phytaverse, Novus International, St. Charles, MO, USA) on standardized total tract digestibility (STTD) of P in canola meal (CM), corn, corn-derived distiller's dried grains with solubles (DDGS), rice bran (RB), sorghum, soybean meal (SBM), sunflower meal (SFM), and wheat. Methods: Two cohorts of 36 pigs each (initial body weight = $78.5{\pm}3.7kg$) were randomly assigned to 2 rooms, each housing 36 pigs, and then allotted to 6 diets with 6 replicates per diet in a randomized complete block design. Test ingredient was the only dietary source of P and diets contained 6 concentrations of phytase (0, 125, 250, 500, 1,000, or 2,000 phytase units [FTU]/kg) with 0.4% of $TiO_2$ as a digestibility marker. Feeding schedule for each ingredient was 5 d acclimation, 5 d fecal collection, and 4 d washout. The STTD of P increased (linear or exponential $p{\leq}0.001$) with the inclusion of phytase for all ingredients. Results: Basal STTD of P was 37.6% for CM, 37.6% for corn, 68.6% for DDGS, 10.3% for RB, 41.2% for sorghum, 36.7% for SBM, 26.2% for SFM, and 55.1% for wheat. The efficiency of this novel phytase to hydrolyze phytate is best described with a broken-line model for corn, an exponential model for CM, RB, SBM, SFM, and wheat, and a linear model for DDGS and sorghum. Based on best-fit model the phytase dose (FTU/kg) needed for highest STTD of P (%), respectively, was 735 for 64.3% in CM, 550 for 69.4% in corn, 160 for 55.5% in SBM, 1,219 for 57.8% in SFM, and 881 for 64.0% in wheat, whereas a maximum response was not obtained for sorghum, DDGS and RB within the evaluated phytase range of 0 to 2,000 FTU/kg. These differences in the phytase concentration needed to maximize the STTD of P clearly indicate that the enzyme does not have the same hydrolysis efficiency among the evaluated ingredients. Conclusion: Variations in enzyme efficacy to release P from phytate in various feedstuffs need to be taken into consideration when determining the matrix value for phytase in a mixed diet, which likely depends on the type and inclusion concentration of ingredients used in mixed diets for pigs. The use of a fixed P matrix value across different diet types for a given phytase concentration is discouraged as it may result in inaccurate diet formulation.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.397-406
• /
• 1998

The Pyokkolche Reservoir was constructed as a major public project of the ancient agricultural society, 1600 years ago. From a hydraulic point of view, it is considered to have been carried out with a distinguished technology. It should be in particular noticed that for a consecutive banking the main stream was diverted and drained to the Yonpo stream and the dam with same sea levels on its top along the whole length was built in a nearly straight line in spite of the different sea levels between both ends on the bottom. These suggest that the carrying out artifice and surveying technigue of those days were considerably excellent. However, the insufficient plan and design at the time of the construction, the temporary management and the repeated repair works in the later ages caused the Pyokkolche to lose its function. The Changsaenggeo and Kyungjanggeo gate sites being the facilities for sluices composed of a simple span and a vertical lift hand-operated sing a pully. The advantage of the geographical characteristics at both ends of the main dam was scientifically taken to these sites which also functioned as a spillway against a flood. The gate site of Suyogeo must have been located in an entrance to Suwolri, the northern end of the Pyokkolche and Yutonggeo is presumed to have been located on the right of Sangsori, the southern end of the Pyokklche. Keywords : Pyokkolche Reservoir, construction technology, gate site location.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.351-355
• /
• 1996

Objective: To analyze the direct effect of nitre oxide, generated from sodium nitroprusside, on sperm motility and reactive oxygen species. Design: Human sperm samples were treated to allow swim-up and washing. And the samples were devided into four aliquots. Each aliquot was incubated with either concentration at 0, 100nM, $10{\mu}M$, 1mM of nitroprusside. Intervention: Samples were measured chemiluminosence for reactive oxygen species of each aliquot with concentrations at 0, 100nM, $10{\mu}M$, 1mM of nitroprusside at allowing swim-up and washing of sperm. Main Outcome Measures: Percent motion parameters and viability were asse-ssed at 0, 3, 6, 12, 24 hours incubation. Results: The percent viablity was lower slightly in control group (50.2%) than that in sperm treated with 100nM of nitroprusside(57.5%) at 24 hours after incubation, while was reduced significantly in sperm with concentra-tion of $10{\mu}M(42.1%)$ and 1mM(21.3%)of nitroprusside at 6 hours after incubation. And the sperm treated with 1mM of nitroprusside was immotile totally at 6 hours after incubation. The straight line$(35.3{\pm}5.6%)$, the rapid forward$(37.2{\pm}6.4%)$ and the weak curvilinear velocity$(9.6{\pm}2.4%)$were more favorable comparing with those ($32.4{\pm}4.2%$, $30.0{\pm}7.8%$ and $18.0{\pm}4.6%$ respectively) in control group at 3 hours after incubation, but reduced significantly in sperm treated with $10{\mu}M$ and 1mM of nitroprusside. The levels of reactive oxygen species in control(700 c.p.m.) is lower significantly than that in each experimental groups of sperm treated with nitroprusside. And the levels of reactive oxygen species were 2200 c.p.m. in 100nM, 6200c.p.m. in $1{\mu}M$ and 12800c.p.m. in 1mM respectively. Conclusion: These results suggested that the concentration of 100nM of nitroprusside on sperm is beneficial to the maintanance of viablity and motile velocity, but detriment in high concentration of $10{\mu}M$ or 1mM of nitroprusside.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.133-139
• /
• 2018

Keeping a proper straight route length under the marine bridge is one of the important factors for the safe passage of ships. However, according to port and harbor design standards, there is only a constant guideline of 8 times the length of the marine bridge underpass. On this study, we used the ES model to determine the ratio of risk to the route width, traffic volume, the degree of curvature of the route, and the length of the straight route in order to derive the optimal straight route distance. As a result, the risk ratio decreased by 2.27% as the route distance increased from 3L to 10L when the degree of curvature of the route was $45^{\circ}$. The risk associated with curvature was found to be 4.83% when the bending degree was changed from $0^{\circ}$ to $45^{\circ}$ in the case of 3L length. In addition, it was confirmed that the risk ratio according to the degree of curvature of the route and the straight route was reduced by 1.45% at maximum under the condition that the width of the line was 400m and the number of the vessels generated per hour was 20. It was verified that a straight route distance more than a certain length is needed depending on the congestion degree and the degree of curvature of the route when constructing the marine bridge.